JUN High Lift Exhaust Camshafts has be released

zuperman 370 · 03-05-2012, 04:59 PM

If I run there whole package will it be harder to install the parts? And will it be hard to replace the vvel actutator? Does it matter if the cars ecu is US European Japan or gcc spec?

zuperman 370 · 03-05-2012, 05:00 PM

I don't think it needs a tune as they said no need for any kind of tune

NYBladeZ · 03-05-2012, 05:08 PM

Honestly bro, if you take the plunge and keep us in the loop during the install, we'll all try to help you out with the forum's collective knowledge.

zuperman 370 · 03-05-2012, 05:15 PM

I'll take the bullet for my fellow forum friends and go with it will be contacting 370ztune because I see that they sell them on their site I just hope that jun provides detailed install manual in English lool

zuperman 370 · 03-05-2012, 05:16 PM

Btw no one told me where I can get the springs from?

NYBladeZ · 03-05-2012, 05:19 PM

Jun develops their own springs but they don't have listed for the vq37 so either springs are included with the cams or they retain stock springs.

Red__Zed · 03-05-2012, 05:20 PM

Quote:

Originally Posted by zuperman 370

Btw no one told me where I can get the springs from?

Jun. they are listed with the package

Red__Zed · 03-05-2012, 05:21 PM

1. EX cams *jpy 48,000
2. F ccover O-ring *2pc *jpy 856
3. F cover o-ring *2pcs *jpy 856
4. F cover o-ring *1pcs *jpy 440
5. F cover o-ring *1pc *jpy 428
6. Water pump o-ring *2pc *jpy 1108
7. Oil pan o-ring *2pc *jpy 856
8. valve lifters *12pcs *jpy 44,892
9. Roker cover packin *2pc *jpy 3350
10. Roker cover packin 2pcs *jpy 3350
11. Gasket solenoid *2pc *jpy 1008
12. VVEL controll actuator assy *2pcs *jpy 110,880
****have to replace manual but we use them again
13. Clutch release bearing *jpy 13,230
14. Seal material *jpy 3150
15. Transfer charge to Burunei *jpy 25,000
16. Bank fee *jpy 3,000
Total *jpy 260,404

sixpax · 03-05-2012, 05:52 PM

Quote:

Originally Posted by zuperman 370

I'll take the bullet for my fellow forum friends and go with it will be contacting 370ztune because I see that they sell them on their site I just hope that jun provides detailed install manual in English lool

I admire your spirit of adventure !

ValidusVentus · 03-05-2012, 08:26 PM

subd

roplusbee · 03-05-2012, 09:23 PM

So that works out to about 3200 bux. Interesting!

370z_Sniper · 03-06-2012, 12:02 AM

Quote:

Originally Posted by zuperman 370

If I run there whole package will it be harder to install the parts? And will it be hard to replace the vvel actutator? Does it matter if the cars ecu is US European Japan or gcc spec?

I face one problem when my ecu was damaged, i discover that the US ecu is quite different than the gcc spec. so i ordered the ecu direct from Japan.

370z_Sniper · 03-06-2012, 12:14 AM

I ask JUN company if i can run this cams on a stock engine?

The answer was:
stock ex manifold/ stock catalystic convertor / sport muffler/ high
comp piston / stengthen conrods/
The power was 368ps.

I would like to know, is the high comp piston are stock or no?

and what is the stengthen conrods?

Zrider79 · 03-06-2012, 01:05 AM

Sub'd!!!

zuperman 370 · 03-06-2012, 03:55 AM

Quote:

Originally Posted by 370z_Sniper

I ask JUN company if i can run this cams on a stock engine?

The answer was:
stock ex manifold/ stock catalystic convertor / sport muffler/ high
comp piston / stengthen conrods/
The power was 368ps.

I would like to know, is the high comp piston are stock or no?

and what is the stengthen conrods?

