How much do vq37vhr heads sell for normally?

dirTy_shoeZ · 01-02-2012, 09:47 PM

I've got a long block that I wanted to make a table out of and don't need the heads, I didn't wanna take this straight to a for sale section so they could close it so I thought I'd see if someone had a general idea of what they go for. The heads are perfectly fine just need to be taken to a machine shop to resurface but I'm even considering doing that real quick so there's no issues

FL 4Motion · 01-02-2012, 11:13 PM

$250?? maybe.

08 INFINITI G37 R. CYLINDER HEAD VQ37VHR | eBay

jezeka777 · 01-09-2012, 08:42 PM

250 sounds too cheap

CSA0890 · 01-10-2012, 07:16 PM

I would think somewhere around 600 a side. Thats what they cost on my cobalt ss which was also dohc

1slow370 · 01-16-2012, 01:03 AM

i bought a set with lim and full timing set for 700.

BGTV8 · 01-16-2012, 01:24 AM

Because of the VVEL, the heads are not enduser serviceable - they are return to the factory for re-assembl

So, IMHO they are most useful as boat anchors and will attract a similar price. Small boat anchors on EBAY are <$100 - so I'd be asking $200 for the pair.

1slow370 · 01-16-2012, 01:47 AM

thats bs only really non servicable parts are are the vvel ladder assembly itself. the heads can be disassembled the valves can be replaced. the entire exhaust side is serviceable. it takes special steps compared to a normal dohc engine but they are serviceable dont try to screw the guy. 4-700 for the set depending on condition is fair. not to mention hr cams can be fitted with some work and then you have high-flow overbore hr heads.

01-02-2012, 09:47 PM	#1 (permalink)
dirTy_shoeZ Track Member Join Date: Jul 2010 Location: san antonio, tx Posts: 778 Drives: 40th ANN TT Rep Power: 16	How much do vq37vhr heads sell for normally? I've got a long block that I wanted to make a table out of and don't need the heads, I didn't wanna take this straight to a for sale section so they could close it so I thought I'd see if someone had a general idea of what they go for. The heads are perfectly fine just need to be taken to a machine shop to resurface but I'm even considering doing that real quick so there's no issues

01-16-2012, 01:03 AM	#5 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	i bought a set with lim and full timing set for 700. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-16-2012, 01:47 AM	#7 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	thats bs only really non servicable parts are are the vvel ladder assembly itself. the heads can be disassembled the valves can be replaced. the entire exhaust side is serviceable. it takes special steps compared to a normal dohc engine but they are serviceable dont try to screw the guy. 4-700 for the set depending on condition is fair. not to mention hr cams can be fitted with some work and then you have high-flow overbore hr heads. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heads-Up on Exhaust	Roadster4Us	Mid-Atlantic Region	16	02-13-2012 11:50 PM
Heads up Display for Z	dennisc5000	Nissan 370Z General Discussions	22	07-05-2010 11:48 PM
Do the Rays SELL SELL SELL??	TreyUT	Nissan 370Z General Discussions	19	02-13-2010 10:03 AM
Hello Z-heads!	Z370man	New Forum Member	9	07-29-2009 09:02 PM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 11:37 AM

01-02-2012, 11:13 PM	#2 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	$250?? maybe. 08 INFINITI G37 R. CYLINDER HEAD VQ37VHR \| eBay

01-09-2012, 08:42 PM	#3 (permalink)
jezeka777 Base Member Join Date: Nov 2011 Location: westbury ny Posts: 118 Drives: 2011 370z sport Rep Power: 14	250 sounds too cheap

01-10-2012, 07:16 PM	#4 (permalink)
CSA0890 Base Member Join Date: Nov 2011 Location: Oklahoma Posts: 174 Drives: 2011 Tour/Spt 7AT Rep Power: 14	I would think somewhere around 600 a side. Thats what they cost on my cobalt ss which was also dohc

01-16-2012, 01:24 AM	#6 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	Because of the VVEL, the heads are not enduser serviceable - they are return to the factory for re-assembl So, IMHO they are most useful as boat anchors and will attract a similar price. Small boat anchors on EBAY are <$100 - so I'd be asking $200 for the pair.