10-24-2012, 07:44 PM
|
#9 (permalink)
|
|
Track Member
Join Date: Feb 2009
Location: so cal
Posts: 793
Drives: 2009 370Z 6MT
Rep Power: 271
|
Quote:
Originally Posted by wind.zero
^^
This
Find out if you have a code that is not throwing the CEL. I had this and it was a small adjustment in my tune but your description is almost exactly what was happening to me. It was definitely limp mode. A restart of the car, or several restarts, usually fixed it.
My problem tracked backed to a MAP issue in the tune. Did you wash or detail the engine recently? The paste below was the troubleshooting path I followed:
It is probably worth a shot to the check the MAP sensors:
1) Harness or connectors
2) Mass air flow sensor
3) MAP sensor
4) Evap pressure sensor
5) Intake air leaks
6) Intake air temperature sensor
Good luck. Limp mode sucks.
|
MAF also crossed my mind as i havent cleaned it as of late...
__________________
Stillen G3 CAI*Stillen CBE*Berk's HFC*Eibach Prokit*Hotchkis Sways* ichiba 15/20mm spacers*? Oil cooler*Stillen Pulley*Stillen Headers
|
|
|
Similar Threads
Threaded Mode
