Weird Clutch Pedal Behavior - Please Help/Advise

pty370z · 09-05-2011, 12:10 PM

Hey guys..

I'll try to make my story short, precise, and concise..

It was Sunday afternoon/evening, I was heading back home, no cars on the highway (OK, 1 or 2 cars..)

There was my Z boringly cruising at 55-60mph in 6th gear when I noticed she wanted to go a bit faster.. I downshifted to 3rd gear to get my revs up, synchro'ed, and ready to go, sprinted up to around 120mph (shifting upwards of course), and then let go to let the Z speed down..

I repeated this a couple of times (downshifting to 3rd gear at around 55-60mph) and then sprinted up again but only to around 100mph...

I ended up again in 6th gear.. Here's where it gets weird..

While on 6th gear, I notice the clutch pedal is extremely soft and easy to press and that it had lost the majority of the engagement.. However, I still had probably 2 inches of engagement that allowed me to upshift/downshift..

I continued driving as I didn't have anywhere to stop and went all the way to the toll booth on the highway (not a very long distance but a couple of miles though..) As I approached the toll booth and downshifted to 3rd, 2nd gear at lower speeds, the clutch pedal feel came back to normal...

I paid, started slowly driving away from the toll booth in first gear, then 2nd... All normal... I then started speeding up (carefully) all the way to around 60-70mph in 6th gear and the clutch pedal started acting weird again after a couple of minutes...

As I approached my exit I started going at slower speeds and clutch pedal feel came back to normal and during normal driving for the rest of the night it continued to work normal as if nothing happened...

This morning, also, all normal as if nothing happened...

My very own graphical explanation of this follows: (red color represents where the clutch pedal gets "harder" for engagement)

NORMAL
Pedal---------------Wall
|--------------------|

WTF
Pedal---------------Wall
|--------------------|

What could have caused this? Fluid boiling because of the aggressive driving? CSC?

Should I worry and get this checked by the dealer ASAP? I'm around 1,000 miles away from the next mileage dealer service. Could it wait til then?

I appreciate your input!

98intrigue · 09-05-2011, 12:36 PM

I had the same experience regarding the clutch feel a few weeks ago...even so bad as to having to pull the clutch up with my toes. I've read the Master Cylinder goes bad. I already have an upgraded CSC, so the Master Cylinder is the next failing point for me.

RCZ · 09-05-2011, 12:54 PM

Hey man, that sounds like a really weird problem. I'm gonna be in Panama on the 15th if you need me to bring anything back for ya.

pty370z · 09-05-2011, 01:12 PM

Quote:

Originally Posted by RCZ

Hey man, that sounds like a really weird problem. I'm gonna be in Panama on the 15th if you need me to bring anything back for ya.

How about a twin-turbo or a supercharger? hahahahaha...

An upgraded CSC wouldn't be too bad.. Where can I get one?

BTW, is there an aftermarket Master Cylinder or are we stuck with stock?

Nissanboy · 09-05-2011, 01:14 PM

a possibility might be that you're clutch fluid over heated past it's boiling point and lost pressure. This can be cause by the fluid having too much moisture in it (brake & clutch fluid both uses DOT 3 or DOT 4 which is moisture absorbent) and therefore reducing the boiling point. I'd recommend a clutch fluid flush and putting DOT 4 fluid in there since it's compatible with DOT 3 and has a higher boiling point.

TreeSemdyZee · 09-05-2011, 02:06 PM

Quote:

Originally Posted by pty370z

How about a twin-turbo or a supercharger? hahahahaha...

An upgraded CSC wouldn't be too bad.. Where can I get one?

BTW, is there an aftermarket Master Cylinder or are we stuck with stock?

Upgraded CSC:

2009-2011 370z clutch kits

(They are sponsors on here - Joe@ZSpeed).

RCZ · 09-05-2011, 03:05 PM

Quote:

Originally Posted by pty370z

How about a twin-turbo or a supercharger? hahahahaha...

An upgraded CSC wouldn't be too bad.. Where can I get one?

BTW, is there an aftermarket Master Cylinder or are we stuck with stock?

Hehe, sure I'll bring it for you but you gotta pay

If you want me to bring you one, you gotta act quick so I get it by the 14th. I'll be in Panama the 15th. We should meet up!

There is no am master, only stock for now. Someone was working on one though...

