SZ Updated Clutch & Flywheel Kits

Seb@SZ · 10-23-2011, 04:19 PM

Hi guys

We've updated our new clutch system to use an even lighter flywheel over our original design. Now weighing in at 13 lbs and with a complete assembly weight with clutch and flywheel for 31 lbs. A nice 17 lbs saving. This translates for an even more responsive throttle and engine with much better shifting at high RPM. We also are now using a tried and true Tilton Racing Slave to replace the factory CSC.

The complete assemblies are balanced for silky smooth engine balance.

Max Street Clutch

Our Tilton slave includes the adapter plate, hardware, and SS lines. No modifications are needed to bolt the unit in. Very straightforward and simple install.

We have three clutch options to choose from.
The Max Street which is perfect for the street driver looking to hold over 600 whp and have a super smooth engagement.

The Max 6-Puck made for those looking for our smoothest engaging pucked disc with added holding power and ability to take the abuse of drag strip launches.

The High 5-Puck uses a solid aluminum un-sprung hub that saves even more weight to help make quicker shifts at high RPMs.

If any of you have any questions please ask!

Available at our store: SZ Clutch & Flywheel Kit

SPOHN · 10-23-2011, 05:57 PM

Interesting. How much real world testing have you guys done with this setup, especially with the CSC?

Seb@SZ · 10-23-2011, 06:34 PM

Quote:

Originally Posted by SPOHN

Interesting. How much real world testing have you guys done with this setup, especially with the CSC?

We've done a good amount of time with this particular unit. Along with this particular slave being used in other abusive applications with great results. This slave is used in many racing applications.

christian370z · 10-24-2011, 11:41 AM

Christian likes this thread. Good job Seb! Do you have one of these in the TT370Z?

Seb@SZ · 10-24-2011, 04:01 PM

Quote:

Originally Posted by christian370z

Christian likes this thread. Good job Seb! Do you have one of these in the TT370Z?

Thanks Christian. Yes, I have one in the TT 370Z. A High 5 for drag strip duties.

Glokwork · 11-19-2011, 12:24 PM

I'm interested....starting to gather parts for my FI build. PM some prices on clutch, flywheels and csc. Looking to have something to take abuse and not a pain to drive around. Will be around 500whp daily driver...

Seb@SZ · 11-19-2011, 10:04 PM

Quote:

Originally Posted by Glokwork

I'm interested....starting to gather parts for my FI build. PM some prices on clutch, flywheels and csc. Looking to have something to take abuse and not a pain to drive around. Will be around 500whp daily driver...

PM'ed, thank you.

NYBladeZ · 11-20-2011, 01:31 AM

Can you go into more details about the different levels in your setup? 6 puck v. Street v. High 5.

nismo 1234 · 11-20-2011, 02:02 AM

interested in the price for max street clutch flywheel and CSC.
price shipped to vancouver bc v3e 0a5 please

Seb@SZ · 11-21-2011, 03:05 PM

Quote:

Originally Posted by NYBladeZ

Can you go into more details about the different levels in your setup? 6 puck v. Street v. High 5.

Sure, what I sent someone earlier.

We have three different clutches (discs) to choose from. All three will handle forced induction power no problem.

The street disc is perfect for someone who daily drives the car for an ultra smooth engagement. Its only downsides is that it doesn't like to get slipped (drag racing). I have customers who still drag race with it but I warn them that if they slip it to much it will glaze the disc and render it useless.

The next stage would be the 6-Puck. It uses a sprung hub and is very streetable even with the more aggressive material. It is made for more aggressive driving like drag racing (launches). Life expectancy is about 15,000 to 25,000 miles. Of course any clutch is dependent on the abuse and driver use.

The High 5 is the ultimate in racing use. I daily drive my Z with it but it is a little harsher on the engagement. It uses our lightest disc for the best high RPM shifts.

let me know if you have any other questions.

Seb

Seb@SZ · 11-21-2011, 03:36 PM

Quote:

Originally Posted by nismo 1234

interested in the price for max street clutch flywheel and CSC.
price shipped to vancouver bc v3e 0a5 please

PM'ed

Seb

1slow370 · 11-26-2011, 01:55 AM

Now THAT is better! That compared to the old unit was why i gave you guys ****. this is how its supposed to be done. also just curious how light is the friction disc on your highest streetable setup if there was one thing with this car i'd want to reduce the weight on the input shaft to ease the synchro's job. support for 500ft/lbs holding capacity

Seb@SZ · 11-27-2011, 12:22 AM

Quote:

Originally Posted by 1slow370

Now THAT is better! That compared to the old unit was why i gave you guys ****. this is how its supposed to be done. also just curious how light is the friction disc on your highest streetable setup if there was one thing with this car i'd want to reduce the weight on the input shaft to ease the synchro's job. support for 500ft/lbs holding capacity

lol!

