Clutch Decisions for Track

SPOHN · 11-29-2011, 01:37 PM

Due to some circumstances I've decided to change my clutch and flywheel out. Plus the CSC. But that's for another topic. Any recommendations? But first my plans are for a not just a good clutch but a great clutch for the track. Something much better than stock. I also don't want the stock feel of the clutch. I want something stiffer. So I was thinking a 6 puck design. The flywheel Im not so worried about. That's a easy decision. Nothing crazy priced such as a OS Giken. Most as priced the same just wondering about clutch design and behavior. Opinions anyone? Remember more track orientated than street able. But not over the top.

Mike · 11-29-2011, 07:21 PM

I don't know. My opinion and experience, for what its worth, is the stock clutch is fine for road racing. Drag strip and launching is a whole different animal, but with proper heel-toe, you really aren't stressing the clutch that much.

SPOHN · 11-30-2011, 06:59 AM

Yea I believe the stock is more than ok. I just would feel better with something a little better along with a stiffer feel. I also talk to John yesterday and he said there didn't change out you CSC. It was only your clutch. I still feel that the CSC is my issue. But time will tell.

Zat_Zuma · 11-30-2011, 01:56 PM

Personally I have very little track experience on my clutch/flywheel setup but lots of street time.

I would recommend the Southbend clutches and flywheel combination with the CSC HD upgrade. Talk to Joe @ Z Speed Performance for his recommendations.

I have the Stage 3 clutch and the billet flywheel, stock CSC and bearing sleeve. Plus I've drilled out the copper orifice block and put a longer than stock stainless clutch line and triple insulated it. This moves the clutch line closer to the body and more away from the hot exhaust piping. More insulation helps too.

The feel of the clutch is solid but not too hard for everyday use. I haven't replaced the stock CSC yet as it's still working well and if it ain't broke ..... but I do have a upgraded CSC on stand-by.

I think this will be a perfect solution for your track duties and the fact that your continuously working the clutch CSC with your heel and toe routine.
A lighter pressure plate on a stage 1 or 2 might be a better choice for the track.

Some thoughts that may be wrong or not

A heavier flywheel will keep the RPM's up longer than a lighter flywheel plus take the heat a lot better. Bonus: no rattles

You might consider a clutch fluid cooler to help with the temps

SPOHN · 11-30-2011, 02:55 PM

Thanks for all the suggestions. I really want to go with a heavier duty CSC. But I have been told of even one of these failing. Do they offer any type of warranty on that? I'll give them a call. I have several things to work out and I'm not jumping the gun. Especially to a sales pitch. Shops are so eager these days.

Zat_Zuma · 11-30-2011, 07:16 PM

Completely understandable from the sales pitch point of view. I just found that Joe spoke my language and had a good answer to each one of my questions and problems I experienced in the past with the issues I had with previous clutch setups.

I believe with anything mechanical, any type of failure is possible with a production item. It's just a pain in wallet when it's time to remove a transmission, just to replace a CSC.

Plus I believe the HD CSC offered by Z Speed Performance is the only best option out there for a CSC replacement, at this time.

HKYStormFront · 11-30-2011, 07:34 PM

chris, i've driven several cars with 6 puck clutches, they are very ornery on the road, especially taking off. that might be a little aggressive unless you are planning to go forced induction sometime soon. i think this would suit ya just fine:

Z1 370Z / G37 Clutch and Flywheel combo

SPOHN · 11-30-2011, 07:35 PM

I'm most likely going to use the HD CSC. Got to do something that's going to be a step up over the OEM. Especially with a clutch that's going to have more clamping force.

SPOHN · 11-30-2011, 07:41 PM

Quote:

Originally Posted by HKYStormFront

chris, i've driven several cars with 6 puck clutches, they are very ornery on the road, especially taking off. that might be a little aggressive unless you are planning to go forced induction sometime soon. i think this would suit ya just fine:

Z1 370Z / G37 Clutch and Flywheel combo

This is defiantly high on my list. Especially being Z1's. Just would be a lot easier with my dealings being they pride there self in quality and there local. Plus they love me. Hehe.

HKYStormFront · 11-30-2011, 07:51 PM

Quote:

Originally Posted by SPOHN

This is defiantly high on my list. Especially being Z1's. Just would be a lot easier with my dealings being they pride there self in quality and there local. Plus they love me. Hehe.

Jon@Z1 -->

<-- Chris' coin purse

SPOHN · 11-30-2011, 08:02 PM

Damn.

HKYStormFront · 11-30-2011, 08:02 PM

Quote:

Originally Posted by SPOHN

Damn.

VQStryker · 11-30-2011, 08:25 PM

Looking forward to see what you go with

I went with the southbend TZR clutch, CSC and the ACT flywheel.

SPOHN · 11-30-2011, 09:23 PM

I'll have it figured out next week I have a lot of things going on this week. I can hardly think.

