Oil cooler fan, thermo and shroud, good oil temps now

Winters

I have a 25 row oil cooler - which worked fine if the car was moving at a decent speed. However, I live in Los Angeles, so sadly most of my driving is in traffic (LA traffic is as bad as you've heard), and often in warm weather. My oil temps were often in the 220-240 range, and sometimes higher.

The solution was a 9 inch Spal pusher fan installed in front of the oil cooler with a custom fan shroud. Seb at Specialty Z fabricated the shroud and did a super clean install. The shroud is 9" and tapers to about the 7.5" height of the oil cooler. The shroud installs over the damper.

The fan is activated by a thermostat threaded into the oil pan with a custom bung. It turns on at 195 degrees. Oil pan customization was also done by Specialty Z.

Temps are now 200, 210 degrees at the most. When stopped I've seen the temp creep down when stopped at a light.

Attached Images

Pusher fan.jpg (112.3 KB, 101 views)

__________________
2011 Magnetic Black NISMO: Kenwood DDX418, Polk Audio, Dynamat, Z1 25 row oil cooler, 4.08 differential, Stillen G3's