2011 manual trans question

SPOHN · 02-14-2011, 06:13 PM

^ I notice that with my dads. Even at 80mph.

Johnnu · 02-15-2011, 09:03 AM

When I had my '62 (yes 1962) fuel injected 327 c.i./ 360 HP Vette, I was able to start off from a dead stop in 4th gear.....(had 4:11 gears from the factory). There is no substitute for cubes and HP.... :-)

m4a1mustang · 02-15-2011, 09:20 AM

Oh sweeet! Do you have any pics of the Vette?

Johnnu · 02-16-2011, 10:23 AM

I sure do.... I took me all morning (good thing I just retired) to figure out how to do this so....here goes a try:

Here's one of me and two friends from back in the '60's:

Hope these came out... John N.

Johnnu · 02-16-2011, 10:29 AM

Damn.....don't think it worked....Gonna try another method:

[/IMG]

[/IMG]
One from the 1960's again:

[/IMG]
Last try and I give up...........

Johnnu · 02-16-2011, 10:31 AM

Sorry, like I said....I'M OLD.... Send me your email and I'll send them to you:jonuzx@aol.com

Johnnu · 02-16-2011, 12:05 PM

Gonna try again........

Johnnu · 02-16-2011, 12:08 PM

Looks like I got three out of 5 to work.... I'll take it.... Hope you like it. BTW, that is original paint, chrome etc etc etc.

It had 103,000+ miles when I left in 2007. I'm going to be looking around for something to replace it; if not a new car, maybe another muscle car. John N.

cossie1600 · 02-16-2011, 01:14 PM

Quote:

Originally Posted by m4a1mustang

The 'Vettes are silly.

With the 5.0 under "normal" driving conditions I rarely have the thing above 2,000 RPM

At least the Corvette comes with independent rear suspension

1slow370 · 02-22-2011, 06:22 AM

nice vette but just a minor correction, cubes and horsepower don't mean shat when it comes to what gear you start in. I could start in 6th on a z if i swapped in a 5 horsepower steam piston putting out 130 ft lbs. at 15 rpm, or a 5hp gas engine with 50:1 planetary. It's all about torque and gearing, and i know a 62 vette with a 4 speed t-10 and 4.11's is still geared way the hell lower than a factory z. top speed in a z in 6th is over 200(if you had the power) top speed of a 4.11 62 vette is only 121mph with out going over the redline. in fact the stated top speed for a '62 with a 327/360 of just over 150mph was actually done with an aftermarket 3.27 gearset. So the long and the short of all this is that a '62 vette 4th gear = '09 370z 3rd gear and yes i can start in third

Edit: also the EPA institutes the emissions guidelines not a skip shift, gm came up with the skip shift because without the variable cam timing, and better burn characteristics of say a nissan engine, the current V8's spew monoxide, and nitrogen compounds out the exhaust like nobodies buisness during the shift, and there lucrative use of rubber driveshaft couplers, and weaker driveline components meant that the 1-4 skip shift also extended the life of the driveline with out increasing costs associated with "doing it right"(just like nissan with there F'n lack of an oil cooler saying "no one should be driving like that normally" for an F'n sportscar)

Skeeterbop · 02-22-2011, 10:06 AM

Quote:

Originally Posted by cossie1600

It's based on throttle position too, so you would only get it if you are at let say 20%. With all that said, I did disable mine. Still with the Corvette, you don't really need to shift through all the gears. 1st gear redlines somewhere between 50-60mph, 2nd gear is like 60-80. It's nuts.

Reminds me of the Top Gear review when Clarkson took a C5 Corvette Z06 (i think) from zero to something over 150 all in 5th gear.

m4a1mustang · 02-22-2011, 10:09 AM

Quote:

Originally Posted by Skeeterbop

Reminds me of the Top Gear review when Clarkson took a C5 Corvette Z06 (i think) from zero to something over 150 all in 5th gear.

I thought that was the C6 Z06. 6th gear from 0-170.

Skeeterbop · 02-22-2011, 10:38 AM

I honestly can't remember. I just know he went from a dead stop to 150+, he also beat a trail of gasoline in a 1/4 mile race (not that it really surprised me though).

1slow370 · 02-23-2011, 03:51 AM

z06 in 5th

SeeyaBud86 · 02-24-2011, 06:01 PM

My dad recently purchased a 2011 Z06 with the Z07 package. The Z06 does have the 1st-4th shift mechanism. I have driven it enough to figure out when it happens. If you have the throttle pretty much pinned in 1st it won't force you to shift to 4th. Only if you "drag-out" 1st. If you are driving normally in 1st and go above like 2100rpms the 1 --> 4 light will flash and when you go to shift the car into second, it slides you over into 4th. Its annoying but if you're driving normally it isn't a problem at all. I just shift the car around 2k.

02-14-2011, 06:13 PM	#16 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^ I notice that with my dads. Even at 80mph. __________________

02-15-2011, 09:03 AM	#17 (permalink)
Johnnu Base Member Join Date: Sep 2009 Location: NYS Posts: 12 Drives: Subaru wagon Rep Power: 16	2011 manual trans question When I had my '62 (yes 1962) fuel injected 327 c.i./ 360 HP Vette, I was able to start off from a dead stop in 4th gear.....(had 4:11 gears from the factory). There is no substitute for cubes and HP.... :-)

02-15-2011, 09:20 AM	#18 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Oh sweeet! Do you have any pics of the Vette? __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

02-16-2011, 10:29 AM	#20 (permalink)
Johnnu Base Member Join Date: Sep 2009 Location: NYS Posts: 12 Drives: Subaru wagon Rep Power: 16	Damn.....don't think it worked....Gonna try another method: [/IMG] [/IMG] [/IMG] One from the 1960's again: [/IMG] Last try and I give up...........

