Tranny Issues

NeverBoneStck · 01-05-2011, 12:26 AM

I have a 08 G37 and its been a fun car and has had only minor issues. One of those issues has been my tranny . I had a nasty tin can rattle anytime the car would be idling . I would press in my clutch and it goes away . I know there is some noise associated with this tranny . Infiniti replaced it and the sound is back . The problem is it does not do it all the time and when it does its extremely loud . I want to install my aftermarket clutch but I dont know what this sound is. Any suggestions ??? Thanx !

ImportConvert · 01-05-2011, 01:26 AM

T/O bearing?

NeverBoneStck · 01-05-2011, 02:09 AM

What exactly does the throw out bearing do ??

Trips · 01-05-2011, 02:31 AM

I thought it was the other kind of Trannies??

saber · 01-05-2011, 02:37 AM

the G and Z transmissions are inherently noisy. there's nothing wrong with your car. i've gotten used to mine.

1slow370 · 01-05-2011, 05:33 AM

if its a REALLY loud tin can could be bad clutch chatter and your pressure plate fingers could be bent or misshapen.

also the throw out bearing a little hydraulic cylinder with a bearing on the end of it that pushes the clutch in, when ever the dealer replaces a tranny the manual says they have to change it out so it probably isn't the real problem neither is the tranny unless you are getting two defective ones in a row(witch doesn't really happen). thats why i say i would suspect the clutch and flywheel if it is loud enough. some aftermarket clutches will chatter too just because they aren't dampened like stock ones are

cruzmisl · 01-06-2011, 02:03 PM

Where you at? My car is noisey at idle too.

TypeOne · 01-08-2011, 01:56 AM

My throw out bearing is noisy too... it's the first thing I noticed when I started driving my car. I thought it was abnormal but apparently it isn't.

DOOMMONKEY777 · 01-08-2011, 10:15 PM

Hey umm it can also be the CQC its usually breaks if you press and hold the clutch often you can find a heavy duty one here 350z 370z heavy duty CSC Concentic clutch slave cylinder funny last time i checked it used to be $250 i guess the demand went up. Or maybe if you have some extra $ laying around and you would like to get a lighter flywheel and clutch and and an even better CQC i suggest and i bet every one here would 2, get one of these Z-1 Performance Automotive Services Inc. - ATS Multidisk Clutches 2009 + 370Z (VQ37HR) yeah its a little expensive but if you love you're ride like me you would get one 2.

NeverBoneStck · 01-08-2011, 10:39 PM

Quote:

Originally Posted by cruzmisl

Where you at? My car is noisey at idle too.

Portland .. I live north of the 26 by beaverton....

NeverBoneStck · 01-08-2011, 10:41 PM

Quote:

Originally Posted by 1slow370

if its a REALLY loud tin can could be bad clutch chatter and your pressure plate fingers could be bent or misshapen.

also the throw out bearing a little hydraulic cylinder with a bearing on the end of it that pushes the clutch in, when ever the dealer replaces a tranny the manual says they have to change it out so it probably isn't the real problem neither is the tranny unless you are getting two defective ones in a row(witch doesn't really happen). thats why i say i would suspect the clutch and flywheel if it is loud enough. some aftermarket clutches will chatter too just because they aren't dampened like stock ones are

I called the dealer and they did not replace the throw out bearing ...

daisuke149 · 01-09-2011, 12:05 AM

Quote:

Originally Posted by NeverBoneStck

I called the dealer and they did not replace the throw out bearing ...

thats ****.... i always have it replaced whenever i change the clutch.. then again im a bit crazy.

1slow370 · 01-09-2011, 05:44 AM

no it's in the nissan factory service manual that every time you take the transmission out of the car you NEED to replace the CSC (throwout bearing) they did bad work and didn't follow procedure if they left it in. that's the kind of shop that would take your heads off for work but not replace the vvel sub-assemblies because they are $300 each but they have to be replaced every time they are taken off according to the manual.

