Stillen Underdrive Pulley - Review/Pics/Dyno/Vid

Shunya · 08-31-2009, 08:34 AM

woooo 5whp is alot considering it's coming from a lil thing like that lol

FuszNissan · 08-31-2009, 09:27 AM

Seems a few people have taken them off already. Don't know why? Curious to hear though

bmarcinczyk14 · 08-31-2009, 02:24 PM

Quote:

Originally Posted by FuszNissan

Seems a few people have taken them off already. Don't know why? Curious to hear though

maybe because they are planning on getting a s/c and they have the underdrive pulley?

semtex · 08-31-2009, 02:27 PM

Or maybe they don't like what it does to the windshield wipers.

KIDDING! (Sorry, I couldn't resist.)

tcarretti · 08-31-2009, 02:33 PM

Semtex,

Took me a second to realize you were kidding! Good one!

Tony

Snakes709 · 08-31-2009, 10:04 PM

Quote:

Originally Posted by semtex

Or maybe they don't like what it does to the windshield wipers.

KIDDING! (Sorry, I couldn't resist.)

omg im not buying this if i messed up my wipers up....what does it do? lol...j/k. Decisions...should i buy this or G3 intake.

semtex · 09-01-2009, 08:27 AM

^ G3 if you're looking for big gains.

bmarcinczyk14 · 09-01-2009, 05:30 PM

Quote:

Originally Posted by semtex

^ G3 if you're looking for big gains.

would it make a difference if you used a heat shield to block off the filter from warm air, or is the filter far enough from the engine with the g3 where you dont need one?

wstar · 09-01-2009, 06:04 PM

Quote:

Originally Posted by bmarcinczyk14

would it make a difference if you used a heat shield to block off the filter from warm air, or is the filter far enough from the engine with the g3 where you dont need one?

There filters on the Stillen Gen 3 are way out in front of the radiator, inside the upper part of the front bumper. They're not directly getting heat from the engine bay at all out there, although they probably do pick up a little heat from the radiator and/or any oil cooler.

I have a bunch of parts in my garage to do a Modshack-style ducting job to bring outside air directly to the Gen 3 filters, we'll see if it makes any difference. I don't plan on trying to seal over the filters like he did though, I'm just going to route the tubing to dump cold air right on top of them.

ZKindaGuy · 09-01-2009, 10:57 PM

Quote:

Originally Posted by Josh@STILLEN

I'm really disappointed you couldn't find a spectacular bedspread to shoot the product photos on.. boo!

Good review and excellent pics. With as much as these cars tend to run temperatures of 220 to 230 I am surprised you chose to put on an UD pulley. Thoughts on this?

semtex · 09-02-2009, 08:29 AM

I'm not seeing the connection. What does a UD pulley have to do with oil temps?

wstar · 09-02-2009, 09:37 AM

Quote:

Originally Posted by semtex

I'm not seeing the connection. What does a UD pulley have to do with oil temps?

He might be thinking the water pump is belt driven for some reason. I can't recall any car I've owned where that was the case (including the new Z), but I suppose some car must be set up that way.

cotizi · 09-02-2009, 09:41 AM

Quote:

Originally Posted by wstar

There filters on the Stillen Gen 3 are way out in front of the radiator, inside the upper part of the front bumper. They're not directly getting heat from the engine bay at all out there, although they probably do pick up a little heat from the radiator and/or any oil cooler.

I have a bunch of parts in my garage to do a Modshack-style ducting job to bring outside air directly to the Gen 3 filters, we'll see if it makes any difference. I don't plan on trying to seal over the filters like he did though, I'm just going to route the tubing to dump cold air right on top of them.

Check out my DIY for ducting. I think your on the money as far as dumping air infront of the filters. There's all that dead space in front of them, forcing all the air that supplies the car to come from behind.

ZKindaGuy · 09-06-2009, 07:54 AM

Quote:

Originally Posted by wstar

He might be thinking the water pump is belt driven for some reason. I can't recall any car I've owned where that was the case (including the new Z), but I suppose some car must be set up that way.

Yes I wasn't aware that the water pump on the Z is electric (I assume then?).

It isn't that "some car must be set up that way". Many cars are still set up with the serpintine belt driving the waterpump. That is why I asked the question. Putting UD's on a car using a belt driven waterpump, the pump turns much less than with the stock pullies on the car. So the cycling of water is much less.

Higher temps is something a person running UD's on a belt driven waterpump always has to keep in mind particularly if the owner decides to put a blower on a car after installing UD pullies on a car that has a belt driven waterpump.

1slow370 · 09-07-2009, 05:04 AM

ok the water pump is driven by the timing set(chains)

the power brakes run on engine vacuum

Why not make a pulley for the supercharger kit that overspins the blower to work with the underdriven crank?

Is the rubber harmonic section on the stock crank pulley just there for show?

Does a brother have to kill to get a timing scale instead of three stupid dimples?

How accurately is the zero timing mark located in relation to TDC (like less than a degree?)

08-31-2009, 09:27 AM	#47 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	Seems a few people have taken them off already. Don't know why? Curious to hear though __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

08-31-2009, 02:27 PM	#49 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	Or maybe they don't like what it does to the windshield wipers. KIDDING! (Sorry, I couldn't resist.) __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

09-01-2009, 08:27 AM	#52 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	^ G3 if you're looking for big gains. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

09-02-2009, 08:29 AM	#56 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	I'm not seeing the connection. What does a UD pulley have to do with oil temps? __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 03:25 PM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 01:15 PM
STILLEN lightweight crank pulley	u155282	Engine & Drivetrain	97	08-01-2011 10:33 PM
stillen lightweight crank pulley	black09Z	Engine & Drivetrain	20	04-25-2009 09:00 AM
STILLEN 370Z Underdrive Pulleys Released	Josh@STILLEN	Engine & Drivetrain	38	04-20-2009 02:21 PM

08-31-2009, 08:34 AM	#46 (permalink)
Shunya A True Z Fanatic Join Date: May 2009 Location: Vancouver Posts: 3,069 Drives: You Crazy! Rep Power: 22	woooo 5whp is alot considering it's coming from a lil thing like that lol

08-31-2009, 02:33 PM	#50 (permalink)
tcarretti Base Member Join Date: Jul 2009 Location: Texas Posts: 78 Drives: 09 370Z Rep Power: 16	Semtex, Took me a second to realize you were kidding! Good one! Tony

09-07-2009, 05:04 AM	#60 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	ok the water pump is driven by the timing set(chains) the power brakes run on engine vacuum Why not make a pulley for the supercharger kit that overspins the blower to work with the underdriven crank? Is the rubber harmonic section on the stock crank pulley just there for show? Does a brother have to kill to get a timing scale instead of three stupid dimples? How accurately is the zero timing mark located in relation to TDC (like less than a degree?)