Oil cooler thoughts

sig11 · 04-04-2011, 10:45 AM

I will add one more positive for the Z1 kit... no drilling is necessary. There is an optional top bracket (which is probably a good idea) that you have to drill for but otherwise you use existing holes to mount the cooler.

The reason to mount the cooler hoses up is so that the cooler doesn't drain into the oil pan and make your dipstick inaccurate.

flashburn · 04-04-2011, 10:46 AM

Yeah, true, but definitely don't skip drilling for the top bracket if you get the 34 row. They say it's optional (though recommended), but if you are going to be driving this car with any real intentions (i.e. putting that cooler to use!), then you should use that top bracket.

Jose Aliling · 04-04-2011, 10:56 AM

HKS anyone?

sig11 · 04-04-2011, 11:03 AM

Quote:

Originally Posted by flashburn

Yeah, true, but definitely don't skip drilling for the top bracket if you get the 34 row. They say it's optional (though recommended), but if you are going to be driving this car with any real intentions (i.e. putting that cooler to use!), then you should use that top bracket.

Definitely agree. I need to get a drill so I can install my top bracket for my 25 row. It wobbles quite a bit too.

ChrisSlicks · 04-04-2011, 11:05 AM

Quote:

Originally Posted by RCZ

FWIW. I had the Stillen 19 row and that was not enough to keep me comfortable on the track. Switched to a Jnaut hybrid and I haven't seen temps past 220 yet, but I haven't taken it to the track. For my next oil change I'm switching over to a GTM 34row cooler, they have the best price for the biggest core. GTM's 34 row cooler is listed as 13X2X10.25 = 266ci. The Z1 Cooler is listed as 13X1.25X10.25 = 166ci.

The question is...is GTM's core really that much bigger or is there a typo on their website. Can comment on this? GTM?

GTM uses the series 6 Setrab core which are all 2" thick. Z1 uses the series 6 Setrab core as well so it should also be 2" thick, I believe that is just a typo.

I have the 72 row series 1 and if I keep the RPM's above 5k continuously with lots of full throttle then the temperature slowly climbs to 260F after 30 minutes in high ambient temps. If you back off a hair then the temperature stabilizes, if you go up a gear for a lap then the temperature does drop a bit.

RCZ · 04-04-2011, 11:57 AM

Thanks!

Red__Zed · 04-04-2011, 11:59 AM

Quote:

Originally Posted by RCZ

FWIW. I had the Stillen 19 row and that was not enough to keep me comfortable on the track. Switched to a Jnaut hybrid and I haven't seen temps past 220 yet, but I haven't taken it to the track. For my next oil change I'm switching over to a GTM 34row cooler, they have the best price for the biggest core. GTM's 34 row cooler is listed as 13X2X10.25 = 266ci. The Z1 Cooler is listed as 13X1.25X10.25 = 166ci.

The question is...is GTM's core really that much bigger or is there a typo on their website. Can comment on this? GTM?

Was this with the supercharger though?

SPOHN · 04-04-2011, 12:26 PM

Quote:

Originally Posted by flashburn

Yeah, true, but definitely don't skip drilling for the top bracket if you get the 34 row. They say it's optional (though recommended), but if you are going to be driving this car with any real intentions (i.e. putting that cooler to use!), then you should use that top bracket.

I totally agree. If not install it would Now the bracket mounts to a middle bracing on the car. I had to grind out a notch to get the bracket to fit straight being the bracing is sort of like a half "H" design.

RCZ · 04-04-2011, 01:04 PM

Quote:

Originally Posted by Red__Zed

Was this with the supercharger though?

Nope, bolt-ons.

phohman · 04-04-2011, 01:21 PM

I just installed the Z1 25 row cooler w thermostatic adapter. It fits great and easy to follow instructions. The only mod i did was install spacers on the strut stabilizer (nismo only) bracket. Love it!

ZForce · 04-05-2011, 07:35 PM

Good info...subscribed.

