Review: RJM AFP Clutch Pedal System

Ryan @ RJM · 07-16-2017, 11:01 AM

Quote:

Originally Posted by nis350

Does that lessen the amount of disengagement on the clutch and cause it to drag/notchiness?

Nis350, it's completely adjustable for each individual's preference and clutch type. When properly adjusted the engagement can be lowered significantly towards the floor while still ensuring complete clutch disengagement. In fact part of the adjustment process is specifically testing to ensure full disengagement before finalizing the settings to ensure no drag or notchy shifting from engagement being too low.

Ryan @ RJM · 07-16-2017, 11:07 AM

Quote:

Originally Posted by McLovin2010

That sounds magnificent!!!! exactly what I've been wanting out of the clutch. props for continually advancing your already amazing clutch pedal. I will be in contact with you when im ready to switch out the v1. Do i have to do a whole new purchase or is there a way to just update the one i have? or do you do any discount for previous owners?

McLovin2010, thanks for the props. As both designer & fabricator of these I'm always taking feedback from customers and striving to improve the adjustability while working to reduce the complexity of install/install time. While the Rev1/2/3 all look very similar the current Rev3 is a complete redesign and doesn't share a single component in common with the earlier units so a complete replacement would be needed. Shoot me an email when you're ready and I'd be happy to work something out as a returning customer.
Best Regards
Ryan@RJM

40 to 332 · 07-16-2017, 11:33 AM

Just completed an install of the RJM HD Clutch Master Cylinder (CMC) along with a re-install of the RJM Ver 3 Clutch Pedal Assembly. Great products ... and always great service from Ryan. He even provided instructions over his personal cell phone when travelling back from a visit to Niagara Falls with his family! Can't beat his products or his service. Thanks Ryan!

Ryan @ RJM · 07-16-2017, 06:14 PM

Quote:

Originally Posted by 40 to 332

Just completed an install of the RJM HD Clutch Master Cylinder (CMC) along with a re-install of the RJM Ver 3 Clutch Pedal Assembly. Great products ... and always great service from Ryan. He even provided instructions over his personal cell phone when travelling back from a visit to Niagara Falls with his family! Can't beat his products or his service. Thanks Ryan!

40 to 332, You're Very Welcome!

V1H · 05-14-2019, 04:33 AM

Dear Ryan @ RJM, just wanted to raise my high interest in a RHD version of your famed Rev3.3 AFP Clutch Pedal System.
You may remember, I am the guy who helped you with photos to develop a RHD version of your HD CMC Rev2, back then.

My current combo of RJM HD CMC Rev2, ZSpeed HD CSC, and CompetitionClutch Stage 2 Street 2100 gives me a terribly stiff and heavy pedal feel with very early and narrow engagement, often jerky/sticky predal travel. And stop-and-go is a PITA.
I hope your pedal assy can easy my problem.

Best wishes
René

Bandit_Kaine · 05-29-2019, 09:18 PM

Has anyone had an issue when installing this pedal where the clutch does not engage?

I just finished install of v3.3 and followed all the instructions (except the clevis end upgrade, i left the stock one on) and when i put the car into first gear and release the clutch it seemed to be engaging fine.

I went out for a quick test drive, however it may not have been fully engaging, as it was slipping soon after, about 0.5 miles into my drive the clutch is not engaging at all, i put car in 1st gear and fully release clutch and car won't roll.

I adjusted the upper brown switch to such a way that it would be pressed just slightly as the pedal was fully released.

is there any adjustment for clutch engagement i should be looking at?

V1H · 05-30-2019, 02:47 AM

Quote:

Originally Posted by Bandit_Kaine

Has anyone had an issue when installing this pedal where the clutch does not engage?

I just finished install of v3.3 and followed all the instructions (except the clevis end upgrade, i left the stock one on) and when i put the car into first gear and release the clutch it seemed to be engaging fine.

I went out for a quick test drive, however it may not have been fully engaging, as it was slipping soon after, about 0.5 miles into my drive the clutch is not engaging at all, i put car in 1st gear and fully release clutch and car won't roll.

