Drop Engineering Engine Mounts

KamiSpeed · 10-21-2011, 04:47 PM

Quote:

Originally Posted by fuct

last thing i want to do is introduce more vibration into the cabin. its like we driving a truck engine or something...

well you lose some comfort but gain response and feel, its a trade off that applies to some people but not all... It'd be amazing to have the best of both world haha

NeverBoneStck · 10-21-2011, 05:44 PM

To me the trade off was worth it .. Nice response and it takes about 500 miles to fully break in .. Can't wait for the motor mounts ..

christian370z · 10-22-2011, 06:43 PM

Quote:

Originally Posted by KamiSpeed

well you lose some comfort but gain response and feel, its a trade off that applies to some people but not all... It'd be amazing to have the best of both world haha

How much more vibration enters the cabin? I find that the Z is actually very smooth at idle and low rpm, I'd almost wish there was a bit more engine feel present. Does it really improve engine response as well?

fuct · 10-24-2011, 12:39 PM

Quote:

Originally Posted by christian370z

How much more vibration enters the cabin? I find that the Z is actually very smooth at idle and low rpm, I'd almost wish there was a bit more engine feel present. Does it really improve engine response as well?

id hope the car would be smooth at idle and low rpm. im talking about anything above 3k rpms

doesnt sound like you even need new engine mounts.

O&G · 10-24-2011, 04:16 PM

We used the tranny mount on my custom single turbo build. It's a great upgrade, shifts are smooth and tighter. Vibration is minimal, I don't notice at all! I will be posting a write up about the build soon, look for it!

NewYorkJon34 · 10-24-2011, 05:54 PM

Quote:

Originally Posted by O&G

We used the tranny mount on my custom single turbo build. It's a great upgrade, shifts are smooth and tighter. Vibration is minimal, I don't notice at all! I will be posting a write up about the build soon, look for it!

Was it hard to install?

O&G · 10-24-2011, 05:59 PM

engine and tranny were already out of the car but to answer your question, no, have something to support the tranny and you should be good.

christian370z · 10-25-2011, 02:21 AM

Hmmm, I will definitely be looking into these when I come across some disposable cash haha. How much labor is involved in the installation?

KamiSpeed · 10-27-2011, 05:46 PM

just arrived in store to be shipped internationally... they're good quality and damn sexy haha, if only the engine mounts were actually visible =P

tjaartk · 10-28-2011, 06:18 AM

Great news, I will keep an eye out for the DHL van

KamiSpeed · 11-07-2011, 03:38 PM

check out the new site!!!

KamiSpeed · 11-11-2011, 05:41 PM

only mounts out in the market!!!

4-stroke · 11-12-2011, 12:54 PM

Quote:

Originally Posted by tjaartk

Great news, I will keep an eye out for the DHL van

Any news?

4-stroke · 11-12-2011, 02:53 PM

Quote:

Originally Posted by KamiSpeed

only mounts out in the market!!!

revshift list a urethane 370z mount but so far I can't find anyone who has tried either the revshift parts or these.

tjaartk · 11-26-2011, 05:20 AM

Hi Guys, I had the drop-in engine mounts installed on my SC 370z. Within 10 miles they started self-destructing. By 50 miles they were so bad I had to remove them. See attached picture..

The install was handled by the Nissan Workshop, this was a professional install - they dropped the suspension to install the mounts - 2 hours labour. (and 2 hours again to put back the OEM mounts)

I have contacted Drop-in Engineering for a refund - lets see what happens.

10-21-2011, 05:44 PM	#77 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	To me the trade off was worth it .. Nice response and it takes about 500 miles to fully break in .. Can't wait for the motor mounts .. __________________ Juiced! That is all you need to know !!

10-24-2011, 04:16 PM	#80 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	We used the tranny mount on my custom single turbo build. It's a great upgrade, shifts are smooth and tighter. Vibration is minimal, I don't notice at all! I will be posting a write up about the build soon, look for it! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

10-24-2011, 05:59 PM	#82 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	engine and tranny were already out of the car but to answer your question, no, have something to support the tranny and you should be good. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

10-25-2011, 02:21 AM	#83 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	Hmmm, I will definitely be looking into these when I come across some disposable cash haha. How much labor is involved in the installation? __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

10-27-2011, 05:46 PM	#84 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 25	just arrived in store to be shipped internationally... they're good quality and damn sexy haha, if only the engine mounts were actually visible =P __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

10-28-2011, 06:18 AM	#85 (permalink)
tjaartk Base Member Join Date: Jan 2011 Location: South Africa Posts: 29 Drives: 370Z Rep Power: 14	Great news, I will keep an eye out for the DHL van

11-07-2011, 03:38 PM	#86 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 25	check out the new site!!! __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

11-11-2011, 05:41 PM	#87 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 25	only mounts out in the market!!! __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Solid Motor Mounts	robtrink	Parts for sale (Private Classifieds)	5	08-17-2011 08:39 AM
DIY: Steps to add rear tonneau mounts for those without	TreeSemdyZee	DIY Section (Do-It-Yourself)	9	01-05-2011 02:46 PM
Camber Adjustable Top Mounts On Coilovers	SPOHN	Brakes & Suspension	3	02-28-2010 11:02 AM
Radar Mounts	dainedazz	Audio & Video	4	08-11-2009 08:54 PM