Boost_lee · 09-05-2011, 05:45 PM

I experienced this issue on the track last saturday. I had to pick up the clutch with my foot while driving the course to make it to the pits. the car was pretty hot as we did many back to back laps with little to no cool down. the fluid was a bit under the min mark, and after topping it off and letting it cool, the pedal is back to normal.

Going to try a stainless couch line with better high temp fluid before I track the car again.

Thunderthief · 06-16-2013, 11:50 AM

Does anyone know what cases this behavior on the pedal? I am having the exact same problem on my car. 6th gear feels soft then goes back to normal!

Jsolo · 06-16-2013, 12:48 PM

If it's not a CSC/MC failure, then likely moisture in the fluid causing it to boil. I recall reading about a tsb for replacement of the fluid with the gtr's brake fluid (high wet and dry boiling points).

Thunderthief · 06-16-2013, 01:55 PM

Thanks Jsolo. I will try changing the clutch fluid first to see if it fixes the problem.

Mozen · 06-17-2013, 12:02 PM

Just to throw in on this old thread but i had the same issues with my aftermarket SPEC clutch and flywheel combo in the car. Replaced the Master cylinder and it solved the problem.

sdwindr1 · 06-19-2013, 06:25 PM

Quote:

Originally Posted by Mozen

Just to throw in on this old thread but i had the same issues with my aftermarket SPEC clutch and flywheel combo in the car. Replaced the Master cylinder and it solved the problem.

I actually experienced this issue yesterday. Currently in the shop. about 1 inch on engagement and wont lift the pedal back up. Changing out the CMS and doing a flush. After reading, maybe I should request DOT4 as well?

Stock Everything transmission wise... 44k Mi.

PharmDZ · 06-20-2013, 01:18 AM

Hmmm odd... I just had this problem today. I felt like the clutch was going soft on me at certain times. It would go stiff/normal again and then go soft. I changed my line to the z1 SS and flushed with motul rbf600 the other day, and before I did this it was fine. Maybe I didn't flush it enough? I dunno...

Joe@ZSpeed · 06-20-2013, 05:10 PM

Flush with fresh fluid first, After that doesn't help, change the master cylinder..

Nissan OEM Clutch Master Cylinder 370Z G37

09-05-2011, 12:10 PM	#1 (permalink)
pty370z Track Member Join Date: Apr 2009 Location: Panama City, Panama Posts: 654 Drives: over the speed limit Rep Power: 17	Weird Clutch Pedal Behavior - Please Help/Advise Hey guys.. I'll try to make my story short, precise, and concise.. It was Sunday afternoon/evening, I was heading back home, no cars on the highway (OK, 1 or 2 cars..) There was my Z boringly cruising at 55-60mph in 6th gear when I noticed she wanted to go a bit faster.. I downshifted to 3rd gear to get my revs up, synchro'ed, and ready to go, sprinted up to around 120mph (shifting upwards of course), and then let go to let the Z speed down.. I repeated this a couple of times (downshifting to 3rd gear at around 55-60mph) and then sprinted up again but only to around 100mph... I ended up again in 6th gear.. Here's where it gets weird.. While on 6th gear, I notice the clutch pedal is extremely soft and easy to press and that it had lost the majority of the engagement.. However, I still had probably 2 inches of engagement that allowed me to upshift/downshift.. I continued driving as I didn't have anywhere to stop and went all the way to the toll booth on the highway (not a very long distance but a couple of miles though..) As I approached the toll booth and downshifted to 3rd, 2nd gear at lower speeds, the clutch pedal feel came back to normal... I paid, started slowly driving away from the toll booth in first gear, then 2nd... All normal... I then started speeding up (carefully) all the way to around 60-70mph in 6th gear and the clutch pedal started acting weird again after a couple of minutes... As I approached my exit I started going at slower speeds and clutch pedal feel came back to normal and during normal driving for the rest of the night it continued to work normal as if nothing happened... This morning, also, all normal as if nothing happened... My very own graphical explanation of this follows: (red color represents where the clutch pedal gets "harder" for engagement) NORMAL Pedal---------------Wall \|--------------------\| WTF Pedal---------------Wall \|--------------------\| What could have caused this? Fluid boiling because of the aggressive driving? CSC? Should I worry and get this checked by the dealer ASAP? I'm around 1,000 miles away from the next mileage dealer service. Could it wait til then? I appreciate your input! __________________ 2010 Solid Red 370Z * *Touring-Sport-6MT Black Interior Performance:** STILLEN * BERK * UR * MISHIMOTO * K&N * Z1 * ZSPEED * UPREV * DBA Interior: GT-R Red Start/Stop Button * MSA Floor Mats * PW:JDM Exterior: INGS+1 * SEIBON * FUJIMURA * PW:JDM * UAM * KICS * VOLK Last edited by pty370z; 09-05-2011 at 12:13 PM.

