I am thinking about pulling mine out to inspect them to get to my misfire problem, any instructions? Thanks
|
|
LinkBack | Thread Tools | Display Modes |
08-01-2011, 09:55 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Feb 2010
Location: Covington, GA
Age: 45
Posts: 14,844
Drives: Waiting on next Z
Rep Power: 221 |
I've done this several times on my 350 and it looks all to similar on the 370. Just remove the strut bar, upper part of intakes, and the throttle bodies. Unclip the harness from the coilpacks and maybe some PCV hoses also. You will probably have to move parts of the harness to the side to get to the bolts holding the coilbacks in but once those bolts are out just pull the CP's out. After that's removed it's a normal business from there using a spark plug socket. Pretty easy for the avg. car guy. There's nothing really hard about removing the TB's just time.
But if you haven't done the coolant bypass mod then your going to have to remove those lines from the throttle bodies with coolant in them. Shouldn't be too much though just pin those lines back from there sources.
__________________
Last edited by SPOHN; 08-01-2011 at 10:18 PM. |
08-03-2011, 04:56 AM | #6 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251 |
clutch pedal switch? also you needto use a very thin spark plug socket none of mine fit think i used a 14mm deepwell they are NOT normal plugs and are different from the 350 ones with the redesign of the head.
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
08-04-2011, 10:10 PM | #8 (permalink) |
Base Member
Join Date: Mar 2010
Location: Seattle
Posts: 53
Drives: G37S
Rep Power: 15 |
just a small tip for ya - you don't have to completely remove the intake manifold to gain access to the coil packs. i just used a wrench to push it out of the way. +2 about the size of the plugs; they're much smaller than (in my case) my Acura TL's were...
__________________
2010 G37S 6Sedan [4.083 FD||Fast Intentions||GT-Spec||HKS||Injen||Invidia||Osiris] |
08-06-2011, 05:24 AM | #12 (permalink) |
A True Z Fanatic
Join Date: Feb 2011
Location: Newport, NC
Posts: 1,127
Drives: It Hard Till It Pops
Rep Power: 16 |
Is it worth upgrading your spark plugs on a N/A car? Suggestions for brand if so? I remember looking through some threads about F/I and guys were saying the ones that are in the our cars now are already 2 steps colder than most cars so no real need to replace them.
__________________
"Punch" Too much to list and a baby shot of nitrous.... |
08-06-2011, 08:02 AM | #13 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653 |
It cuts engine power to about 20% if it thinks the brakes are applied. If you want to verify this pull the brake light fuse on the drivers floor fuse panel. Obviously you want to test this where there is no traffic
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
08-06-2011, 11:42 AM | #14 (permalink) |
A True Z Fanatic
Join Date: Jun 2009
Location: californee way
Posts: 5,380
Drives: 370, Leaf
Rep Power: 30 |
No I think my problem is fuel, highly doubt it is spark now. Of course I did adjust my brake switch, I had to get in the uncomfortable gumby position to do so.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stock Spark Plugs - heat range? | WarmAndSCSI | Engine & Drivetrain | 19 | 02-16-2017 01:30 PM |
OEM spark plugs life? | IS2000 | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 8 | 12-02-2010 11:36 AM |
Spark Plugs | MichaelM | Nissan 370Z General Discussions | 10 | 11-20-2010 10:07 AM |
Spark plugs. | Chan Chee Hoe | Engine & Drivetrain | 11 | 08-31-2009 09:04 PM |
Ford replacing spark plugs: | frost | Other Vehicles | 15 | 08-09-2009 10:03 PM |