Flywheel & Clutch

binary0x01 · 06-08-2012, 03:40 PM

Hey guys,

I was wondering what experience people had after upgrading their clutch and flywheel from stock.

Please list the parts' brands you've upgraded to and what you like/dislike and if possible price(s) you've paid for the hardware, and prices for the labor to have it done (if it wasn't a d.i.y job o'course).

Thanks in advance.

DIGItonium · 06-08-2012, 04:55 PM

I have the Southbend full face ceramic disk, pressure plate, and one piece flywheel. It chatters a little bit at low speed, but it's not annoying. I also have the HD CSC to handle the heavier pressure plate. Once installed and bleed properly, it feels slightly heavier than stock and the engagement feels great. I'm sure everyone hates the numb light clutch pressure feeling.

Talk to Joe@ZSpeed. He provided valuable advice to bleed the clutch properly with these cars since it's tough to get all the air bubbles out. The end result is consistent pedal pressure regardless of temperature with very little free play.

binary0x01 · 06-08-2012, 06:25 PM

Should I get a clutch along with the lighter flywheel?

How much should it be about? $300 to $400 or so to install?

SPOHN · 06-08-2012, 09:28 PM

Quote:

Originally Posted by binary0x01

Should I get a clutch along with the lighter flywheel?

How much should it be about? $300 to $400 or so to install?

Yes you should. And the price is about right, 400 range

binary0x01 · 06-09-2012, 04:12 PM

Thank you

06-08-2012, 03:40 PM	#1 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	Flywheel & Clutch Hey guys, I was wondering what experience people had after upgrading their clutch and flywheel from stock. Please list the parts' brands you've upgraded to and what you like/dislike and if possible price(s) you've paid for the hardware, and prices for the labor to have it done (if it wasn't a d.i.y job o'course). Thanks in advance.

06-08-2012, 04:55 PM	#2 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	I have the Southbend full face ceramic disk, pressure plate, and one piece flywheel. It chatters a little bit at low speed, but it's not annoying. I also have the HD CSC to handle the heavier pressure plate. Once installed and bleed properly, it feels slightly heavier than stock and the engagement feels great. I'm sure everyone hates the numb light clutch pressure feeling. Talk to Joe@ZSpeed. He provided valuable advice to bleed the clutch properly with these cars since it's tough to get all the air bubbles out. The end result is consistent pedal pressure regardless of temperature with very little free play. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for DIY Clutch and Flywheel	V8Killer	Engine & Drivetrain	3	07-21-2011 04:01 AM
JWT Clutch&Flywheel VS Nismo Clutch&Flywheel	hyunsoo1803	Engine & Drivetrain	3	05-05-2011 08:57 PM
New flywheel + clutch?	miguez	Engine & Drivetrain	21	05-30-2009 12:03 AM

06-08-2012, 06:25 PM	#3 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	Should I get a clutch along with the lighter flywheel? How much should it be about? $300 to $400 or so to install?

06-09-2012, 04:12 PM	#5 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	Thank you