Up to 90 is good according to GPS on my phone. But my GF is following me and my cruise is set at 74 and she says she is doing
|
|
LinkBack | Thread Tools | Display Modes |
08-28-2011, 04:26 PM | #16 (permalink) |
Base Member
Join Date: Jul 2011
Location: Buda, Tx
Posts: 66
Drives: 08 Infiniti G37s 6mt
Rep Power: 14 |
Up to 90 is good according to GPS on my phone. But my GF is following me and my cruise is set at 74 and she says she is doing 70 and GPS says I'm doing 73. So I'd say at legal speed limits and normal driving your alright.
__________________
2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys |
08-29-2011, 07:16 AM | #22 (permalink) |
Base Member
Join Date: Jul 2011
Location: Buda, Tx
Posts: 66
Drives: 08 Infiniti G37s 6mt
Rep Power: 14 |
I just did a 145 miles on a 1/4 tank cruising between 70-75mph. I doubt it hurts that much.
__________________
2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys |
08-29-2011, 08:02 AM | #23 (permalink) |
A True Z Fanatic
Join Date: Jul 2009
Location: Ontario Canada
Posts: 1,659
Drives: 370 Z 7AT Sports
Rep Power: 19 |
I have the 4.08's in my 7AT and the fuel consuption went for 7.7 L/ 100 km to 8.8 L / 100 km
12.5% increase on a good day . 36.7 m/g to 32.1 CDN gal. I avg city and high way 10.6/ = 26.7 m/g us gal = 22.25 avg. just wait till i get the GTM stage 2. Now i have leaned my car out and that makes a big differnce in aceleration. The gears on a 7 AT make a huge difference. standing 1/4 mie 12.42 @ 114.37 2 nd gear is the gear of punishment for what ever is beside me the car just flys like it has nitrous. Simply just put you back in the seat. the fuel consumption get a lot worse if you start putting your foot into it.
__________________
12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. |
08-29-2011, 10:13 AM | #24 (permalink) |
Base Member
Join Date: Jul 2011
Location: Buda, Tx
Posts: 66
Drives: 08 Infiniti G37s 6mt
Rep Power: 14 |
I really wish my car was 400lbs lighter. A 12.4 would be plenty for me.
__________________
2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys |
08-29-2011, 02:32 PM | #26 (permalink) |
Base Member
Join Date: Jul 2011
Location: Buda, Tx
Posts: 66
Drives: 08 Infiniti G37s 6mt
Rep Power: 14 |
I put smaller cats on does that count HAHA
__________________
2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys |
08-29-2011, 03:31 PM | #27 (permalink) |
A True Z Fanatic
Join Date: Jun 2011
Location: Maryland
Posts: 1,393
Drives: 11 370 6mt pw w/sp
Rep Power: 16 |
I did the ART pipes - 6.5 lbs from stock cats and then removed the cat brace which is about 3 lbs (only by holding it) ... so 9 lbs there. If I go with the F.I. exhaust then i'd lose another 10 lbs... the whole spare set-up with no sub is about 40 or 42 lbs someone said on here... so there's 50 lbs. seats, smaller battery, even get a nice set of speakers and take out the others, etc. etc. lose some weight on our bodies lol.. i'm about 170... i'm getting back down to about 155 or so (not for the car just for health). Once they crack the VVEL I look for our cars to be able to gain another 20 whp or so maybe... hopefully with a set of cams and such.
|
08-29-2011, 05:53 PM | #28 (permalink) |
Base Member
Join Date: Jul 2011
Location: Buda, Tx
Posts: 66
Drives: 08 Infiniti G37s 6mt
Rep Power: 14 |
I might ditch the spare but I'm getting ready to add a couple subs so lol
__________________
2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys |
09-02-2011, 11:08 AM | #29 (permalink) |
Base Member
Join Date: Jun 2011
Location: Oklahoma
Posts: 16
Drives: 09 BO G37S 6MT
Rep Power: 14 |
Hey quicksilver - did you buy an install kit for the seals/bearings or did you piece what you needed together on your own.
jnaut in his thread didn't need the side bearings/seals - or even the front seal for that matter. I just don't see how you could get in there and not replace those all the way around. Any downsides to the new pulleys? Noises etc?
__________________
09 G37S 6MT // EIBACH // VOSSEN // INVIDIA GEMINI // TAKEDA // MOTORDYNE // SPC // UPREV // 4.08 GEARS |
09-02-2011, 11:38 AM | #30 (permalink) |
Base Member
Join Date: Jul 2011
Location: Buda, Tx
Posts: 66
Drives: 08 Infiniti G37s 6mt
Rep Power: 14 |
I used the list he posted in his thread and it all went smooth.
I've got a weird feeling in my clutch pedal that wasn't there before but I don't know if its the pulleys or a line resting on the frame or something else. The steering wheel is maybe 1% harder to turn in a parking lot but is still easily spinable with one finger. I'm looking forward to getting some miles on it this weekend. This old work truck sucks haha
__________________
2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Baker Tuning: 2009 370Z with GTM Stage 2 TT Turn Key | DIGItonium | Forced Induction | 151 | 05-20-2012 11:16 PM |
Baker Tuning Meet with guest Sam@GTM | theDreamer | Texas | 50 | 02-21-2011 10:37 AM |
Quick stop at Baker Tuning | theDreamer | Nissan 370Z General Discussions | 13 | 11-01-2010 10:52 AM |
*****Baker Tuning (May Day Garage) | JB-370z | Texas | 0 | 07-13-2010 03:18 PM |
[Hou] All Nissan Meet Host by ZCoH & Baker Nissan/Baker Tuning | Robert_K | Texas | 36 | 07-12-2010 07:56 AM |