Cost of a vk56 swap

FlyByGTI · 08-11-2014, 09:57 AM

Quote:

Originally Posted by 1slow370

Fi is not out of the question, i have been thinking about a little something, maybe a small insta boost turbo for 450-500hp

Sent from my HTCONE using Tapatalk

The idea of the small single turbo is a great idea. One idea that seemed like something I'd consider would be a twin turbo setup with 2 different sized turbos. One small for that instant boost and another larger one for big power up top

Quote:

Originally Posted by 1slow370

the heads are probably going to get worked over, port polish, jun stage 2's maybe a little something xtra

that's gonna be sweet

FPenvy · 08-11-2014, 09:58 AM

Quote:

Originally Posted by FlyByGTI

The idea of the small single turbo is a great idea. One idea that seemed like something I'd consider would be a twin turbo setup with 2 different sized turbos. One small for that instant boost and another larger one for big power up top

just like the BMW and Audi bi-turbos lol

FlyByGTI · 08-11-2014, 09:59 AM

Quote:

Originally Posted by FPenvy

just like the BMW and Audi bi-turbos lol

Yeah exactly. I wonder how a twin charger setup would work in the Z

FPenvy · 08-11-2014, 10:01 AM

Quote:

Originally Posted by FlyByGTI

Yeah exactly. I wonder how a twin charger setup would work in the Z

not sure. you'd probably need the input of someone with more boost knowledge than myself lol

aszyd · 08-11-2014, 10:40 AM

Sequential twins would be pretty sweet. That would be an interesting take on FI for the VQ.

1slow370 · 08-11-2014, 12:47 PM

Sequential's are kind of a pain in the **** because there is a lot more to it than just putting two different sized turbo's on it. you end up needing to add in exhaust valves and intake valves, and a way to control them so that when say number 1 turbo is spooling up the air isnt just blowing through the larger number two turbo's compresser housing backwards.

Spooler · 08-11-2014, 02:04 PM

Quote:

Originally Posted by 1slow370

Sequential's are kind of a pain in the **** because there is a lot more to it than just putting two different sized turbo's on it. you end up needing to add in exhaust valves and intake valves, and a way to control them so that when say number 1 turbo is spooling up the air isnt just blowing through the larger number two turbo's compresser housing backwards.

It's called compound turbo charging and is done all the time in the diesel performance world. It has also been done on OTR heavy haul truck engines. Cat has a setup like this. There is also tripple compound turbo charging. Turbo sizing is key to keep each charger in it's map.

G37Sam · 08-11-2014, 02:43 PM

Or you can buy one of Porsche's variable turbine geometry turbo's and call it a day.

1slow370 · 08-11-2014, 02:59 PM

Yeah no... I dont really care anyway anything past 500hp is worthless to me at this point. And vgt turbos have reiability issues

Sent from my HTCONE using Tapatalk

Sidewaysthe7 · 08-11-2014, 03:01 PM

I'm just jumping in here, but this conversation got pretty interesting. I am looking into possibly swapping a VK56 into a Y34, but for the Z guys, why not the VK45 instead of the 56? Seems like it might be a bit easier and should still make plenty power.

1slow370 · 08-11-2014, 04:27 PM

Quote:

Originally Posted by Spooler

It's called compound turbo charging and is done all the time in the diesel performance world. It has also been done on OTR heavy haul truck engines. Cat has a setup like this. There is also tripple compound turbo charging. Turbo sizing is key to keep each charger in it's map.

no compound or series charging is when one turbo FEEDS the other turbo. They use it in the diesel world because by doing so you stack pressure ratios. so if one turbo can efficiently compress the air to 39psi absolute it feeds that charge into the second turbo that can push it up to 109psi while still in it's efficiency island. Diesels love having more compression so by doing this even if the turbos are relatively small it allows the engine to run at a much higher dynamic compression ratio.

