Built Manual Transmission

Ccarver · 07-31-2017, 09:46 AM

Quote:

Originally Posted by 1slow370

is there an option to weld third gear? at higher levels of power the brazing breaks loose.

I have not seen a broken one yet, but I would not hesitate the weld it and rebalance the assembly.

Sent from my iPhone using Tapatalk

Ccarver · 07-31-2017, 10:12 AM

Cdoxp800, what is the latest update on the unit in your car.

Sent from my iPhone using Tapatalk

1slow370 · 08-19-2017, 02:32 AM

Quote:

Originally Posted by Ccarver

I have not seen a broken one yet, but I would not hesitate the weld it and rebalance the assembly.

Sent from my iPhone using Tapatalk

that's great, yeah its about 700-750hp the brazing goes, had 2 or 3 old customers that had it happen at the strip. there used to be a gear shop in Australia that sold a laser welded replacement but it was almost $700 for the one gear/shaft.

kaliwraith · 10-23-2017, 12:22 PM

I've been getting grinding in 2nd gear and crunchy shifting in 3rd. Do you think a rebuild is a good option for me? This is my DD.

I changed my trans oil and differential oil this weekend to MT-85, still grinding, requires double clutch to shift smoothly.

R3drckt09 · 10-24-2017, 11:38 AM

So I read this whole thread but can't find where I can get a hold of these upgraded synchros? I've had my car for 4 years (been boosted for the last 3 years) and it's always scratched if I shift into 5th or 6th too quickly. I've just been living with it but I'd love to find a solution!

JARblue · 10-24-2017, 01:41 PM

Quote:

Originally Posted by R3drckt09

So I read this whole thread but can't find where I can get a hold of these upgraded synchros?

Reread Post #46

Rusty · 10-24-2017, 02:04 PM

Question. Is our manual tranny the same as in the 350Z?

JARblue · 10-24-2017, 02:13 PM

Doesn't look like it.
The 350Z MT part numbers start with 32010*****
The 370Z MT part numbers start with 320B0*****

cdoxp800 · 04-24-2018, 09:10 PM

Quote:

Originally Posted by Ccarver

Cdoxp800, what is the latest update on the unit in your car.

Sent from my iPhone using Tapatalk

Hey man. The Transmission has been doing GREAT. Been in just over a year now and number track days on it. Still feels very smooth in and out of gear.

I cannot thank you enough for the rebuild. It's been nice not having to worry about it now.

cdoxp800 · 04-24-2018, 09:17 PM

Quote:

Originally Posted by Rusty

Question. Is our manual tranny the same as in the 350Z?

From what I can tell they are the same inside. Both have the same gear ratios.

Gear ratio
1st 3.794
2nd 2.324
3rd 1.624
4th 1.271
5th 1.000
6th 0.794

Chrisc3 · 08-03-2019, 07:48 PM

I lost 5th and 6th. I need a rebuild. Any updates

scope22 · 08-03-2019, 11:17 PM

Seems like one person knows which are the correct syncros but they will not say

USMCram · 10-06-2019, 09:21 PM

Bumping this guy up. Have 5th gear grinds. Would like to get some more info.

Spooler · 10-06-2019, 09:34 PM

It would be nice to know if he has a forged (billet) input shaft for us boosted folks who break them.

Wezzley · 04-17-2020, 11:01 AM

Bumping this up.

I have my old transmission apart, lost 5th and 6th. Found the shift fork rod was completely sheared. A few gears were grinding prior. I put a brand new trans from Nissan in however I would like to build my old transmission for high power and reliability as this car is becoming a dedicated competitive drift car.

I have found ZERO information on where to get any upgraded internals available after reading through this entire thread. Some guy from Carver Motorsport or something like that?

10-23-2017, 12:22 PM	#94 (permalink)
kaliwraith Base Member Join Date: Jun 2016 Location: Austin, TX Posts: 34 Drives: 2012 370z Sport Rep Power: 9	I've been getting grinding in 2nd gear and crunchy shifting in 3rd. Do you think a rebuild is a good option for me? This is my DD. I changed my trans oil and differential oil this weekend to MT-85, still grinding, requires double clutch to shift smoothly. Last edited by kaliwraith; 10-23-2017 at 03:29 PM. Reason: added bit about trans oil

10-24-2017, 02:04 PM	#97 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Question. Is our manual tranny the same as in the 350Z? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-24-2017, 02:13 PM	#98 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Doesn't look like it. The 350Z MT part numbers start with 32010*** The 370Z MT part numbers start with 320B0*** __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

08-03-2019, 07:48 PM	#101 (permalink)
Chrisc3 Base Member Join Date: Nov 2014 Location: texas Posts: 123 Drives: 2009 370z white Rep Power: 10	I lost 5th and 6th. I need a rebuild. Any updates Last edited by Chrisc3; 08-03-2019 at 08:02 PM.

08-03-2019, 11:17 PM	#102 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Seems like one person knows which are the correct syncros but they will not say Chrisc3 likes this.

07-31-2017, 10:12 AM	#92 (permalink)
Ccarver Base Member Join Date: Dec 2016 Location: Prairieville, LA Posts: 15 Drives: 93 240sx Rep Power: 8	Cdoxp800, what is the latest update on the unit in your car. Sent from my iPhone using Tapatalk

10-24-2017, 11:38 AM	#95 (permalink)
R3drckt09 Base Member Join Date: Jul 2013 Location: Texas Posts: 145 Drives: 09 Nissan 370Z Base Rep Power: 12	So I read this whole thread but can't find where I can get a hold of these upgraded synchros? I've had my car for 4 years (been boosted for the last 3 years) and it's always scratched if I shift into 5th or 6th too quickly. I've just been living with it but I'd love to find a solution!

10-06-2019, 09:21 PM	#103 (permalink)
USMCram Track Member Join Date: Oct 2011 Location: Texas Posts: 522 Drives: 2019 718 Cayman Rep Power: 3370	Bumping this guy up. Have 5th gear grinds. Would like to get some more info.

10-06-2019, 09:34 PM	#104 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	It would be nice to know if he has a forged (billet) input shaft for us boosted folks who break them. Rusty likes this.

04-17-2020, 11:01 AM	#105 (permalink)
Wezzley Base Member Join Date: Dec 2019 Location: Anaheim, CA Posts: 5 Drives: 10 Nissan 370Z Drift Rep Power: 5	Bumping this up. I have my old transmission apart, lost 5th and 6th. Found the shift fork rod was completely sheared. A few gears were grinding prior. I put a brand new trans from Nissan in however I would like to build my old transmission for high power and reliability as this car is becoming a dedicated competitive drift car. I have found ZERO information on where to get any upgraded internals available after reading through this entire thread. Some guy from Carver Motorsport or something like that? Chrisc3 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Automatic or Manual transmission?	alqubaisi	Nissan 370Z General Discussions	17	11-24-2010 09:31 AM
Manual Transmission	MCKempt	New 370Z Owner	9	10-05-2010 09:15 PM
Manual Transmission	tdd1986	Nissan 370Z General Discussions	16	08-27-2010 11:11 AM
How is the manual transmission w/o Rev Match?	Znewb	Nissan 370Z General Discussions	20	09-10-2009 09:22 PM