Semtex, RCZ... What gear on the dyno

DannyGT · 04-11-2009, 12:14 PM

I'm at the dyno with a few friends and going to baseline the Z, what gear?

M.Bonanni · 04-11-2009, 12:52 PM

5th gear

DannyGT · 04-11-2009, 04:29 PM

Well after a great break in period + some warm up pulls I managed to make 282whp and 241wtq three times in a row. Talk about consistency!!!!

Will post graphs later...

semtex · 04-11-2009, 08:37 PM

What kind of dyno?

DannyGT · 04-11-2009, 09:00 PM

DynoJet, started with a 271whp run then ended with 3x 282whp runs...I was happy with that as a base. I'll now have a good base for when all my stuff arrives in ~2weeks.

...and 5th gear was used.

I'll try and get the graphs up tonight if not definitly tomorrow morning.

semtex · 04-11-2009, 09:13 PM

Cool! Yeah 282 isn't bad at all for stock. Not bad at all.

Josh@STILLEN · 04-11-2009, 10:29 PM

282hp sounds like a ringer! Congratulations!

ChrisSlicks · 04-11-2009, 10:54 PM

With some rough conversions that puts you in the 260's on a Dyno Dynamics which would be a great result. Good luck with the mods!

Amon · 04-12-2009, 02:23 AM

Very nice numbers.

I am going to have access to a Mustang Dyno sometime next week and will be seeing what I am pushing with my 7AT base before I start adding mods. How does a Mustang Dyno compare with a DynoJet or Dyno Dynamics?

ChrisSlicks · 04-12-2009, 09:35 AM

Quote:

Originally Posted by Amon

Very nice numbers.

I am going to have access to a Mustang Dyno sometime next week and will be seeing what I am pushing with my 7AT base before I start adding mods. How does a Mustang Dyno compare with a DynoJet or Dyno Dynamics?

It should read less than the DynoJet and higher than the Dyno Dynamics. Low 270's maybe?

RCZ · 04-12-2009, 12:13 PM

The dyno dynamics is going to read like 260WHP. (between 250 and 260)

We did our runs I think in 4th. Doesn't make much of a difference

MarcusMIA · 04-14-2009, 12:41 PM

How did you go through your break-in period?

RCZ · 04-14-2009, 01:05 PM

Who are you asking? me?

Babied it 600 miles. Then I took it to the track.

bullitt5897 · 04-14-2009, 01:59 PM

i had similar numbers and my break in was 800 miles by the book then drove it like a bat out of hell!

DannyGT · 04-14-2009, 02:07 PM

Drove it mildly for 2000 miles, then did the first oil change, then did my first dyno run

04-11-2009, 12:14 PM	#1 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	Semtex, RCZ... What gear on the dyno I'm at the dyno with a few friends and going to baseline the Z, what gear?

04-11-2009, 12:52 PM	#2 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	5th gear __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

04-11-2009, 08:37 PM	#4 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	What kind of dyno? __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

04-11-2009, 09:00 PM	#5 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	DynoJet, started with a 271whp run then ended with 3x 282whp runs...I was happy with that as a base. I'll now have a good base for when all my stuff arrives in ~2weeks. ...and 5th gear was used. I'll try and get the graphs up tonight if not definitly tomorrow morning. Last edited by DannyGT; 04-11-2009 at 09:02 PM.

04-11-2009, 09:13 PM	#6 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	Cool! Yeah 282 isn't bad at all for stock. Not bad at all. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

04-11-2009, 04:29 PM	#3 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	Well after a great break in period + some warm up pulls I managed to make 282whp and 241wtq three times in a row. Talk about consistency!!!! Will post graphs later...

04-11-2009, 10:29 PM	#7 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	282hp sounds like a ringer! Congratulations!

04-11-2009, 10:54 PM	#8 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	With some rough conversions that puts you in the 260's on a Dyno Dynamics which would be a great result. Good luck with the mods!

04-12-2009, 02:23 AM	#9 (permalink)
Amon Base Member Join Date: Apr 2009 Location: Knoxville, TN Posts: 28 Drives: 09 370z Black AT7 Rep Power: 16	Very nice numbers. I am going to have access to a Mustang Dyno sometime next week and will be seeing what I am pushing with my 7AT base before I start adding mods. How does a Mustang Dyno compare with a DynoJet or Dyno Dynamics?

04-12-2009, 12:13 PM	#11 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	The dyno dynamics is going to read like 260WHP. (between 250 and 260) We did our runs I think in 4th. Doesn't make much of a difference Last edited by RCZ; 04-12-2009 at 12:20 PM.

04-14-2009, 12:41 PM	#12 (permalink)
MarcusMIA Base Member Join Date: Mar 2009 Location: Cap Hill, Seattle, WA Posts: 71 Drives: '14 370Z Blk MT Rep Power: 16	How did you go through your break-in period?

04-14-2009, 01:05 PM	#13 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Who are you asking? me? Babied it 600 miles. Then I took it to the track.

04-14-2009, 01:59 PM	#14 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	i had similar numbers and my break in was 800 miles by the book then drove it like a bat out of hell!

04-14-2009, 02:07 PM	#15 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	Drove it mildly for 2000 miles, then did the first oil change, then did my first dyno run

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For the Top Gear fans (Every Episode)	xDIEGOx	The Lounge (Off Topic)	50	09-16-2019 10:40 PM
1st gear noise	rench	Engine & Drivetrain	105	12-21-2012 11:48 PM
first to second gear..	DJcuetip	Nissan 370Z General Discussions	3	02-06-2009 11:42 PM
Top Gear?	370z2	Nissan 370Z General Discussions	1	02-04-2009 12:43 AM
Some favorite top gear videos	AK370Z	The Lounge (Off Topic)	12	11-14-2008 12:00 AM