I adjusted the upper brown switch to such a way that it would be pressed just slightly as the pedal was fully released.

is there any adjustment for clutch engagement i should be looking at?

You may have to adjust your master cylinder rod lenght. Basically the position at which your clevis end is held in place with the nut
Best wishes

Sent from my iPhone using Tapatalk

dimmaz · 05-18-2020, 08:59 AM

Quote:

Originally Posted by V1H

Dear Ryan @ RJM, just wanted to raise my high interest in a RHD version of your famed Rev3.3 AFP Clutch Pedal System.
You may remember, I am the guy who helped you with photos to develop a RHD version of your HD CMC Rev2, back then.

My current combo of RJM HD CMC Rev2, ZSpeed HD CSC, and CompetitionClutch Stage 2 Street 2100 gives me a terribly stiff and heavy pedal feel with very early and narrow engagement, often jerky/sticky predal travel. And stop-and-go is a PITA.
I hope your pedal assy can easy my problem.

Best wishes
René

Hi [mention]Ryan RJM [/mention] Just a follow up on the initial request from [mention]V1H [/mention], has there been any further development on a RHD version?

When we spoke about a year ago you were finishing up on a prototype for testing. Please let us know as we are very keen to get this product.

Thanks

07-16-2017, 11:33 AM	#213 (permalink)
40 to 332 Enthusiast Member Join Date: Apr 2013 Location: Kimberley, BC, CANADA Posts: 452 Drives: 13 370Z BS M6 Sport Rep Power: 439	Just completed an install of the RJM HD Clutch Master Cylinder (CMC) along with a re-install of the RJM Ver 3 Clutch Pedal Assembly. Great products ... and always great service from Ryan. He even provided instructions over his personal cell phone when travelling back from a visit to Niagara Falls with his family! Can't beat his products or his service. Thanks Ryan! JARblue, Ryan @ RJM and McLovin2010 like this.

05-14-2019, 04:33 AM	#215 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	Dear Ryan @ RJM, just wanted to raise my high interest in a RHD version of your famed Rev3.3 AFP Clutch Pedal System. You may remember, I am the guy who helped you with photos to develop a RHD version of your HD CMC Rev2, back then. My current combo of RJM HD CMC Rev2, ZSpeed HD CSC, and CompetitionClutch Stage 2 Street 2100 gives me a terribly stiff and heavy pedal feel with very early and narrow engagement, often jerky/sticky predal travel. And stop-and-go is a PITA. I hope your pedal assy can easy my problem. Best wishes René __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

05-29-2019, 09:18 PM	#216 (permalink)
Bandit_Kaine Base Member Join Date: Jun 2012 Location: Miami Age: 34 Posts: 224 Drives: 16-370Z Nismo-PW-MT Rep Power: 13	Has anyone had an issue when installing this pedal where the clutch does not engage? I just finished install of v3.3 and followed all the instructions (except the clevis end upgrade, i left the stock one on) and when i put the car into first gear and release the clutch it seemed to be engaging fine. I went out for a quick test drive, however it may not have been fully engaging, as it was slipping soon after, about 0.5 miles into my drive the clutch is not engaging at all, i put car in 1st gear and fully release clutch and car won't roll. I adjusted the upper brown switch to such a way that it would be pressed just slightly as the pedal was fully released. is there any adjustment for clutch engagement i should be looking at? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
light clutch pedal?	boosted180	Engine & Drivetrain	21	06-07-2014 02:53 PM
My clutch pedal became useless for a little while...	Vbp6US	Engine & Drivetrain	17	07-01-2012 06:48 PM
Clutch pedal gone bad	brakedrift12	Nissan 370Z General Discussions	5	07-04-2011 11:09 PM
clutch pedal issues?	xgrudgex	Engine & Drivetrain	17	01-31-2011 09:44 PM
Knock from the clutch pedal	Oscar135	Engine & Drivetrain	34	07-27-2010 01:10 PM