Drain plug on oil cooler..?

JAYNO20 · 05-20-2012, 03:46 AM

Has anyone ever tried this? I mean can it be added in?

Loki · 05-20-2012, 08:41 AM

SO U should have one filler plug and one drain plug

370Z Purist · 05-20-2012, 08:46 AM

Quote:

Originally Posted by Loki

SO U should have one filler plug and one drain plug

JAYNO20 · 05-21-2012, 01:21 PM

Quote:

Originally Posted by 370Z Purist

ditto

roy'sz · 05-22-2012, 01:54 AM

bwahahahahahaha are you serious?

Vbp6US · 05-22-2012, 05:13 PM

Quote:

Originally Posted by roy'sz

bwahahahahahaha are you serious?

What a useless post.

To be honest, I don't think there needs to be a drain plug because you have one in the oil pan.

MattP725 · 05-23-2012, 09:14 AM

Quote:

Originally Posted by Vbp6US

What a useless post.

To be honest, I don't think there needs to be a drain plug because you have one in the oil pan.

I think OP was meaning so you could drain the cooler when you change the oil (without removing it).

I was actually thinking this but there is a major problem... the cooler has rows, it isn't like a pan where all the oil gravitates to the bottom of hte unit. The only way to have a drain on an oil cooler would be to have some sort of removable seal on the bottom row which would be a big liability for a company to design and nearly impossible for a basic user to fabricate.

The possibility of leaking would be way too great and then you have a much bigger problem.

Loki · 05-23-2012, 12:37 PM

Quote:

Originally Posted by MattP725

I think OP was meaning so you could drain the cooler when you change the oil (without removing it).

I was actually thinking this but there is a major problem... the cooler has rows, it isn't like a pan where all the oil gravitates to the bottom of hte unit. The only way to have a drain on an oil cooler would be to have some sort of removable seal on the bottom row which would be a big liability for a company to design and nearly impossible for a basic user to fabricate.

The possibility of leaking would be way too great and then you have a much bigger problem.

Agree

Rusty · 05-23-2012, 01:09 PM

If you drain the cooler. You would need a way to refill it. As you would end up with an air pocket in it. When you would first start your engine after an oil change. The engine would run without oil pressure for about 30 seconds or more until the cooler could fill back up.

MattP725 · 05-23-2012, 01:50 PM

Quote:

Originally Posted by Rusty

If you drain the cooler. You would need a way to refill it. As you would end up with an air pocket in it. When you would first start your engine after an oil change. The engine would run without oil pressure for about 30 seconds or more until the cooler could fill back up.

When I first installed my kit I didn't put any oil in the cooler, only in the pan... I think it should be ok because when it is below 180 it is bypassing a good amount of oil (if you have a thermo plate) so there should be some pressure recirculating. I get what you are saying though.

roy'sz · 05-23-2012, 02:50 PM

Quote:

Originally Posted by Rusty

If you drain the cooler. You would need a way to refill it. As you would end up with an air pocket in it. When you would first start your engine after an oil change. The engine would run without oil pressure for about 30 seconds or more until the cooler could fill back up.

not true, air is vented off through the intake. your oil pump is a positive displacement driven pump off the pulley. plus the split happens after the oil pump at the filter and adapter. the oil returns back into the pan after it is cooled.

05-20-2012, 03:46 AM	#1 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	Drain plug on oil cooler..? Has anyone ever tried this? I mean can it be added in? __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

05-23-2012, 01:09 PM	#9 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	If you drain the cooler. You would need a way to refill it. As you would end up with an air pocket in it. When you would first start your engine after an oil change. The engine would run without oil pressure for about 30 seconds or more until the cooler could fill back up. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Magnetic Oil Drain Plug danger?	RedNismo	Nissan 370Z General Discussions	37	11-12-2015 07:52 AM
Socket Size for Oil Drain Plug?	jikhead	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	1	07-11-2011 10:37 PM
What size is oil drain plug?	bigrob126	Engine & Drivetrain	14	02-08-2011 08:50 PM
ordered a magnetic drain plug will this fit?	370zproject	Engine & Drivetrain	5	02-20-2010 11:37 PM
Replacement Drain Plug?	Solus	Engine & Drivetrain	10	02-17-2010 01:12 PM

05-20-2012, 08:41 AM	#2 (permalink)
Loki Base Member Join Date: Nov 2010 Location: AUSTRALIA Posts: 17 Drives: [09 NISSAN 370Z MT] Rep Power: 15	SO U should have one filler plug and one drain plug

05-22-2012, 01:54 AM	#5 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	bwahahahahahaha are you serious?