Rpm's at 800

Shamrock · 12-03-2012, 11:09 AM

I have installed on my 2011 AT the stillen headers/cats, the akropovitch full system, and the k&n intakes. I also have a base tune from uprev. The car rpm is a little above the 500 line and is a little shaky. I've read that some of you have raised the rpm to 800 when tuning the car. Why is this? Will it reduce the shaking? Thanks

cheshirecat · 12-03-2012, 11:21 AM

500 is pretty low, even for a stock car, where normal rpm (AC off) is about 650ish.

I would definitely suggest raising the idle.

G37sHKS · 12-03-2012, 11:23 AM

My idle is at 800 RPM

Sh0velMan · 12-05-2012, 10:21 AM

Yeah 500 is low. I'd do 700-800.

Mine is @ 1100 (due to an issue with the intakes I have at the moment) just to get it smooth, haha!

12-03-2012, 11:09 AM	#1 (permalink)
Shamrock Base Member Join Date: Apr 2012 Location: Israel Posts: 215 Drives: 370z 2011 AT White Rep Power: 13	Rpm's at 800 I have installed on my 2011 AT the stillen headers/cats, the akropovitch full system, and the k&n intakes. I also have a base tune from uprev. The car rpm is a little above the 500 line and is a little shaky. I've read that some of you have raised the rpm to 800 when tuning the car. Why is this? Will it reduce the shaking? Thanks

12-03-2012, 11:23 AM	#3 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	My idle is at 800 RPM __________________ G37 BUILD UNDER CONSTRUCTION

12-05-2012, 10:21 AM	#4 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Yeah 500 is low. I'd do 700-800. Mine is @ 1100 (due to an issue with the intakes I have at the moment) just to get it smooth, haha! __________________ Buy My Car! \| Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thoughts on Engine Sound at High RPM's (kinda long)	jtsmith1	Engine & Drivetrain	44	07-04-2014 03:27 PM
a strange noise in the high RPM's	Kaiser370z	Engine & Drivetrain	5	10-09-2012 11:37 AM
Rattle from Gear Shift Knob @ High RPM's	ksm144	Exterior & Interior	4	10-11-2011 12:43 AM

12-03-2012, 11:21 AM	#2 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	500 is pretty low, even for a stock car, where normal rpm (AC off) is about 650ish. I would definitely suggest raising the idle.