StealthZ · 04-07-2011, 08:07 PM

For daily and track I've been usin te AE kit 72 row 1 series. During some daily driving it will hit 160-180 easily even in cold weather and didnt take a freakish amount of time to heat up, and never went over 240 when pushed for 20 minutes in 85 degree weather. Just define what you need it for and go from there. Only other kits I'd go with are 34 row 6 series or 25 row 9 series they essentially have same area and capacity etc.

Dustin@Z1 · 04-12-2011, 03:06 PM

Quote:

Originally Posted by ChrisSlicks

GTM uses the series 6 Setrab core which are all 2" thick. Z1 uses the series 6 Setrab core as well so it should also be 2" thick, I believe that is just a typo....

Yeah thats on me. I do not know where that number came from. Not to split hairs, but the ACTUAL width (as listed by Setrab) is 1.83".

Thanks for pointing that out guys

StealthZ....you must have the core laying on its side if you are running a 72 row?

ChrisSlicks · 04-12-2011, 03:16 PM

Quote:

Originally Posted by Dustin@Z1

StealthZ....you must have the core laying on its side if you are running a 72 row?

Yes the AE kit (which we both have) provides a mounting bracket to lay the unit sideways.

RCZ · 04-12-2011, 03:20 PM

That AE one is the $1000 one right?

04-04-2011, 10:46 AM	#32 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	Yeah, true, but definitely don't skip drilling for the top bracket if you get the 34 row. They say it's optional (though recommended), but if you are going to be driving this car with any real intentions (i.e. putting that cooler to use!), then you should use that top bracket. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

04-04-2011, 10:56 AM	#33 (permalink)
Jose Aliling Enthusiast Member Join Date: Aug 2010 Location: Manila Posts: 298 Drives: tricycle Rep Power: 15	HKS anyone? __________________ http://www.farmofminds.com/2012/10/r...hp-garage.html

04-07-2011, 08:07 PM	#42 (permalink)
StealthZ Enthusiast Member Join Date: Jun 2009 Location: Virginia Posts: 356 Drives: '14 GTR Premium Rep Power: 17	For daily and track I've been usin te AE kit 72 row 1 series. During some daily driving it will hit 160-180 easily even in cold weather and didnt take a freakish amount of time to heat up, and never went over 240 when pushed for 20 minutes in 85 degree weather. Just define what you need it for and go from there. Only other kits I'd go with are 34 row 6 series or 25 row 9 series they essentially have same area and capacity etc. __________________ Past rides: '07 350Z San Marino blue, '09 370z Brilliant silver, '11 Evo X Phantom Black (felt like a brick but did anything) '13 BRZ Satin white (so much fun) now driving the dream.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 06:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 03:27 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 07:32 PM
Thoughts on 09 WRX?	blinkme323	Other Vehicles	14	08-27-2009 03:43 PM
Thoughts/Opinions Please	dainedazz	Exterior & Interior	12	08-23-2009 11:21 AM

04-04-2011, 10:45 AM	#31 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 18	I will add one more positive for the Z1 kit... no drilling is necessary. There is an optional top bracket (which is probably a good idea) that you have to drill for but otherwise you use existing holes to mount the cooler. The reason to mount the cooler hoses up is so that the cooler doesn't drain into the oil pan and make your dipstick inaccurate.

04-04-2011, 11:57 AM	#36 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Thanks!

04-04-2011, 01:21 PM	#40 (permalink)
phohman Base Member Join Date: Feb 2011 Location: Katy-Houston Tx. Age: 62 Posts: 124 Drives: 2012 370Z Nismo Rep Power: 14	I just installed the Z1 25 row cooler w thermostatic adapter. It fits great and easy to follow instructions. The only mod i did was install spacers on the strut stabilizer (nismo only) bracket. Love it!

04-05-2011, 07:35 PM	#41 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Good info...subscribed.

04-12-2011, 03:20 PM	#45 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	That AE one is the $1000 one right?