Oh boy... Oil change mishap, need advice

Lug · 10-25-2012, 09:29 AM

Quote:

Originally Posted by edconline

Thanks again for the replies. I'm away for six weeks so ill have to tackle this around Christmas. Was thinking about a flexible camera with light and pickup tool integrated like they use in surgery (but those have lasers for micro cuts). Probably hard to find, but would be great for this lol.

Suction......Torque wrench....whoa! We've got a leaker! CLAMPS!

wstar · 10-25-2012, 09:38 AM

Yeah I wouldn't take the "let it burn/shred" route either. Too many possibilities for something to go wrong if it clogs up an oil passage somewhere. Then again most of these that I've seen are plastic-coated paper, too, so maybe I'm not correctly picturing just how flimsy and fragile it is.

Pulling the valve cover is pretty trivial once you get past the basic stuff you have to do first for access (e.g. removing the air intake on one side at least, maybe the upper intake manifold as well for access to the bolts, not sure).

Rusty · 10-25-2012, 10:48 AM

Just to scare the crap out of you. Back in the day. I had a slant 6 that lost an oil pump because of a piece of valve seal. When I replaced the old pump with the new pump. I tore apart the old pump. I found the piece had wedged between the rotors. Locking up the pump. The piece wasn't very big either.

10-25-2012, 09:38 AM	#32 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Yeah I wouldn't take the "let it burn/shred" route either. Too many possibilities for something to go wrong if it clogs up an oil passage somewhere. Then again most of these that I've seen are plastic-coated paper, too, so maybe I'm not correctly picturing just how flimsy and fragile it is. Pulling the valve cover is pretty trivial once you get past the basic stuff you have to do first for access (e.g. removing the air intake on one side at least, maybe the upper intake manifold as well for access to the bolts, not sure). __________________ 7AT Track Car! Journal thread / Car setup details

10-25-2012, 10:48 AM	#33 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,222 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Just to scare the crap out of you. Back in the day. I had a slant 6 that lost an oil pump because of a piece of valve seal. When I replaced the old pump with the new pump. I tore apart the old pump. I found the piece had wedged between the rotors. Locking up the pump. The piece wasn't very big either. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Oil Change, change to synthetic?	JungleZ	Nissan 370Z General Discussions	29	08-27-2014 05:40 PM
oil change	jimmythebull	Nissan 370Z General Discussions	3	05-25-2012 09:57 PM
Fun Track Day, Little Mishap	spearfish25	Track / Autocross / Drifting / Dragstrip	48	08-19-2010 08:24 AM
First oil change coming up, need some advice.	Vegitto-kun	Engine & Drivetrain	40	07-09-2010 06:31 PM
1st Oil Change	tooohip	Mid-Atlantic Region	4	06-25-2009 08:50 PM