Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   JUN exhaust cam shaft finally arrived (http://www.the370z.com/engine-drivetrain/52968-jun-exhaust-cam-shaft-finally-arrived.html)

DEpointfive0 01-10-2013 11:24 AM

Quote:

Originally Posted by The Dimer (Post 2103253)
I still don't understand why so many people are all over these guys' backs. It's not like they're a company trying to sell you a product. They don't have to prove anything, they don't owe anyone anything. They're just a couple guys who decided to mod their cars and wanted to share their plans with the community.

I really don't care, just busting balls...


I'm going to look into how hard the install is... 20+hours as many have quoted it a little... Moronic for the gains it supposedly provides...
But at the same time... When you're maxed out, you have no choice



Who was the other member the DID install them?

The Dimer 01-10-2013 11:58 AM

CTD-Germany is working on a car with them installed, but they have quite a bit of extra work done too.

http://www.the370z.com/engine-drivet...-jun-cams.html

Navyboy916 01-24-2013 04:51 AM

It a lot more complex then just dropping the cams in. Don't be fooled from anyone telling you it's an easy swap.

ZKraken22 01-24-2013 03:31 PM

Any updates?

Navyboy916 01-24-2013 03:32 PM

Hell yes man check out my thread that's where I am posting everything. You will like what you see I think

John's sweet NA build

Shorty's6 07-01-2013 12:06 AM

Will these fit a g37?

Navyboy916 07-01-2013 12:28 AM

Yes they will fit its the same engine

Spikuh 07-01-2013 09:29 AM

Quote:

Originally Posted by Navyboy916 (Post 2128533)
Hell yes man check out my thread that's where I am posting everything. You will like what you see I think

John's sweet NA build

Here is the link for people to see. :D

http://www.the370z.com/members-370z-...-na-build.html

Silo 07-01-2013 10:05 AM

Did we ever see any evidence that these cams did anything good?

Navyboy916 07-01-2013 03:18 PM

Yes I did. The cars screams to redline now and has a lot of power at top end. I can't dyno the car due to Guam not having a dyno. I am leaving to Hawaii soon and they have a couple of dynos and uprev tuners so I will be getting it done there. I know the car makes a lot more power then it did when it was in the stock format. I have the 272 duration cams and now they have larger cams so they will make even more power.

Silo 07-01-2013 03:41 PM

Looking forward to see some dyno comparisson.

Navyboy916 07-01-2013 03:51 PM

I am to I can't wait to get the numbers.

GEMu 10-26-2013 02:05 PM

Many Z34 here in BKK did the JUN cam, one of a guy I know installed the cam along with
an IMPUL throttle body and yield around 350whp on Dynojet so it hard to say where did the extra 20-30whp came from.
That Z got a custom stright pipe from headers, F con Vpro3.3 dyno tuned by one of the most famous race car tuner in Thailand, racing suction with HKS filter and IMPUL throttle bodies.
350whp on dyno jet in tropical climate like BKK is not too bad IMO, but the owner said the installation was PITA.

Jordo! 10-26-2013 03:32 PM

Quote:

Originally Posted by GEMu (Post 2542404)
Many Z34 here in BKK did the JUN cam, one of a guy I know installed the cam along with
an IMPUL throttle body and yield around 350whp on Dynojet so it hard to say where did the extra 20-30whp came from.
That Z got a custom stright pipe from headers, F con Vpro3.3 dyno tuned by one of the most famous race car tuner in Thailand, racing suction with HKS filter and IMPUL throttle bodies.
350whp on dyno jet in tropical climate like BKK is not too bad IMO, but the owner said the installation was PITA.

That's actually quite good -- even with headers and a tune. Do you have a link to the dynos, by any chance?

SPOHN 10-26-2013 03:34 PM

This has to be the most BS mod period. Not the cams put the point that a couple of guys have installed or attempted to with no proven results. Swear I'm about to do it to get something proven for once.


All times are GMT -5. The time now is 06:18 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2