04-13-2012, 09:10 PM
|
#1 (permalink)
|
|
Track Member
Join Date: Mar 2012
Location: Pittsburgh, PA
Posts: 802
Drives: 2010 370Z Nismo
Rep Power: 15
|
Quote:
Originally Posted by roy'sz
look where the oil filter is on the bottom of your car. You need to jack it up and follow the outline of the plastic shroud plate. The back 4 bolts that are 10mm you need to take off and fold the plastic back. you will see the oil filter and the two oil hoses. I am 99% sure you don't have the thermostatic plate because of it being the nissan kit. The reason why I know this is becase the hoses are typically wrapped up on top of the oil cooler like the third picture you took, that and the hoses nissan uses are red and blue. No extra steps in doing a oil change, but if you want to swap over then use z1
|
So I won't need to drain this separately to get all the used oil out? And would the damper that was removed not fit with the cooler there or what?
|
|
|
Similar Threads
Hybrid Mode
