mine is SMOOTH AS BUTTER
|
|
LinkBack | Thread Tools | Display Modes |
09-03-2012, 12:41 PM | #18 (permalink) |
A True Z Fanatic
Join Date: Aug 2010
Location: Lawrenceville,Ga
Posts: 4,293
Drives: My foot up your azz
Rep Power: 30 |
This the stuff I use in my Harley trans and it not nearly as clunkly,I will use this on my 6sp when I change it.
Red Line Oil Heavy Shockproof Gear Oil (58204) on eBay!
__________________
2013 ZL1 754 rwhp 747 rwtq |
09-07-2012, 04:49 PM | #20 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Cocoa, Florida
Age: 42
Posts: 5,075
Drives: Pantydropper machine
Rep Power: 33 |
If you post stupidity, you don't know how to drive.
I grind from 1st to 2nd sometimes at higher rpm. At first I thought I wasn't clutching all the way so I made a conscious effort to go all the way to the floor. Still happens. Same thing, skip shifting is sketchy. I took it to the dealership a few months ago, they "couldn't recreate the problem". I'm taking it back again soon. Sent from my iPizzle using magic and new-fangled science stuff
__________________
VLEDS | Evo-R | Moddiction | CF Hood Struts | F.I. CF CBE & LTH | Stillen CAI | NST Pulleys | UpRev | Z1 | M7 | Status | Forgestar | PSS | Whiteline | SPL | SPC | Kenwood | Zenclosure | Kicker | Alpine Type R
|
09-07-2012, 04:49 PM | #21 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42 |
Huck, I've come to accept the fact that the high RPM 1-2 shift is a hit or miss. With the other gears I don't completely take my foot off the accelerator pedal, and I can achieve some fast high RPM shifts. As long as I can daily drive without the 5th gear hiccup, I'll be fine. Everything else is smooth now.
You're kidding, right? I'm a smooth and fast shifter. Explain to me how I know how to daily drive a twin turbo 370Z.
__________________
Last edited by DIGItonium; 09-07-2012 at 04:54 PM. |
09-07-2012, 04:53 PM | #22 (permalink) |
A True Z Fanatic
Join Date: Aug 2010
Location: Lawrenceville,Ga
Posts: 4,293
Drives: My foot up your azz
Rep Power: 30 |
I've learned from past experience that the more power you have the harder driving a stick becomes,so I imagine that a twin turbo would be hard I'll let you know after I put my SC in.
__________________
2013 ZL1 754 rwhp 747 rwtq |
09-07-2012, 05:00 PM | #23 (permalink) | |
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42 |
Quote:
Seriously, though, that's not always the case. With daily driving, the car is pretty much stock since it is hardly in boost. When I'm in boost, it's typically half throttle around 3-4k RPM. That's usually when I'm getting on the freeway or trying to catch up in traffic. The 1st transmission endured more punishment. With the 2nd transmission, I only had it for 3 months and it did not endure much punishment due to extreme hot weather over the summer. What's interesting is the gearbox for all 3 transmissions (including the original) feel quite a bit different. The newest one feels so might tighter, and there is slightly more resistance. It's not notchy, but I can definitely feel the gears or something. What I find different is a noticeably louder whine in 2nd that I didn't hear before with the other transmissions. So far no issues getting in any of the gears. No notchiness.
__________________
|
|
09-07-2012, 05:12 PM | #24 (permalink) | |
A True Z Fanatic
Join Date: Aug 2010
Location: Lawrenceville,Ga
Posts: 4,293
Drives: My foot up your azz
Rep Power: 30 |
Quote:
Why the hell did you have to have 3 tranmission?
__________________
2013 ZL1 754 rwhp 747 rwtq |
|
09-07-2012, 05:26 PM | #25 (permalink) | |
A True Z Fanatic
Join Date: Jan 2012
Location: Cocoa, Florida
Age: 42
Posts: 5,075
Drives: Pantydropper machine
Rep Power: 33 |
Quote:
Sent from my iPizzle using magic and new-fangled science stuff
__________________
VLEDS | Evo-R | Moddiction | CF Hood Struts | F.I. CF CBE & LTH | Stillen CAI | NST Pulleys | UpRev | Z1 | M7 | Status | Forgestar | PSS | Whiteline | SPL | SPC | Kenwood | Zenclosure | Kicker | Alpine Type R
|
|
09-07-2012, 07:39 PM | #26 (permalink) | |
A True Z Fanatic
Join Date: Apr 2011
Location: Indiana
Posts: 3,766
Drives: '15 NISMO 6MT
Rep Power: 117171 |
Quote:
|
|
09-08-2012, 02:29 AM | #27 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42 |
The first one is stock. I'm on my 2nd.
I'm sure it is known the Z transmission does not like super fast shifts. I went through the same ordeal with the '03 350Z.
__________________
|
09-12-2012, 12:23 PM | #28 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: San Diego CA
Posts: 1,103
Drives: Classified
Rep Power: 15 |
I rarely grind from 1st to 2nd and that was because of human error(only happened twice)
I don't drive it to hard though and when I do, I don't have any problems unless I'm being stupid |
09-12-2012, 07:31 PM | #29 (permalink) | |
A True Z Fanatic
Join Date: May 2009
Location: Halifax
Posts: 1,659
Drives: '13 CTS-V, '76 Vette
Rep Power: 27 |
Quote:
__________________
"America.... still builds rockets!" Vette: 355 cid, 400 rwhp '13 CTS-V Coupe: 6.2L LSA, 556HP Last edited by IDZRVIT; 09-12-2012 at 07:42 PM. |
|
09-12-2012, 11:33 PM | #30 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42 |
Um. No? What's there to prove that I can't drive a manual? It's a daily driven vehicle. It's not rocket science for the past 10 years of driving a manual. How the heck can I screw up 5th? It's not even a gear to drive hard in.
The first transmission failed after the clutch disk fused to the flywheel. Part of that problem was due to a defect in the aftermarket clutch disk that made it difficult to get in and out of gear. After fixing the flywheel and getting a new disk, 3rd gear (last gear it was stuck on) started to grind whenever RPMs exceeded 3k. The grinding got progressively worse, so I ended up getting a new transmission. I did a few tests, and the car drove great. Then I dealt with record heat all summer, so I didn't get to drive the car as hard. Even if I wanted to drive it hard it's as easy as flooring it while in gear. What's so hard about that? After a month I notice difficulty getting into 5th. It took more effort than usual to get it in gear. All the other gears were buttery smooth. So I ignored it for 2 more months as it progressively got worse. Replacing the fluids with Redline didn't help either. My tech took it for a test drive and had issues getting into 5th as he was exiting the freeway and suggested the replacement. So the one I have now is about 2 weeks old, and it's doing very well. This thread is to share experiences with failed transmissions, not about who can or can't drive a manual. If some of you don't have anything valuable to contribute, then
__________________
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sticky: (Official) 370Z Clutch Pressure (CSC) Failures | DIGItonium | Engine & Drivetrain | 1827 | 03-20-2023 05:39 PM |
**STICKY** How much did you pay for your 370Z?**STICKY** | Slidefox | New 370Z Owner | 829 | 12-19-2022 02:42 PM |
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY] | AK370Z | Australia/New Zealand | 155 | 03-20-2021 08:35 AM |
Any one else had two 6mt transmission failures in 36000 | ALFIRADO | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 11 | 01-13-2012 06:09 PM |
Camaro Transmission failures from.... launch control...imagine that | MC | Other Vehicles | 29 | 07-15-2009 04:13 PM |