02-22-2011, 06:22 AM	#25 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	nice vette but just a minor correction, cubes and horsepower don't mean shat when it comes to what gear you start in. I could start in 6th on a z if i swapped in a 5 horsepower steam piston putting out 130 ft lbs. at 15 rpm, or a 5hp gas engine with 50:1 planetary. It's all about torque and gearing, and i know a 62 vette with a 4 speed t-10 and 4.11's is still geared way the hell lower than a factory z. top speed in a z in 6th is over 200(if you had the power) top speed of a 4.11 62 vette is only 121mph with out going over the redline. in fact the stated top speed for a '62 with a 327/360 of just over 150mph was actually done with an aftermarket 3.27 gearset. So the long and the short of all this is that a '62 vette 4th gear = '09 370z 3rd gear and yes i can start in third Edit: also the EPA institutes the emissions guidelines not a skip shift, gm came up with the skip shift because without the variable cam timing, and better burn characteristics of say a nissan engine, the current V8's spew monoxide, and nitrogen compounds out the exhaust like nobodies buisness during the shift, and there lucrative use of rubber driveshaft couplers, and weaker driveline components meant that the 1-4 skip shift also extended the life of the driveline with out increasing costs associated with "doing it right"(just like nissan with there F'n lack of an oil cooler saying "no one should be driving like that normally" for an F'n sportscar) __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 02-22-2011 at 06:35 AM.

02-16-2011, 10:23 AM	#19 (permalink)
Johnnu Base Member Join Date: Sep 2009 Location: NYS Posts: 12 Drives: Subaru wagon Rep Power: 16	I sure do.... I took me all morning (good thing I just retired) to figure out how to do this so....here goes a try: Here's one of me and two friends from back in the '60's: Hope these came out... John N.

02-16-2011, 10:31 AM	#21 (permalink)
Johnnu Base Member Join Date: Sep 2009 Location: NYS Posts: 12 Drives: Subaru wagon Rep Power: 16	Sorry, like I said....I'M OLD.... Send me your email and I'll send them to you:jonuzx@aol.com

02-16-2011, 12:05 PM	#22 (permalink)
Johnnu Base Member Join Date: Sep 2009 Location: NYS Posts: 12 Drives: Subaru wagon Rep Power: 16	Gonna try again........

02-16-2011, 12:08 PM	#23 (permalink)
Johnnu Base Member Join Date: Sep 2009 Location: NYS Posts: 12 Drives: Subaru wagon Rep Power: 16	Looks like I got three out of 5 to work.... I'll take it.... Hope you like it. BTW, that is original paint, chrome etc etc etc. It had 103,000+ miles when I left in 2007. I'm going to be looking around for something to replace it; if not a new car, maybe another muscle car. John N.

02-22-2011, 10:38 AM	#28 (permalink)
Skeeterbop A True Z Fanatic Join Date: Jan 2011 Location: Fort Bliss, TX Age: 40 Posts: 1,440 Drives: 2011 GM 370 base SP Rep Power: 16	I honestly can't remember. I just know he went from a dead stop to 150+, he also beat a trail of gasoline in a 1/4 mile race (not that it really surprised me though). __________________ Srenity: "Yeah no rest needed to spread the love when your 20 that's for sure...."

02-23-2011, 03:51 AM	#29 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	z06 in 5th __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

02-24-2011, 06:01 PM	#30 (permalink)
SeeyaBud86 Enthusiast Member Join Date: Jun 2009 Location: Naples, FL Posts: 480 Drives: 09 PW 370z 6MT Rep Power: 16	My dad recently purchased a 2011 Z06 with the Z07 package. The Z06 does have the 1st-4th shift mechanism. I have driven it enough to figure out when it happens. If you have the throttle pretty much pinned in 1st it won't force you to shift to 4th. Only if you "drag-out" 1st. If you are driving normally in 1st and go above like 2100rpms the 1 --> 4 light will flash and when you go to shift the car into second, it slides you over into 4th. Its annoying but if you're driving normally it isn't a problem at all. I just shift the car around 2k. __________________ My Z:http://www.the370z.com/members-370z-...l-finally.html 1969 MGB for sale: http://www.the370z.com/other-vehicle...ml#post1238143

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2011 Nav Service Manual	Wrenise	Nissan 370Z Owners Manual / Service Manuals	2	06-16-2012 11:43 AM
2011 Owners Manual	Wrenise	Nissan 370Z Owners Manual / Service Manuals	1	04-25-2011 10:15 PM
question about AT trans	sonic370	Engine & Drivetrain	18	09-04-2010 04:13 AM
Automatic Trans Manual Mode	Finite	Engine & Drivetrain	1	02-24-2009 11:10 PM
Auto Trans dumb question (maybe)	JoeyD	Engine & Drivetrain	12	01-25-2009 11:32 PM