Just for you:

We'll start things off with our modified street disc. Coming in at 3.8 lbs. Perfect for the driver who wants very silky smooth engagements and won't be tearing it up at the drag strip.

Our 6-Puck comes in just a tad lighter than the street disc. This disc is for those who are mean to the drive-train assaulting it with clutch dumps and high horsepower.

Next up is the competitor's feramic disc. This puppy comes in at a heavy weight of 4.6 lbs. Feramic materials were developed for agricultural use (tractors, heavy equipment, etc.) It is heavy duty and also heavy on weight. Not really designed for the sports car enthusiast. Notorious for welding themselves to your flywheel as well.

This brings us to our new 5 Puck disc. Extremely lightweight and nimble. Easy on your trans and gives the driver the much needed high RPM shifting desired without sacrificing transmission internals. A must for the spirited driver looking for no compromises. Our pressure plate that goes with this disc is also lighter. Since it is solid it will have some chatter.

Skeeterbop · 11-27-2011, 02:40 AM

PM sent, just trying to find out a few things.

Seb@SZ · 11-27-2011, 02:52 AM

Quote:

Originally Posted by Skeeterbop

PM sent, just trying to find out a few things.

Replied.

Thank you

10-23-2011, 04:19 PM	#1 (permalink)
Seb@SZ Enthusiast Member Join Date: Jan 2010 Location: Chatsworth Posts: 277 Drives: Zs Rep Power: 24	SZ Updated Clutch & Flywheel Kits Hi guys We've updated our new clutch system to use an even lighter flywheel over our original design. Now weighing in at 13 lbs and with a complete assembly weight with clutch and flywheel for 31 lbs. A nice 17 lbs saving. This translates for an even more responsive throttle and engine with much better shifting at high RPM. We also are now using a tried and true Tilton Racing Slave to replace the factory CSC. The complete assemblies are balanced for silky smooth engine balance. Max Street Clutch Our Tilton slave includes the adapter plate, hardware, and SS lines. No modifications are needed to bolt the unit in. Very straightforward and simple install. We have three clutch options to choose from. The Max Street which is perfect for the street driver looking to hold over 600 whp and have a super smooth engagement. The Max 6-Puck made for those looking for our smoothest engaging pucked disc with added holding power and ability to take the abuse of drag strip launches. The High 5-Puck uses a solid aluminum un-sprung hub that saves even more weight to help make quicker shifts at high RPMs. If any of you have any questions please ask! Available at our store: SZ Clutch & Flywheel Kit JC671 likes this. __________________ Z Car Specialists www.specialtyz.com Blog http://specialtyz.com/blog/ Last edited by Seb@SZ; 10-23-2011 at 04:22 PM.

10-23-2011, 05:57 PM	#2 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Interesting. How much real world testing have you guys done with this setup, especially with the CSC? __________________

10-24-2011, 11:41 AM	#4 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	Christian likes this thread. Good job Seb! Do you have one of these in the TT370Z? __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

11-19-2011, 12:24 PM	#6 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 22	I'm interested....starting to gather parts for my FI build. PM some prices on clutch, flywheels and csc. Looking to have something to take abuse and not a pain to drive around. Will be around 500whp daily driver... __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

11-20-2011, 01:31 AM	#8 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	Can you go into more details about the different levels in your setup? 6 puck v. Street v. High 5. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

11-20-2011, 02:02 AM	#9 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 16	interested in the price for max street clutch flywheel and CSC. price shipped to vancouver bc v3e 0a5 please

11-26-2011, 01:55 AM	#12 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Now THAT is better! That compared to the old unit was why i gave you guys **. this is how its supposed to be done. also just curious how light is the friction disc on your highest streetable setup if there was one thing with this car i'd want to reduce the weight on the input shaft to ease the synchro's job. support for 500ft/lbs holding capacity __________________ ANSWER PRICE LIST** Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 11-26-2011 at 01:59 AM.

11-27-2011, 02:40 AM	#14 (permalink)
Skeeterbop A True Z Fanatic Join Date: Jan 2011 Location: Fort Bliss, TX Age: 40 Posts: 1,440 Drives: 2011 GM 370 base SP Rep Power: 16	PM sent, just trying to find out a few things. __________________ Srenity: "Yeah no rest needed to spread the love when your 20 that's for sure...."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SZ New Clutch & Flywheel Kits!	Seb@SZ	Drivetrain/Engine	22	01-17-2013 12:48 AM
\|\|G&M Performance\|\| Summer Long SALE on EXEDY Clutch & Flywheel Kits!	G&M Performance	Drivetrain/Engine	7	07-22-2011 01:22 PM
JWT Clutch&Flywheel VS Nismo Clutch&Flywheel	hyunsoo1803	Engine & Drivetrain	3	05-05-2011 08:57 PM
**Specialty-Z Flywheel & Clutch Kits w\ Upgraded CSC**	Seb@SZ	Drivetrain/Engine	7	03-17-2011 03:14 PM