Forged Performance/ OS Giken LSD Review (pics)

ChipsWithDips · 04-23-2011, 08:30 PM

Quote:

Originally Posted by Sharif@Forged

Just to clarify with respect to the installation issues. We're very familiar with Nissan's habit of using different length and shaped stub axles in the various trims of 350Z. With the 370Z, the base model includes traction control but still an open differential. In the process they also elected to use a revised set of stub axles as well. So with 6 different stub axle choices even OS Giken wasn't entirely sure what ones to use. We ordered one short and one long axle in preparation for the installation. Upon inspection of the OEM parts we discovered that we need two SHORT stub axles NON TAPER with snap ring grooves/snap rings. Instead of sending Chris home and ordering a second short stub axle we machined and modified his existing axle to precisely the same measurements and tolerances of the OEM part which including machining a new snap ring groove. This is a substantial amount of extra time, but we didn't charge the customer of any of this and our objective was to complete the job as promised and get him on the road safely. Under normal circumstances no modifications are needed during install. Mission accomplished.

So if I have a base model, I can order 2 short stub shafts from OS Giken and they will fit without modification?

SPOHN · 04-23-2011, 09:41 PM

Quote:

Originally Posted by ChipsWithDips

So if I have a base model, I can order 2 short stub shafts from OS Giken and they will fit without modification?

You have to order them from Nissan.

Sharif@Forged · 04-23-2011, 10:07 PM

Quote:

Originally Posted by ChipsWithDips

So if I have a base model, I can order 2 short stub shafts from OS Giken and they will fit without modification?

The stub axles are a Nissan oem part. You can order them from Ryan or myself and we will make sure you have what you need. It goes without saying you also need two new side bearings.

Belsavis · 05-09-2011, 02:46 PM

Did you replace the side bearings? If so, do you have the part number?
Thanks

SPOHN · 05-09-2011, 02:55 PM

We were planning on it. But being my car had only 2000 miles on it they were in great shape. But with some milage on them it's best to go ahead and replace along with the seals. I'd also look into the Nismo differential cover with the cooling fins. I should of picked one up before I had this installed.

Here's a link for the part number. Which can be had at any dealer. Just confirm with Nissan this is the right part though.

BEARING-DIFFERENTIAL SIDE - 370Z (Z34) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

Sharif@Forged · 05-09-2011, 06:29 PM

Quote:

Originally Posted by Belsavis

Did you replace the side bearings? If so, do you have the part number?
Thanks

Chris is mistaken. We replaced the side bearings as it's not possible to remove them from the old diff without likely damage. We did NOT replace the side seals because they looked perfectly new and had very low miles on them. No reason to change them out.

SPOHN · 05-09-2011, 06:57 PM

Quote:

Originally Posted by Sharif@Forged

Chris is mistaken. We replaced the side bearings as it's not possible to remove them from the old diff without likely damage. We did NOT replace the side seals because they looked perfectly new and had very low miles on them. No reason to change them out.

Guess I had it backwards then.

Belsavis · 05-10-2011, 10:05 AM

Quote:

Originally Posted by Sharif@Forged

Chris is mistaken. We replaced the side bearings as it's not possible to remove them from the old diff without likely damage. We did NOT replace the side seals because they looked perfectly new and had very low miles on them. No reason to change them out.

Thanks guys! Definitely the part I thought it was. I also heard they were pretty tough to get on there.

Ryan@Forged · 05-10-2011, 10:45 AM

Quote:

Originally Posted by Belsavis

Thanks guys! Definitely the part I thought it was. I also heard they were pretty tough to get on there.

Also keep in mind with the OS LSD you will need 2 of the Right Side stub axles, NOT 1 L and 1 R. Oh and yes, they can sometimes be a huge pain to get in there

Belsavis · 05-10-2011, 11:19 AM

Quote:

Originally Posted by Ryan@Forged

Also keep in mind with the OS LSD you will need 2 of the Right Side stub axles, NOT 1 L and 1 R. Oh and yes, they can sometimes be a huge pain to get in there

Right. I'm actually putting a Quaife into my base open diff and it shouldn't require any axle stubs.

cavemancan · 08-20-2012, 10:34 AM

Ok...so let's say you have a Sport model with the factory LSD. Would the OS Giken LSD be a good idea? Would it make that much if a difference? And in that case what parts would I need?

I read everything but it appears the discussion was geared (LOL) towards the no LSD base models.

SPOHN · 08-20-2012, 10:56 AM

Yes it's good to swap to a true LSD over the stock VLSD which isn't great for the true enthusiast who will push the car more beyond DD like lots of spirited driving and defiantly track and auto cross. The stock unit will heat up and basically will act as a open diff like the base model.