SPOHN · 12-03-2011, 02:48 PM

Any more suggestions and reviews? Especially on a 6 puck. I really fill I'm going to settle on this reguardless.

11-29-2011, 01:37 PM	#1 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Clutch Decisions for Track Due to some circumstances I've decided to change my clutch and flywheel out. Plus the CSC. But that's for another topic. Any recommendations? But first my plans are for a not just a good clutch but a great clutch for the track. Something much better than stock. I also don't want the stock feel of the clutch. I want something stiffer. So I was thinking a 6 puck design. The flywheel Im not so worried about. That's a easy decision. Nothing crazy priced such as a OS Giken. Most as priced the same just wondering about clutch design and behavior. Opinions anyone? Remember more track orientated than street able. But not over the top. __________________

11-29-2011, 07:21 PM	#2 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I don't know. My opinion and experience, for what its worth, is the stock clutch is fine for road racing. Drag strip and launching is a whole different animal, but with proper heel-toe, you really aren't stressing the clutch that much. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-30-2011, 06:59 AM	#3 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Yea I believe the stock is more than ok. I just would feel better with something a little better along with a stiffer feel. I also talk to John yesterday and he said there didn't change out you CSC. It was only your clutch. I still feel that the CSC is my issue. But time will tell. __________________

11-30-2011, 01:56 PM	#4 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Personally I have very little track experience on my clutch/flywheel setup but lots of street time. I would recommend the Southbend clutches and flywheel combination with the CSC HD upgrade. Talk to Joe @ Z Speed Performance for his recommendations. I have the Stage 3 clutch and the billet flywheel, stock CSC and bearing sleeve. Plus I've drilled out the copper orifice block and put a longer than stock stainless clutch line and triple insulated it. This moves the clutch line closer to the body and more away from the hot exhaust piping. More insulation helps too. The feel of the clutch is solid but not too hard for everyday use. I haven't replaced the stock CSC yet as it's still working well and if it ain't broke ..... but I do have a upgraded CSC on stand-by. I think this will be a perfect solution for your track duties and the fact that your continuously working the clutch CSC with your heel and toe routine. A lighter pressure plate on a stage 1 or 2 might be a better choice for the track. Some thoughts that may be wrong or not A heavier flywheel will keep the RPM's up longer than a lighter flywheel plus take the heat a lot better. Bonus: no rattles You might consider a clutch fluid cooler to help with the temps __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

11-30-2011, 02:55 PM	#5 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Thanks for all the suggestions. I really want to go with a heavier duty CSC. But I have been told of even one of these failing. Do they offer any type of warranty on that? I'll give them a call. I have several things to work out and I'm not jumping the gun. Especially to a sales pitch. Shops are so eager these days. __________________

11-30-2011, 07:16 PM	#6 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Completely understandable from the sales pitch point of view. I just found that Joe spoke my language and had a good answer to each one of my questions and problems I experienced in the past with the issues I had with previous clutch setups. I believe with anything mechanical, any type of failure is possible with a production item. It's just a pain in wallet when it's time to remove a transmission, just to replace a CSC. Plus I believe the HD CSC offered by Z Speed Performance is the only best option out there for a CSC replacement, at this time. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD Last edited by Zat_Zuma; 11-30-2011 at 07:18 PM.

11-30-2011, 07:34 PM	#7 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	chris, i've driven several cars with 6 puck clutches, they are very ornery on the road, especially taking off. that might be a little aggressive unless you are planning to go forced induction sometime soon. i think this would suit ya just fine: Z1 370Z / G37 Clutch and Flywheel combo __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

11-30-2011, 07:35 PM	#8 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I'm most likely going to use the HD CSC. Got to do something that's going to be a step up over the OEM. Especially with a clutch that's going to have more clamping force. __________________

11-30-2011, 08:02 PM	#11 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Damn. __________________

11-30-2011, 08:25 PM	#13 (permalink)
VQStryker Track Member Join Date: Jul 2011 Location: Texas Age: 36 Posts: 659 Drives: :( Rep Power: 15	Looking forward to see what you go with I went with the southbend TZR clutch, CSC and the ACT flywheel.

11-30-2011, 09:23 PM	#14 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I'll have it figured out next week I have a lot of things going on this week. I can hardly think. __________________

12-03-2011, 02:48 PM	#15 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Any more suggestions and reviews? Especially on a 6 puck. I really fill I'm going to settle on this reguardless. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boiled clutch fluid at the track!	atropine	Track / Autocross / Drifting / Dragstrip	8	09-26-2011 02:49 PM
Decisions, Decisions: Keep the Z or buy an SUV	initialgemini	Other Vehicles	5	05-10-2011 03:47 PM
Decisions! Decisions!	Israeli_Z	Nissan 370Z General Discussions	17	04-04-2011 12:09 AM
Decisions.....	AlexZ82	Nismo 370Z	10	02-19-2011 07:17 AM
Decisions decisions	srt4tw	Nissan 370Z General Discussions	23	09-16-2009 06:22 PM