Transmission Mainshaft Input Spline

thehelix112 · 09-28-2011, 02:15 PM

Hey guys,

I don't own a 370Z, but a good friend from work does. I own a 280Z that I am putting a VK56DE into, and am planning on using a 370z transmission. Talking to quarter master atm about a price on the clutch and flywheel to suit this combo and they need to know the specs on the tranmission mainshaft input spline.

Does anyone know the outside diameter and number of splines?

I've downloaded the '09 service manual but have been unable to locate the specs on it in there.

Many thanks,

Dave

johnwigs · 10-02-2011, 12:40 PM

same as any 350z... make sure it is a CD009 transmission... and you are going to need a DE or revup bell housing to make the room for your crank sensor

johnwigs · 10-02-2011, 12:48 PM

or you can use the JWT adapter plate you will then need an automatic belhousing for your applicable engine
http://www.jimwolftechnology.com/new...or_kit_web.jpg

1slow370 · 10-03-2011, 02:54 AM

go to neo's garage he sells a flywheel and adapter plate that takes any 370z aftermarket clutch and the standard 370 6speed and mounts them to a vk56.

09-28-2011, 02:15 PM	#1 (permalink)
thehelix112 Base Member Join Date: Sep 2011 Location: Los Angeles Posts: 2 Drives: Datsun 280Z Rep Power: 14	Transmission Mainshaft Input Spline Hey guys, I don't own a 370Z, but a good friend from work does. I own a 280Z that I am putting a VK56DE into, and am planning on using a 370z transmission. Talking to quarter master atm about a price on the clutch and flywheel to suit this combo and they need to know the specs on the tranmission mainshaft input spline. Does anyone know the outside diameter and number of splines? I've downloaded the '09 service manual but have been unable to locate the specs on it in there. Many thanks, Dave

10-03-2011, 02:54 AM	#4 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	go to neo's garage he sells a flywheel and adapter plate that takes any 370z aftermarket clutch and the standard 370 6speed and mounts them to a vk56. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transmission problem (?) after a transmission fluid change	EWarren	Engine & Drivetrain	7	07-28-2014 12:44 PM
Car Speed Signal Input and Reverse Gear Signal Input tap locations?	rdavidw	Audio & Video	11	09-11-2011 08:24 AM
Looking for some input	igotcabada	Nissan 370Z Pricing / Ordering Discussions	9	10-29-2010 04:29 PM
If anyone has some input...	Znewb	Nissan 370Z General Discussions	5	09-06-2009 10:04 PM

10-02-2011, 12:40 PM	#2 (permalink)
johnwigs Base Member Join Date: Mar 2010 Location: sandyeggo Posts: 7 Drives: hakosuka Rep Power: 15	same as any 350z... make sure it is a CD009 transmission... and you are going to need a DE or revup bell housing to make the room for your crank sensor

10-02-2011, 12:48 PM	#3 (permalink)
johnwigs Base Member Join Date: Mar 2010 Location: sandyeggo Posts: 7 Drives: hakosuka Rep Power: 15	or you can use the JWT adapter plate you will then need an automatic belhousing for your applicable engine http://www.jimwolftechnology.com/new...or_kit_web.jpg