08-20-2012, 08:16 PM
|
#1 (permalink)
|
|
Enthusiast Member
Join Date: Aug 2012
Location: Ontario Canada
Posts: 345
Drives: 09' G37S Coupe
Rep Power: 13
|
Quote:
Originally Posted by Bandit_Kaine
Is there a "stock" setting on this clutch.. something like if I don't like it i can set it at the stock setting and it'll act just like the stock clutch pedal?
I have a stock clutch but my shifts are jerky as it seems i can't keep my leg steady while pulling out the clutch and the engagement window is too small for me to try and smooth it out. Would this pedal be recommended in this case?
|
Bandit_Kaine, yes you can dial the settings right back to stock if you wish by simply turning the fulcrum point adjustment wheel to the right. From the fully stock position (0% Fulcrum Setting) you can then adjust the engagement width as much as you like up to 10 full turns of adjustment wheel to the left for 100% of the available fulcrum adjustment travel.
Increasing from 0% will lower the friction point and widen out the engagement window so you can modulate the pedal much easier for smoother launches and much nicer shifts. Once you've adjusted the engagement width to your liking you can then independantly adjust the friction point to where you're most comfortable as well.
|
|
|
Similar Threads
107Likes
Hybrid Mode
