what next? headers?

JC671 · 11-17-2012, 06:20 PM

Quote:

Originally Posted by leighspped

i have to do more reading... hadn't heard about them before now and im surprised more people wouldn't be running them if its a solid 10whp

headers (long tube) are great if you dont mind running without cats and the pain in the *** to install

I'm just waiting for the delivery of my headers and contemplating doing the install myself at our local hobby shop with a lift or do just not deal with it and pay.

What did you do? If you installed yourself and had to do it again would you just pay someone?

Vichtz · 11-17-2012, 06:22 PM

ok I was looking at headers and was wondering kind of what has been touched on here. I'm running stillen gen3's and exhaust ,so I was thinking stillens HFC and headers was also a good route? I want to stay legal as this is my daily driver so does that mean LTH are out of the question?

JC671 · 11-17-2012, 06:23 PM

[QUOTE=Vichtz;2020751 I want to stay legal as this is my daily driver so does that mean LTH are out of the question?[/QUOTE]

Yes LTH are out as well as TPs. You need a cat to be able to pass smog if they smog test in your state

elperuano · 11-17-2012, 06:50 PM

I'm surprised at how much people do headers compared to the previous VQ motor. Most could not justify cost and installation for the gains. Is the gains that much better than the DE motor?

SPOHN · 11-17-2012, 07:01 PM

Quote:

Originally Posted by elperuano

I'm surprised at how much people do headers compared to the previous VQ motor. Most could not justify cost and installation for the gains. Is the gains that much better than the DE motor?

Yes it is. I've seen three cases where they are, so I went this route to. I had no luck with headers on my DE motor before. But with the Momentum headers and the way there designed with the collectors inside makes them better than most. So when combined with our new motors it just works.

binary0x01 · 11-17-2012, 07:19 PM

Quote:

Originally Posted by SPOHN

The Momentum 350Z DE headers.

Won't the test pipse stink up the inside? you have to use em right?

asdfsammich · 11-17-2012, 07:22 PM

So momentum are short?

Headers > TP > CBE

?

Tapatalk & such etc

SPOHN · 11-17-2012, 07:30 PM

Quote:

Originally Posted by binary0x01

Won't the test pipse stink up the inside? you have to use em right?

Not really. I smell raw fumes when at ideal or coming to a stop when windows are down. But I love that. I guess you could run HFC from a 350 but dont remotely expect the gains.

Quote:

Originally Posted by asdfsammich

So momentum are short?

Headers > TP > CBE

?

Tapatalk & such etc

Yes.

http://www.z1motorsports.com/350_g35...oducts_id=5077

Chuck33079 · 11-17-2012, 07:49 PM

That's the smell of power.

MJB · 11-17-2012, 07:53 PM

Quote:

Originally Posted by SPOHN

Yes it is. I've seen three cases where they are, so I went this route to. I had no luck with headers on my DE motor before. But with the Momentum headers and the way there designed with the collectors inside makes them better than most. So when combined with our new motors it just works.

I bought the same headers along with 350z Berk TP's. SPOHN, I'm assuming you are going to do the install yourself? I'm not sure I'm brave enough to tackle this since I'm in a corporate apartment complex... however since I'm in Texas, UPREV is right down the road so I may see what they'll charge with install and a tune

SPOHN · 11-17-2012, 07:57 PM

Quote:

Originally Posted by MJB

I bought the same headers along with 350z Berk TP's. SPOHN, I'm assuming you are going to do the install yourself? I'm not sure I'm brave enough to tackle this since I'm in a corporate apartment complex... however since I'm in Texas, UPREV is right down the road so I may see what they'll charge with install and a tune

Sure am. Tomorrow. It's the third time I've done it so I know a lot of tricks and certain tools to help a lot. Course being the radiator core support is off it's a lot easier. The stock manifolds are off already so I just have to slap these on.

leighspped · 11-17-2012, 08:51 PM

Quote:

Originally Posted by MJB

I bought the same headers along with 350z Berk TP's. SPOHN, I'm assuming you are going to do the install yourself? I'm not sure I'm brave enough to tackle this since I'm in a corporate apartment complex... however since I'm in Texas, UPREV is right down the road so I may see what they'll charge with install and a tune

Lol that how I got my Z kicked out of my parking garage but with a short throw

pseftis · 11-21-2012, 07:49 AM

Quote:

Originally Posted by SPOHN

Will be putting my headers on tomorrow. Woot

Did u do a before and after dyno comparison??

SPOHN · 11-21-2012, 07:56 AM

Quote:

Originally Posted by pseftis

Did u do a before and after dyno comparison??

No I didn't. Every tIme I've been on the dyno before headers I've hit between 305 and 310whp. So I'll be using that after I get tuned with my headers.

pseftis · 11-21-2012, 01:43 PM

Quote:

Originally Posted by SPOHN

No I didn't. Every tIme I've been on the dyno before headers I've hit between 305 and 310whp. So I'll be using that after I get tuned with my headers.

Ok cool! Keep me posted when u do pls! Thx

11-17-2012, 06:22 PM	#17 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	ok I was looking at headers and was wondering kind of what has been touched on here. I'm running stillen gen3's and exhaust ,so I was thinking stillens HFC and headers was also a good route? I want to stay legal as this is my daily driver so does that mean LTH are out of the question? __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

11-17-2012, 06:23 PM	#18 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	[QUOTE=Vichtz;2020751 I want to stay legal as this is my daily driver so does that mean LTH are out of the question?[/QUOTE] Yes LTH are out as well as TPs. You need a cat to be able to pass smog if they smog test in your state __________________ A special "Thank You" to the Fast Intentions Crew! "Fueled By Passion"

11-17-2012, 07:49 PM	#24 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	That's the smell of power. SPOHN likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Oem headers	second2none	Parts for sale (Private Classifieds)	4	10-22-2012 05:29 PM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 11:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	0	03-01-2012 03:20 AM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 06:36 PM
best headers?	Kcuba370z	Intake/Exhaust	12	08-30-2010 04:53 PM

11-17-2012, 06:50 PM	#19 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	I'm surprised at how much people do headers compared to the previous VQ motor. Most could not justify cost and installation for the gains. Is the gains that much better than the DE motor?

11-17-2012, 07:22 PM	#22 (permalink)
asdfsammich Enthusiast Member Join Date: Dec 2011 Location: Southern California Posts: 456 Drives: 09 370Z SR MT Rep Power: 13	So momentum are short? Headers > TP > CBE ? Tapatalk & such etc