Edit: the key in sizing doing that is just to match the pressure ratio's and efficiencies of the two turbo to get the target boost pressure, and to make sure that the intake turbo can flow enough compressed air to supply the second turbo

The VH45 is no bigger than a stroked vq so by going vk5.6 you have enough extra displacement to really make a crazy build worth it. the vh is good engine, revs higher than a vk stock but it is a little small to justify it.

Sidewaysthe7 · 08-11-2014, 05:04 PM

Quote:

Originally Posted by 1slow370

...The VH45 is no bigger than a stroked vq so by going vk5.6 you have enough extra displacement to really make a crazy build worth it. the vh is good engine, revs higher than a vk stock but it is a little small to justify it.

You're correct, but I'm referring to the VK45, not the VH45.

1slow370 · 08-11-2014, 06:26 PM

Quote:

Originally Posted by Sidewaysthe7

You're correct, but I'm referring to the VK45, not the VH45.

same deal. since vk45 and the vk56 are basically the same engine but one is bigger, cheaper, and more available the choice is easy.

Wonka2581 · 11-25-2015, 08:14 AM

Subd for later!

1slow370 · 11-25-2015, 11:04 AM

Well the platform changed a bit but same swap. its going in the 260z now hahaha. got the motor for 1500 with low miles, picked up a freshly rebuilt vortech v1 s-trim for 300 dollas and the trans came from the donor car for the 350z subframes. Still need a clutch and flywheel.

08-11-2014, 10:40 AM	#185 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	Sequential twins would be pretty sweet. That would be an interesting take on FI for the VQ. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

08-11-2014, 12:47 PM	#186 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Sequential's are kind of a pain in the ** because there is a lot more to it than just putting two different sized turbo's on it. you end up needing to add in exhaust valves and intake valves, and a way to control them so that when say number 1 turbo is spooling up the air isnt just blowing through the larger number two turbo's compresser housing backwards. DEpointfive0 likes this. __________________ ANSWER PRICE LIST** Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-11-2014, 02:43 PM	#188 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 21	Or you can buy one of Porsche's variable turbine geometry turbo's and call it a day. __________________ '14 Viper GTS '08 RB'd G37S - Sold

08-11-2014, 02:59 PM	#189 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Yeah no... I dont really care anyway anything past 500hp is worthless to me at this point. And vgt turbos have reiability issues Sent from my HTCONE using Tapatalk __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-11-2014, 03:01 PM	#190 (permalink)
Sidewaysthe7 Base Member Join Date: Jul 2014 Location: DFW, TX Posts: 29 Drives: '12 Infiniti M35h Rep Power: 11	I'm just jumping in here, but this conversation got pretty interesting. I am looking into possibly swapping a VK56 into a Y34, but for the Z guys, why not the VK45 instead of the 56? Seems like it might be a bit easier and should still make plenty power. __________________ -Brandon 2003 Infiniti M45 1981 Chevrolet Silverado RCLB (heh, try me)

11-25-2015, 08:14 AM	#194 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	Subd for later! __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

11-25-2015, 11:04 AM	#195 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Well the platform changed a bit but same swap. its going in the 260z now hahaha. got the motor for 1500 with low miles, picked up a freshly rebuilt vortech v1 s-trim for 300 dollas and the trans came from the donor car for the 350z subframes. Still need a clutch and flywheel. GaleForce and Meulen like this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SWAP: Possibly looking to swap my seibon carbon wing hatch for wingless hatch	RCZ	Parts for sale (Private Classifieds)	13	04-11-2011 06:28 PM
2jz swap	Gunzero	Engine & Drivetrain	14	08-23-2010 11:57 PM
But how much does it REALLY cost....	BjjKing	Nissan 370Z Pricing / Ordering Discussions	17	09-22-2009 10:41 PM
Swap 7AT for 6MT	Gabriel77	Nissan 370Z General Discussions	34	08-26-2009 11:09 AM
Any one else' Z cost this much?	370Z_Girl_close	Canada	8	04-24-2009 02:23 PM