The OSG will fit in any model just the base requires different axle stubs.

cavemancan · 08-20-2012, 11:20 AM

Quote:

Originally Posted by SPOHN

The OSG will fit in any model just the base requires different axle stubs.

So I wouldn't need any additional parts like you did? I assume I would need seals etc?

To bad Forged is in GA...too far :/

hughdogz · 02-27-2013, 12:21 PM

SPHON,

I just had the OS Giken super lock installed in my 09 base model.

Did you have any issues with the ABLS (Active Brake Limited Slip) still on? i.e. does it interfere with the clutch LSD operation?

I don't think there is a setting to disable it via UpRev...

dP3NGU1N · 02-27-2013, 01:21 PM

I apologize in advance for my ignorance and since the conversation is already going I thought it appropriate to ask here:

On OSG's website they list the z33/z34 together when you sort them by manufacturer and it mentions it's for the AT only. I have a sport package z34 with MT, is this going to be a problem to install? Am I missing something here? See link below:

Product

Another thing is that I had planned to get some KW v3's with my tax return money, however, I know I'm eventually going to need a proper LSD for the track as well. Which one do you guys think would be the better early buy? I think our stock shocks seem pretty good with sways but I'd like to have more experienced opinions.

Thanks and sorry for the slight thread jack!

05-09-2011, 02:55 PM	#35 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	We were planning on it. But being my car had only 2000 miles on it they were in great shape. But with some milage on them it's best to go ahead and replace along with the seals. I'd also look into the Nismo differential cover with the cooling fins. I should of picked one up before I had this installed. Here's a link for the part number. Which can be had at any dealer. Just confirm with Nissan this is the right part though. BEARING-DIFFERENTIAL SIDE - 370Z (Z34) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com __________________ Last edited by SPOHN; 05-09-2011 at 07:00 PM.

08-20-2012, 10:34 AM	#41 (permalink)
cavemancan Enthusiast Member Join Date: Mar 2012 Location: Miami Posts: 302 Drives: 09 370Z TourSport MT Rep Power: 249	Ok...so let's say you have a Sport model with the factory LSD. Would the OS Giken LSD be a good idea? Would it make that much if a difference? And in that case what parts would I need? I read everything but it appears the discussion was geared (LOL) towards the no LSD base models. shadow85 likes this. __________________ Mazda Rx8 MT Titanium - SOLD! 2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling.

08-20-2012, 10:56 AM	#42 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Yes it's good to swap to a true LSD over the stock VLSD which isn't great for the true enthusiast who will push the car more beyond DD like lots of spirited driving and defiantly track and auto cross. The stock unit will heat up and basically will act as a open diff like the base model. The OSG will fit in any model just the base requires different axle stubs. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: OS Giken Clutches / OS Giken LSD's	Tray@Forged	Drivetrain/Engine	221	04-19-2012 10:51 AM
Forged Performance Dyno Day/Open House Pics	Decker@Forged	Forged Performance	6	07-29-2010 10:02 AM
Forged Performance: Authorized Dealer for iSS Forged Wheels.	Tray@Forged	Forged Performance	4	04-21-2010 09:18 AM
Forged Performance: Nissan GT-R Greddy TT Kit Review and Pics	Tray@Forged	Forged Performance	3	03-31-2010 07:48 PM

05-09-2011, 02:46 PM	#34 (permalink)
Belsavis Base Member Join Date: Jul 2009 Location: Houston, TX Posts: 65 Drives: 09 370Z PG M6 Rep Power: 16	Did you replace the side bearings? If so, do you have the part number? Thanks

02-27-2013, 12:21 PM	#44 (permalink)
hughdogz Base Member Join Date: Oct 2012 Location: Portland, Oregon Posts: 35 Drives: 370Z, 280ZXT, 240Z Rep Power: 13	SPHON, I just had the OS Giken super lock installed in my 09 base model. Did you have any issues with the ABLS (Active Brake Limited Slip) still on? i.e. does it interfere with the clutch LSD operation? I don't think there is a setting to disable it via UpRev...

02-27-2013, 01:21 PM	#45 (permalink)
dP3NGU1N A True Z Fanatic Join Date: Feb 2011 Location: Irvine Posts: 1,682 Drives: 13 PW sport 6mt Rep Power: 18	I apologize in advance for my ignorance and since the conversation is already going I thought it appropriate to ask here: On OSG's website they list the z33/z34 together when you sort them by manufacturer and it mentions it's for the AT only. I have a sport package z34 with MT, is this going to be a problem to install? Am I missing something here? See link below: Product Another thing is that I had planned to get some KW v3's with my tax return money, however, I know I'm eventually going to need a proper LSD for the track as well. Which one do you guys think would be the better early buy? I think our stock shocks seem pretty good with sways but I'd like to have more experienced opinions. Thanks and sorry for the slight thread jack!