JUN exhaust cam shaft finally arrived

Navyboy916 · 11-02-2012, 09:37 PM

Yea it's a little more then that but if that's what they said then good. Again it's not a simple job pulling the intake side off. Also, swapping the valve train take a lot of time and then finding the correct shims is actually the longest part of the process cause there is no standard size every car is different. For each one they will have put the shim in measure and if not correct try another so on and so on.

ZKraken22 · 11-05-2012, 12:37 PM

did GTM give you a time frame of when they would be done with your heads?

Navyboy916 · 11-05-2012, 02:58 PM

Yes they said it will take about a week and half and then they will be shipping them back to me. I am also having the moderate port and polish job added to the heads now and upgrading the valves to.

BlkNismo · 11-06-2012, 09:19 AM

Quote:

Originally Posted by Navyboy916

Yes they said it will take about a week and half and then they will be shipping them back to me. I am also having the moderate port and polish job added to the heads now and upgrading the valves to.

pretty much GTM's stage 2 head package?

Navyboy916 · 11-06-2012, 12:04 PM

Yes

scth83 · 11-06-2012, 06:13 PM

Did you get a reply from them in the past 2 weeks? A few email sent but no reply from them.

Sent from my iPad using Tapatalk HD

Nu2Nizmo's · 11-06-2012, 10:15 PM

And the anticipation continues......

Navyboy916 · 11-06-2012, 11:38 PM

Your telling me about the anticipation. I am currently gathering all the extra parts I need to get before the engine is put back together and in the car. I just ordered the urethane motor mounts from z1 motorsports to flex with the flexing of the motor when the throttle is quickly depressed. I have a lot of extra goodies going on the car when the motor is put back together.

Nu2Nizmo's · 11-07-2012, 09:09 AM

Quote:

Originally Posted by Navyboy916

Your telling me about the anticipation. I am currently gathering all the extra parts I need to get before the engine is put back together and in the car. I just ordered the urethane motor mounts from z1 motorsports to flex with the flexing of the motor when the throttle is quickly depressed. I have a lot of extra goodies going on the car when the motor is put back together.

Awesome! Can't wait to see the results.
Btw- You must be rich cuz they're is nooooo way you can be doing all this with a Navy salary... Lol

Navyboy916 · 11-07-2012, 02:46 PM

Lol actually I am doing all this on a navy salary.

VQStryker · 11-07-2012, 11:23 PM

Quote:

Originally Posted by Navyboy916

Lol actually I am doing all this on a navy salary.

Your location is guam? How do you plan on tuning the car? Looking forward to this good luck

Navyboy916 · 11-08-2012, 12:04 AM

I have to tune the car through e tunes with uprev

edub370 · 11-08-2012, 09:18 AM

Quote:

Originally Posted by VQStryker

Your location is guam? How do you plan on tuning the car? Looking forward to this good luck

u know you can street tune the same way u can dyno tune right?

SS_Firehawk · 11-08-2012, 12:44 PM

Is there a drag strip in Guam? Power can be estimated with trap speed.

VQStryker · 11-08-2012, 08:18 PM

Quote:

Originally Posted by Navyboy916

I have to tune the car through e tunes with uprev

sounds good

Quote:

Originally Posted by edub370

u know you can street tune the same way u can dyno tune right?

yes

11-05-2012, 12:37 PM	#317 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 16	did GTM give you a time frame of when they would be done with your heads? __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

11-06-2012, 10:15 PM	#322 (permalink)
Nu2Nizmo's Base Member Join Date: Oct 2012 Location: Port Orchard Posts: 99 Drives: 09' Nismo 370Z Rep Power: 13	And the anticipation continues...... __________________ 09' PW Z34 NISMO #0432Current: F5 SR Intakes - Berk HFC - H&R 15mm Spacers - 265/305 BS RE-11's - Swift Spec R's Next mods: Oil cooler - Big Brake kit - Osiris w/dyno

11-06-2012, 11:38 PM	#323 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Your telling me about the anticipation. I am currently gathering all the extra parts I need to get before the engine is put back together and in the car. I just ordered the urethane motor mounts from z1 motorsports to flex with the flexing of the motor when the throttle is quickly depressed. I have a lot of extra goodies going on the car when the motor is put back together. 370ZNISMO#704 likes this.

11-07-2012, 02:46 PM	#325 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Lol actually I am doing all this on a navy salary. MyKindaGuise likes this.

11-08-2012, 12:44 PM	#329 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Is there a drag strip in Guam? Power can be estimated with trap speed. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

11-02-2012, 09:37 PM	#316 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Yea it's a little more then that but if that's what they said then good. Again it's not a simple job pulling the intake side off. Also, swapping the valve train take a lot of time and then finding the correct shims is actually the longest part of the process cause there is no standard size every car is different. For each one they will have put the shim in measure and if not correct try another so on and so on.

11-05-2012, 02:58 PM	#318 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Yes they said it will take about a week and half and then they will be shipping them back to me. I am also having the moderate port and polish job added to the heads now and upgrading the valves to.

11-06-2012, 12:04 PM	#320 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Yes

11-06-2012, 06:13 PM	#321 (permalink)
scth83 Base Member Join Date: Mar 2010 Location: HK Posts: 18 Drives: 10 Nissan 370Z PG M6 Rep Power: 15	Did you get a reply from them in the past 2 weeks? A few email sent but no reply from them. Sent from my iPad using Tapatalk HD

11-08-2012, 12:04 AM	#327 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	I have to tune the car through e tunes with uprev

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top Secret intake finally arrived	zuperman 370	Intake/Exhaust	43	06-11-2012 01:31 PM
finally amuse stti extra exhaust arrived + lots of pics	zuperman 370	Intake/Exhaust	22	03-16-2011 01:25 AM
Finally Arrived	gregp	Member's 370Z Gallery	7	08-25-2010 10:30 PM
The day finally arrived!!!	TooFaded	New 370Z Owner	9	08-09-2010 08:29 AM
Jekels Z finally arrived!	jekel	Member's 370Z Gallery	15	08-24-2009 07:32 AM