Use CSF Radiator's Internal Radiator for ATs for Oil Cooler?

Nixlimited · 11-01-2012, 10:58 AM

Quote:

Originally Posted by gomer_110

OP, thought about doing this myself. I think viscosity differences would be a mute point. Just don't know if 7 row would be anywhere near enough though.

I'd really like to see some one do a oil cooling setup that uses the engine coolant as the cooling medium instead of the normal air to oil coolers. On a road course the air coolers are fine, but for autocross or anything stop and go related there's no air flow across the cooler.

Keep us updated on the results if you actually do this.

Yeah, I may try it. May have to contact CSF directly to see about fittings, though. Even though it is only a 7-Row, the heat capacity of coolant is orders of magnitude higher than air--particularly when there is little air flow at low speeds.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
HKS Internal Wastegate Actuator	G37sHKS	Forced Induction	3	09-13-2011 04:16 PM
Oil Cooler - any issues with covering radiator?	EgoTrip	Engine & Drivetrain	10	06-07-2011 05:03 PM
Random 500 Internal Server Errors...	DIGItonium	The370Z.com Feedback, Suggestions & Questions	3	12-17-2009 04:27 AM