I would like to know that as well, and can i get the springs alone from jun,come on guys the faster i get this info the faster ill do this mod, im contacting jun but not getting much help from them there replies are breife and dont offer much help, please the mechanic guys chime in

03-05-2012, 05:08 PM	#78 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	Honestly bro, if you take the plunge and keep us in the loop during the install, we'll all try to help you out with the forum's collective knowledge. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

03-05-2012, 05:19 PM	#81 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	Jun develops their own springs but they don't have listed for the vq37 so either springs are included with the cams or they retain stock springs. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

03-05-2012, 08:26 PM	#85 (permalink)
ValidusVentus Enthusiast Member Join Date: Jun 2011 Location: Washington State Posts: 400 Drives: #18 Z34 Rep Power: 23	subd __________________ Mods: Dedicated caged track car, lots of things. \|\|\| Valkyrie Autosport \|\|\|

03-05-2012, 09:23 PM	#86 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	So that works out to about 3200 bux. Interesting! __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just Released! Power Craft Hybrid Exhaust	370Ztune	Intake/Exhaust	26	12-28-2015 12:52 PM
@@Tanabe Medalion Touring exhaust and Y-Pipe Released! Sound Clip Inside!@@	corner3garage	Exhaust/Intake	398	02-19-2015 06:43 PM
MCR Exhaust Pricing Released	370Ztune	370Ztune	3	03-24-2010 07:11 PM
Central 20 ECU Update and Exhaust manifold released	BanningZ	Engine & Drivetrain	12	07-13-2009 12:51 PM
Amuse - Full Exhaust Lineup Released - Titanium	GT Motoring	Intake/Exhaust	1	05-13-2009 10:51 PM

03-05-2012, 04:59 PM	#76 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	If I run there whole package will it be harder to install the parts? And will it be hard to replace the vvel actutator? Does it matter if the cars ecu is US European Japan or gcc spec?

03-05-2012, 05:00 PM	#77 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	I don't think it needs a tune as they said no need for any kind of tune

03-05-2012, 05:15 PM	#79 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	I'll take the bullet for my fellow forum friends and go with it will be contacting 370ztune because I see that they sell them on their site I just hope that jun provides detailed install manual in English lool

03-05-2012, 05:16 PM	#80 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 16	Btw no one told me where I can get the springs from?

03-05-2012, 05:21 PM	#83 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	1. EX cams jpy 48,000 2. F ccover O-ring 2pc jpy 856 3. F cover o-ring 2pcs jpy 856 4. F cover o-ring 1pcs jpy 440 5. F cover o-ring 1pc jpy 428 6. Water pump o-ring 2pc jpy 1108 7. Oil pan o-ring 2pc jpy 856 8. valve lifters 12pcs jpy 44,892 9. Roker cover packin 2pc jpy 3350 10. Roker cover packin 2pcs jpy 3350 11. Gasket solenoid 2pc jpy 1008 12. VVEL controll actuator assy 2pcs jpy 110,880 ***have to replace manual but we use them again 13. Clutch release bearing jpy 13,230 14. Seal material jpy 3150 15. Transfer charge to Burunei jpy 25,000 16. Bank fee jpy 3,000 Total jpy 260,404

03-06-2012, 12:14 AM	#88 (permalink)
370z_Sniper Base Member Join Date: Mar 2011 Location: UAE Posts: 25 Drives: 2010-370Z-White-M Rep Power: 14	I ask JUN company if i can run this cams on a stock engine? The answer was: stock ex manifold/ stock catalystic convertor / sport muffler/ high comp piston / stengthen conrods/ The power was 368ps. I would like to know, is the high comp piston are stock or no? and what is the stengthen conrods?

03-06-2012, 01:05 AM	#89 (permalink)
Zrider79 Track Member Join Date: Jan 2011 Location: Pensacola florida Posts: 679 Drives: 2010 Rep Power: 15	Sub'd!!!