01-05-2011, 12:26 AM	#1 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	Tranny Issues I have a 08 G37 and its been a fun car and has had only minor issues. One of those issues has been my tranny . I had a nasty tin can rattle anytime the car would be idling . I would press in my clutch and it goes away . I know there is some noise associated with this tranny . Infiniti replaced it and the sound is back . The problem is it does not do it all the time and when it does its extremely loud . I want to install my aftermarket clutch but I dont know what this sound is. Any suggestions ??? Thanx ! __________________ Juiced! That is all you need to know !! Last edited by NeverBoneStck; 01-05-2011 at 12:42 AM.

01-05-2011, 02:09 AM	#3 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	What exactly does the throw out bearing do ?? __________________ Juiced! That is all you need to know !!

01-05-2011, 02:31 AM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	I thought it was the other kind of Trannies?? __________________

01-05-2011, 02:37 AM	#5 (permalink)
saber chew chew chew Join Date: Jan 2011 Location: West Coast Posts: 1,430 Drives: WRX Rep Power: 25	the G and Z transmissions are inherently noisy. there's nothing wrong with your car. i've gotten used to mine. __________________ 魂の中にある一条の光を信じて

01-05-2011, 05:33 AM	#6 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	if its a REALLY loud tin can could be bad clutch chatter and your pressure plate fingers could be bent or misshapen. also the throw out bearing a little hydraulic cylinder with a bearing on the end of it that pushes the clutch in, when ever the dealer replaces a tranny the manual says they have to change it out so it probably isn't the real problem neither is the tranny unless you are getting two defective ones in a row(witch doesn't really happen). thats why i say i would suspect the clutch and flywheel if it is loud enough. some aftermarket clutches will chatter too just because they aren't dampened like stock ones are __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 01-05-2011 at 05:38 AM.

01-05-2011, 01:26 AM	#2 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7627	T/O bearing?

01-06-2011, 02:03 PM	#7 (permalink)
cruzmisl Base Member Join Date: Feb 2010 Location: Hillsboro, OR Posts: 122 Drives: 08 G37S 6MT Rep Power: 15	Where you at? My car is noisey at idle too.

01-08-2011, 01:56 AM	#8 (permalink)
TypeOne A True Z Fanatic Join Date: Jul 2010 Location: Baton Rouge, LA Posts: 2,682 Drives: BSM 370 Rep Power: 1851	My throw out bearing is noisy too... it's the first thing I noticed when I started driving my car. I thought it was abnormal but apparently it isn't.

01-08-2011, 10:15 PM	#9 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Oct 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 21	Hey umm it can also be the CQC its usually breaks if you press and hold the clutch often you can find a heavy duty one here 350z 370z heavy duty CSC Concentic clutch slave cylinder funny last time i checked it used to be $250 i guess the demand went up. Or maybe if you have some extra $ laying around and you would like to get a lighter flywheel and clutch and and an even better CQC i suggest and i bet every one here would 2, get one of these Z-1 Performance Automotive Services Inc. - ATS Multidisk Clutches 2009 + 370Z (VQ37HR) yeah its a little expensive but if you love you're ride like me you would get one 2. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

01-09-2011, 05:44 AM	#13 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	no it's in the nissan factory service manual that every time you take the transmission out of the car you NEED to replace the CSC (throwout bearing) they did bad work and didn't follow procedure if they left it in. that's the kind of shop that would take your heads off for work but not replace the vvel sub-assemblies because they are $300 each but they have to be replaced every time they are taken off according to the manual. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z vs g37 tranny	zellsexy	Engine & Drivetrain	2	07-30-2010 04:28 PM
Tranny whine	cruzmisl	Engine & Drivetrain	15	07-16-2010 03:32 PM
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ??	Christopher	Nissan 370Z General Discussions	19	10-16-2009 04:55 PM
Initial Z issues that are now non-issues......	cave vulture	Nissan 370Z General Discussions	1	09-06-2009 11:19 PM
Hot Oil? At Least it's Not the GT-R Tranny...	TheWeatherman	Nissan 370Z General Discussions	9	05-19-2009 12:14 PM