Pulleys: Unorthodox VS Stillen

darionlear · 02-16-2012, 08:47 AM

Okay, I'm on the cliff ready to order. Not sure if I want unorthodox or stillen. I want to do both crank and accessory pulleys and keep ping ponging back and forth between the two brands...

Anyone wanna give any insight?

Who here has, and what did you like, experience and benefit from your setup?

Flushnismo · 02-16-2012, 09:00 AM

I'd also like to know.. Subscribed.

370ZilverZ · 02-16-2012, 09:11 AM

I'm running NST. No problems and simple install. NST is based out of Houston. Pics and video in my journal.

Unique_Z · 02-16-2012, 09:25 AM

I've bought Stillen lightweight ones. I've spent a good amount of research and found out that stillen outputs slightly more power than NST's and Unorthodox. but you're good with either one

pty370z · 02-16-2012, 10:21 AM

Quote:

Originally Posted by darionlear

Okay, I'm on the cliff ready to order. Not sure if I want unorthodox or stillen. I want to do both crank and accessory pulleys and keep ping ponging back and forth between the two brands...

Anyone wanna give any insight?

Who here has, and what did you like, experience and benefit from your setup?

I went through that debate back and forth a million times..

Stillen only has the crank pulley, Unorthodox has both..

I my case I purchased the crank pulley first and later on I purchased the alternator pulley..

I went with Stillen for crank and Unorthodox for alternator.. If I had been in a position to purchase both at the same time I would've gone with Unorthodox..

Are you going to buy just lightweight, standard size or underdrive?

darionlear · 02-16-2012, 11:33 AM

Quote:

Originally Posted by pty370z

I went through that debate back and forth a million times..

Stillen only has the crank pulley, Unorthodox has both..

I my case I purchased the crank pulley first and later on I purchased the alternator pulley..

I went with Stillen for crank and Unorthodox for alternator.. If I had been in a position to purchase both at the same time I would've gone with Unorthodox..

Are you going to buy just lightweight, standard size or underdrive?

I want under drive and light weight.

I've completely opened up my exhaust from front to end and done my UpRev. My next mods are
Pulleys
Short shifter
And suspension

ydg27g · 02-16-2012, 01:39 PM

My unorthodox should be in today, i'll let you know what i think when i get it installed.

darionlear · 02-16-2012, 05:23 PM

Quote:

Originally Posted by ydg27g

My unorthodox should be in today, i'll let you know what i think when i get it installed.

You did both? Mind sharing how much ? :-)

kcquinn49 · 03-03-2012, 12:21 PM

I'm curious too. Stillen is slightly more? Is that becuase it is 20% underdrive?

For those using Unorthodox, and getting the accessory pulley, how much of an increase does it bring?

Of the three, for crank pulley, which is the lightest?

02-16-2012, 08:47 AM	#1 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 14	Pulleys: Unorthodox VS Stillen Okay, I'm on the cliff ready to order. Not sure if I want unorthodox or stillen. I want to do both crank and accessory pulleys and keep ping ponging back and forth between the two brands... Anyone wanna give any insight? Who here has, and what did you like, experience and benefit from your setup?

02-16-2012, 09:00 AM	#2 (permalink)
Flushnismo A True Z Fanatic Join Date: Dec 2010 Location: Amarillo, TX Posts: 1,041 Drives: 2010 Boosted 40th Rep Power: 17	I'd also like to know.. Subscribed. __________________ AeroJacket l BC Racing l B&M l K&N l EVO-R l TWM Performance l Tanabe l AAM l Drop Engineering l Zenclosure

02-16-2012, 09:11 AM	#3 (permalink)
370ZilverZ A True Z Fanatic Join Date: Dec 2011 Location: DFW, TX Age: 67 Posts: 2,321 Drives: '11 BMW Z4 Rep Power: 19	I'm running NST. No problems and simple install. NST is based out of Houston. Pics and video in my journal. __________________ 370ZilverZ Journal BMW Z4

02-16-2012, 09:25 AM	#4 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	I've bought Stillen lightweight ones. I've spent a good amount of research and found out that stillen outputs slightly more power than NST's and Unorthodox. but you're good with either one __________________ My Z Build UniqueZ Last edited by Unique_Z; 02-16-2012 at 11:11 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Light weight Pulleys for my Z !! YES OR NO?????	370zjames	Engine & Drivetrain	14	01-19-2012 07:17 PM
stillen pulleys	redroadster10	Engine & Drivetrain	5	05-10-2011 08:20 AM
UD pulleys NST or Stillen	snapping	Engine & Drivetrain	1	05-25-2010 07:15 PM
Unorthodox or Stillen Crank Pulley?	pty370z	Engine & Drivetrain	23	03-31-2010 07:49 PM
NST vs Stillen pulleys--which one?	earwicker7	Intake/Exhaust	12	12-11-2009 11:22 AM

02-16-2012, 01:39 PM	#7 (permalink)
ydg27g Base Member Join Date: Jan 2012 Location: Idaho Posts: 33 Drives: 2009 370z Rep Power: 13	My unorthodox should be in today, i'll let you know what i think when i get it installed.

03-03-2012, 12:21 PM	#9 (permalink)
kcquinn49 Base Member Join Date: Dec 2011 Location: Indiana Posts: 86 Drives: 2011 370Z Coupe Rep Power: 250	I'm curious too. Stillen is slightly more? Is that becuase it is 20% underdrive? For those using Unorthodox, and getting the accessory pulley, how much of an increase does it bring? Of the three, for crank pulley, which is the lightest?