09-05-2011, 12:36 PM	#2 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	I had the same experience regarding the clutch feel a few weeks ago...even so bad as to having to pull the clutch up with my toes. I've read the Master Cylinder goes bad. I already have an upgraded CSC, so the Master Cylinder is the next failing point for me. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

09-05-2011, 05:45 PM	#8 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	I experienced this issue on the track last saturday. I had to pick up the clutch with my foot while driving the course to make it to the pits. the car was pretty hot as we did many back to back laps with little to no cool down. the fluid was a bit under the min mark, and after topping it off and letting it cool, the pedal is back to normal. Going to try a stainless couch line with better high temp fluid before I track the car again. __________________ My TT Z

06-16-2013, 12:48 PM	#10 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 15	If it's not a CSC/MC failure, then likely moisture in the fluid causing it to boil. I recall reading about a tsb for replacement of the fluid with the gtr's brake fluid (high wet and dry boiling points). Thunderthief likes this. __________________ G37S Sedan 6MT, Eibach swaybars, Invidia Exhaust, Weaker Clutch Pedal Spring For sale links

06-17-2013, 12:02 PM	#12 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	Just to throw in on this old thread but i had the same issues with my aftermarket SPEC clutch and flywheel combo in the car. Replaced the Master cylinder and it solved the problem. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

09-05-2011, 12:54 PM	#3 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Hey man, that sounds like a really weird problem. I'm gonna be in Panama on the 15th if you need me to bring anything back for ya.

09-05-2011, 01:14 PM	#5 (permalink)
Nissanboy Enthusiast Member Join Date: Dec 2010 Location: H-Town Posts: 378 Drives: Too slow Rep Power: 15	a possibility might be that you're clutch fluid over heated past it's boiling point and lost pressure. This can be cause by the fluid having too much moisture in it (brake & clutch fluid both uses DOT 3 or DOT 4 which is moisture absorbent) and therefore reducing the boiling point. I'd recommend a clutch fluid flush and putting DOT 4 fluid in there since it's compatible with DOT 3 and has a higher boiling point.

06-16-2013, 11:50 AM	#9 (permalink)
Thunderthief Base Member Join Date: Jun 2013 Location: Puerto Rico Posts: 2 Drives: 10 Nissan 370z CS MT Rep Power: 12	Does anyone know what cases this behavior on the pedal? I am having the exact same problem on my car. 6th gear feels soft then goes back to normal!

06-16-2013, 01:55 PM	#11 (permalink)
Thunderthief Base Member Join Date: Jun 2013 Location: Puerto Rico Posts: 2 Drives: 10 Nissan 370z CS MT Rep Power: 12	Thanks Jsolo. I will try changing the clutch fluid first to see if it fixes the problem.

06-20-2013, 01:18 AM	#14 (permalink)
PharmDZ Track Member Join Date: Jul 2012 Location: New Jersey Posts: 997 Drives: 11 Nissan 370Z BS M6 Rep Power: 14	Hmmm odd... I just had this problem today. I felt like the clutch was going soft on me at certain times. It would go stiff/normal again and then go soft. I changed my line to the z1 SS and flushed with motul rbf600 the other day, and before I did this it was fine. Maybe I didn't flush it enough? I dunno...

06-20-2013, 05:10 PM	#15 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	Flush with fresh fluid first, After that doesn't help, change the master cylinder.. Nissan OEM Clutch Master Cylinder 370Z G37 __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Weird clutch pedal pressure.	gh0st3794	Engine & Drivetrain	17	05-21-2012 10:03 AM
Clutch pedal gone bad	brakedrift12	Nissan 370Z General Discussions	5	07-04-2011 11:09 PM
clutch pedal issues?	xgrudgex	Engine & Drivetrain	17	01-31-2011 09:44 PM
Weird clutch sensation..	Red370	Nissan 370Z General Discussions	3	09-17-2009 11:59 AM
anybody with a weird clutch sound	ladyv	Nissan 370Z General Discussions	13	09-09-2009 08:42 AM