2012 Z Factory Oil Cooler - PIC AND PART NUMBERS INSIDE

DEpointfive0 · 01-25-2013, 01:08 PM

Quote:

Originally Posted by glenthall

Not unless you want to void your warranty.
Prior to year 2012 using an oil cooler would not void your warranty
unless the cooler damaged the car.

Now with Nissan adding an insufficient POS oil cooler in 2012 as they have,
you cannot remove it (part of the factory installed cooling system) without
voiding your entire engine warranty.

The dealer now has no suggested add'l cooling options for the 2012 model that will not void the warranty.

Nissan has effectively removed the performance experience from their performance car.

This is my 2nd new Z and will be my last Nissan purchase of any kind.

Nissan needs to get their head out of their ***.

Being a warranty master... Brother, you're kinda wrong... Yeah tampering with the cooling is a no-no, but if a dealer says that they're going to void your warranty because you took that POS off, you need a new dealer who is mod friendly.
When the shít does hit the fan in any scenario, revert to stock, but there will be no real evidence this thing was uninstalled.
50% of members have an UpRev tune... THAT will void your warranty, why worry about a factory "oil" cooler

slowpok3 · 04-05-2013, 01:43 PM

Has anybody tried getting an aftermarket radiator (i.e. CSF) for 2012+ to fix oil temperatures? A better radiator should mean lower water temps with which to cool the oil(water cooled oil) and lower oil temps.

BigT · 04-05-2013, 01:56 PM

Quote:

Originally Posted by slowpok3

Has anybody tried getting an aftermarket radiator (i.e. CSF) for 2012+ to fix oil temperatures? A better radiator should mean lower water temps with which to cool the oil(water cooled oil) and lower oil temps.

Water temps will get up to whatever the stock thermostat is set to. You just might slow it down some. The arguement here is, can the coolant keep the oil cool enough?

martin82 · 04-05-2013, 02:01 PM

Why bother, just add another cooler.. I added a 34 row cooler+have stock cooler..

slowpok3 · 04-05-2013, 02:10 PM

The thermostat is where the water leaves the engine, so it will always leave the engine at (approximately) the same temperature (assuming on/off operation). All water has to go through the radiator before it re-enters the engine (and the oil cooler). So a better radiator should mean the water entering the engine (and the oil cooler) will be cooler and better oil cooling performance.

I assume the water routes through the radiator to the oil cooler before it enters the engine. Is this correct? or does the oil cooler take water exiting the engine (which seems dumb to me)?

rlhotka · 06-17-2014, 08:59 PM

I was going crazy wondering what that was on my car and wondering if I could piggy back my race parts wholesale kit on it so it sounds like you can

Do I need to buy an extra adapter?

Owen · 06-29-2014, 03:02 PM

Quote:

Originally Posted by slowpok3

Has anybody tried getting an aftermarket radiator (i.e. CSF) for 2012+ to fix oil temperatures? A better radiator should mean lower water temps with which to cool the oil(water cooled oil) and lower oil temps.

The single pass csf dropped oil temps by 10-15 degrees in normal driving when it was installed. Unfortunately, it appears that I will get to try out a 3 pass too.

No idea what it would do on a track. That said, I was pretty surpised at the difference. It pretty well suggests that if you want to run on track seriously, you should probably get a bigger radiator AND an oil-air oil cooler.

O

Jdmspeed-Z · 07-17-2014, 04:53 AM

Quote:

Originally Posted by martin82

Why bother, just add another cooler.. I added a 34 row cooler+have stock cooler..

How did u add the 34r cooler with the stock cooler on th e 2012 370z?

synolimit · 07-17-2014, 05:03 AM

Quote:

Originally Posted by Jdmspeed-Z

How did u add the 34r cooler with the stock cooler on th e 2012 370z?

Easy, just install it like every other.

04-05-2013, 01:43 PM	#107 (permalink)
slowpok3 Base Member Join Date: Mar 2013 Location: US of A Posts: 2 Drives: a beater Rep Power: 12	Has anybody tried getting an aftermarket radiator (i.e. CSF) for 2012+ to fix oil temperatures? A better radiator should mean lower water temps with which to cool the oil(water cooled oil) and lower oil temps. mwe370z likes this. Last edited by slowpok3; 04-05-2013 at 01:46 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 FTW dyno numbers inside	GambitX	Forced Induction	19	10-27-2011 12:22 PM
need specific part numbers to mount race seats	Mike	Exterior & Interior	1	09-04-2011 10:06 PM
OEM Part numbers and Diyagram?	Valentino	Nissan 370Z Owners Manual / Service Manuals	5	02-09-2010 04:38 PM
NISMO Body Part Numbers request	Scribe	Exterior & Interior	6	05-12-2009 01:01 AM

04-05-2013, 02:01 PM	#109 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Why bother, just add another cooler.. I added a 34 row cooler+have stock cooler..

04-05-2013, 02:10 PM	#110 (permalink)
slowpok3 Base Member Join Date: Mar 2013 Location: US of A Posts: 2 Drives: a beater Rep Power: 12	The thermostat is where the water leaves the engine, so it will always leave the engine at (approximately) the same temperature (assuming on/off operation). All water has to go through the radiator before it re-enters the engine (and the oil cooler). So a better radiator should mean the water entering the engine (and the oil cooler) will be cooler and better oil cooling performance. I assume the water routes through the radiator to the oil cooler before it enters the engine. Is this correct? or does the oil cooler take water exiting the engine (which seems dumb to me)?

06-17-2014, 08:59 PM	#111 (permalink)
rlhotka Base Member Join Date: Apr 2013 Location: Prior Lake Posts: 68 Drives: 2012 370Z white manu Rep Power: 12	I was going crazy wondering what that was on my car and wondering if I could piggy back my race parts wholesale kit on it so it sounds like you can Do I need to buy an extra adapter?