ITB's on a VQ?

Megan370z · 09-25-2012, 07:07 PM

Quote:

Originally Posted by 370Z Purist

Why couldn't we basically "adapt" the vq35 ITBs onto the VQ37? I'm sure that's what would be done if we had a performance house that would actually do it. I'm also sure some race team out there would try this...

having to control the VVEL
I doubt it will happen

Red__Zed · 09-25-2012, 07:49 PM

Quote:

Originally Posted by 370Z Purist

Multiple butterfly valves along the length of the ITB.

atx370z · 09-25-2012, 07:53 PM

Shops that provide aftermarket parts are too busy constructing body kits and carbon fiber dash trim.

Me personally would rather dump 15k in to a killer n/a build than spend 10k on forced induction.

edub370 · 09-25-2012, 08:14 PM

Quote:

Originally Posted by Megan370z

having to control the VVEL
I doubt it will happen

350z had vvel...

Red__Zed · 09-25-2012, 08:20 PM

Quote:

Originally Posted by atx370z

Shops that provide aftermarket parts are too busy constructing body kits and carbon fiber dash trim.

Me personally would rather dump 15k in to a killer n/a build than spend 10k on forced induction.

I'd rather actually make power

Quote:

Originally Posted by edub370

350z had vvel...

wat

shadoquad · 09-25-2012, 08:21 PM

Quote:

Originally Posted by edub370

350z had vvel...

I don't think so. That was new for the 370z iirc.

W.O.W. 370Z · 09-25-2012, 08:35 PM

Quote:

Originally Posted by edub370

350z had vvel...

No sir.

Sent from my PG86100 using Tapatalk 2

edub370 · 09-25-2012, 08:37 PM

I fail. Just did some searching. For some reason i thought the hr's did...

Carry on!

How do we make this happen?

Rusty · 09-26-2012, 12:38 AM

Quote:

Originally Posted by edub370

I fail. Just did some searching. For some reason i thought the hr's did...

Carry on!

How do we make this happen?

A boat load of money. $$$$$$$$$$$$$$$$$ If you're willing to pay the price. It can be done.

JC671 · 09-29-2012, 06:21 PM

Oh man, I've been searching for An ITB setup for awhile for our cars. The power gained compared to the $$$$ spent is usually not on par but it's sexy as hell!

I used to have an RSX Type S and when the ITB's came out. Lots made the jump but the thing that held me back was the fact that most of them were reporting that their were having issues constantly just to get the car running right whenever a change of weather happened. It was very sensitive for the K20 motor and it's what drove me to go Turbo back then because I didn't want to keep paying for tuning when things changed.

I'm really upset of the lack of aftermarket support for the 370z. I mean geez Civics, STIs and Evos have multiple huge companies constantly making things for their platforms even before the newer model comes out.

The 370 has been out since '09 and really we don't have much options at all when it comes to performance mods. I can care less about aesthetic mods but respect those who do them. When it comes to N/A, after basic full bolt-ons we basically have no where else to go.. Jun has a "mild" cam out. VVEL has not been cracked yet. So we are force to go SC or TT if we want more power.

So besides GTM, only other place for us to go is Stillen or Greddy. Unless one goes full custom which the average buyer won't know how to peice their own kit. It sucks.

09-25-2012, 07:53 PM	#18 (permalink)
atx370z Track Member Join Date: Aug 2010 Location: Austin, TX Posts: 637 Drives: 10 370Z T/S M6 Rep Power: 16	Shops that provide aftermarket parts are too busy constructing body kits and carbon fiber dash trim. Me personally would rather dump 15k in to a killer n/a build than spend 10k on forced induction. __________________ Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's

09-25-2012, 08:37 PM	#23 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	I fail. Just did some searching. For some reason i thought the hr's did... Carry on! How do we make this happen? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

09-29-2012, 06:21 PM	#25 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	Subscribed.... Oh man, I've been searching for An ITB setup for awhile for our cars. The power gained compared to the $$$$ spent is usually not on par but it's sexy as hell! I used to have an RSX Type S and when the ITB's came out. Lots made the jump but the thing that held me back was the fact that most of them were reporting that their were having issues constantly just to get the car running right whenever a change of weather happened. It was very sensitive for the K20 motor and it's what drove me to go Turbo back then because I didn't want to keep paying for tuning when things changed. I'm really upset of the lack of aftermarket support for the 370z. I mean geez Civics, STIs and Evos have multiple huge companies constantly making things for their platforms even before the newer model comes out. The 370 has been out since '09 and really we don't have much options at all when it comes to performance mods. I can care less about aesthetic mods but respect those who do them. When it comes to N/A, after basic full bolt-ons we basically have no where else to go.. Jun has a "mild" cam out. VVEL has not been cracked yet. So we are force to go SC or TT if we want more power. So besides GTM, only other place for us to go is Stillen or Greddy. Unless one goes full custom which the average buyer won't know how to peice their own kit. It sucks. __________________ A special "Thank You" to the Fast Intentions Crew! "Fueled By Passion" Last edited by JC671; 09-29-2012 at 07:53 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ITB's?	regisbou	Intake/Exhaust	21	07-06-2009 09:54 PM