JUN exhaust cam shaft finally arrived

edub370 · 10-05-2012, 02:48 PM

not necessarily true. hook up a wideband o2 sensor to read AFR's and u can street tune it just fine

Navyboy916 · 10-16-2012, 07:06 PM

Ok so here the update. Friday I will be going to take pics of the engine when it's open. I had to wait for some seal to come in cause the dealership had none for when they put the engine covers back on. They just came in. The can install will be finished by beginning of next week. The Nissan manual calls for two to three full days but here on Guam I have to plan for longer. That's just the island life here lol. I am getting other things done to the car as well at the same time. Sorry for the long delay. That's what happens when u live on an island in the middle of bum **** nowhere lol. Hope u guys are still interested.

Jordo! · 10-17-2012, 07:14 PM

Quote:

Originally Posted by Navyboy916

Ok so here the update. Friday I will be going to take pics of the engine when it's open. I had to wait for some seal to come in cause the dealership had none for when they put the engine covers back on. They just came in. The can install will be finished by beginning of next week. The Nissan manual calls for two to three full days but here on Guam I have to plan for longer. That's just the island life here lol. I am getting other things done to the car as well at the same time. Sorry for the long delay. That's what happens when u live on an island in the middle of bum **** nowhere lol. Hope u guys are still interested.

Wow -- good luck!

Do you have a baseline to compare it to?

Navyboy916 · 10-17-2012, 08:26 PM

Unfortunately we don't have a dyno here on Guam. I don't have actual numbers but I will show video to help people decide if they want to get the cams. Sorry that's the best I can do.

370Z Purist · 10-17-2012, 08:42 PM

Quote:

Originally Posted by Navyboy916

Unfortunately we don't have a dyno here on Guam. I don't have actual numbers but I will show video to help people decide if they want to get the cams. Sorry that's the best I can do.

I find it odd that the only person who does cams does it OUTSIDE the US, in one of the only places without a dyno.

No offense, but I just find it weird.

Navyboy916 · 10-17-2012, 09:15 PM

Obviously u have never been to Guam. It's an island in the middle of nowhere. I have a couple of other guys with 370z on here they can chime in and will say the same thing. Again sorry this island is pretty primitive still.

370Z Purist · 10-17-2012, 09:54 PM

No, I have not been to Guam, but that's exactly what I just said.

The only person to do cams, in the middle of nowhere.

DarkJak · 10-17-2012, 10:51 PM

Of course it WOULD work that way, but hopefully his results will be good, and this may convince people in the US to get it.

Jordo! · 10-18-2012, 01:07 AM

Quote:

Originally Posted by Navyboy916

Unfortunately we don't have a dyno here on Guam. I don't have actual numbers but I will show video to help people decide if they want to get the cams. Sorry that's the best I can do.

But... how will we (or you?) know if it made a worthwhile difference?

Can you at least datalog a 0-60 or 1/8th mile (or ideally a 1/4 mile) run somewhere to compare and contrast before and after cams?

Actually, given known weight and some values for speed, we can probably find formulas to roughly estimate whp before and after.

Not as good as a dyno, but far better than nothing.

Navyboy916 · 10-18-2012, 02:04 AM

I hope this will convince someone in the states to buy these cams and get them dynoed.

GarageLine.com · 10-18-2012, 10:01 AM

Quote:

Originally Posted by Navyboy916

I hope this will convince someone in the states to buy these cams and get them dynoed.

I have a set on the way to to me. It probably will be late November by the time I get them though. But we will have dyno numbers soon.

370Z Purist · 10-18-2012, 03:10 PM

Quote:

Originally Posted by garageline.com

i have a set on the way to to me. It probably will be late november by the time i get them though. But we will have dyno numbers soon.

yes.

edub370 · 10-18-2012, 03:28 PM

Quote:

Originally Posted by GarageLine.com

I have a set on the way to to me. It probably will be late November by the time I get them though. But we will have dyno numbers soon.

Thank GOD!!!!!!!!!

Z eliminator · 10-18-2012, 03:45 PM

The Z has a set of june cams.
not sure what moter to put them in,
good bet that GTM will install them in my built moter.
not till middle of winter
20 thou over bore 10.1 comp, all the best parts. with GTM stage 3 SC.
15 lbs boost ?

The Dimer · 10-18-2012, 06:07 PM

Quote:

Originally Posted by Z eliminator

The Z has a set of june cams.
not sure what moter to put them in,
good bet that GTM will install them in my built moter.
not till middle of winter
20 thou over bore 10.1 comp, all the best parts. with GTM stage 3 SC.
15 lbs boost ?

Stage 3, you say?

10-05-2012, 02:48 PM	#256 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	not necessarily true. hook up a wideband o2 sensor to read AFR's and u can street tune it just fine __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

10-16-2012, 07:06 PM	#257 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Ok so here the update. Friday I will be going to take pics of the engine when it's open. I had to wait for some seal to come in cause the dealership had none for when they put the engine covers back on. They just came in. The can install will be finished by beginning of next week. The Nissan manual calls for two to three full days but here on Guam I have to plan for longer. That's just the island life here lol. I am getting other things done to the car as well at the same time. Sorry for the long delay. That's what happens when u live on an island in the middle of bum **** nowhere lol. Hope u guys are still interested. 03Z33 likes this.

10-17-2012, 09:54 PM	#262 (permalink)
370Z Purist A True Z Fanatic Join Date: Jun 2009 Location: Zion, Illinois Posts: 1,873 Drives: '09 370Z-T BS M6 Rep Power: 19	No, I have not been to Guam, but that's exactly what I just said. The only person to do cams, in the middle of nowhere. __________________ -Phil "Since one of my brake light bulbs just went out, the forum told me that my piston rings are about to blow."

10-18-2012, 03:45 PM	#269 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	The Z has a set of june cams. not sure what moter to put them in, good bet that GTM will install them in my built moter. not till middle of winter 20 thou over bore 10.1 comp, all the best parts. with GTM stage 3 SC. 15 lbs boost ? __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top Secret intake finally arrived	zuperman 370	Intake/Exhaust	43	06-11-2012 01:31 PM
finally amuse stti extra exhaust arrived + lots of pics	zuperman 370	Intake/Exhaust	22	03-16-2011 01:25 AM
Finally Arrived	gregp	Member's 370Z Gallery	7	08-25-2010 10:30 PM
The day finally arrived!!!	TooFaded	New 370Z Owner	9	08-09-2010 08:29 AM
Jekels Z finally arrived!	jekel	Member's 370Z Gallery	15	08-24-2009 07:32 AM

10-17-2012, 08:26 PM	#259 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Unfortunately we don't have a dyno here on Guam. I don't have actual numbers but I will show video to help people decide if they want to get the cams. Sorry that's the best I can do.

10-17-2012, 09:15 PM	#261 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	Obviously u have never been to Guam. It's an island in the middle of nowhere. I have a couple of other guys with 370z on here they can chime in and will say the same thing. Again sorry this island is pretty primitive still.

10-17-2012, 10:51 PM	#263 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	Of course it WOULD work that way, but hopefully his results will be good, and this may convince people in the US to get it.

10-18-2012, 02:04 AM	#265 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	I hope this will convince someone in the states to buy these cams and get them dynoed.