Need some help, ASAP on something I noticed today. Had the car at Nissan today getting the Stillen UD crank pulley installed. Prior to getting it installed I had the
|
|
LinkBack | Thread Tools | Display Modes |
10-01-2010, 06:22 PM | #1 (permalink) |
Track Member
Join Date: Mar 2010
Location: Edmonton
Posts: 855
Drives: 10' MB Z34 6MT T/S/N
Rep Power: 22 |
Pulley Wobble
Need some help, ASAP on something I noticed today.
Had the car at Nissan today getting the Stillen UD crank pulley installed. Prior to getting it installed I had the pulley checked for balance at a machine shop who said it was good to go. On the way home, I smelled a bit of oil, but assumed that it was from the oil the tech used to put the pulley on, called nissan and they said to check just to make sure nothing was leaking. So I figured I'd do an oil change that was just about due and check it out at the same time. Good news- no oil leaks around the pulley. (Potentially) Bad News - when i started the engine after the oil change, to make sure nothing was leaking, I had a look at the pulley as well. There is a VERY noticable vibration from side to side and a sound as well. Now having not seen the stock crank pulley spinning i am not sure if this movement is normal, but it just doesnt look right, especially given that all the other pulleys are not vibrating at all. Is this normal for the Stillen UD pulley? If not, what could be causing this? Hopefully no damage was done from the short drive home from nissan. |
10-01-2010, 08:53 PM | #4 (permalink) |
Track Member
Join Date: Mar 2010
Location: Edmonton
Posts: 855
Drives: 10' MB Z34 6MT T/S/N
Rep Power: 22 |
Josh - thanks for the quick response! I am having the Nissan dealer that did the installation check the install tomorrow, getting it towed there just in case. I only drove maybe 20km with the new pulley on, so hopefully nothing happened even if something is wrong.
Based on your response, I would assume that no wobble/vibration is supposed to be present? |
10-01-2010, 09:00 PM | #6 (permalink) | |
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,732
Drives: 🔰
Rep Power: 10 |
Quote:
Sounds like it might of not been tightened to spec? |
|
10-01-2010, 10:23 PM | #7 (permalink) | |
The370Z.com Sponsor
Join Date: Dec 2008
Location: Costa Mesa, CA
Posts: 1,197
Drives: 2004 G35 Coupe 6MT
Rep Power: 534 |
Quote:
But it sounds like you went the extra step, I'm not sure anyone has actually checked our pulleys before installing, but they are CNC milled to exacting tolerances.. lol Hopefully it wasn't something present before the pulley was installed that no one caught.. or maybe thankfully the pulley made someone look.. |
|
10-04-2010, 07:52 PM | #8 (permalink) |
Track Member
Join Date: Mar 2010
Location: Edmonton
Posts: 855
Drives: 10' MB Z34 6MT T/S/N
Rep Power: 22 |
Update -Nissan looked at the car today, the pulled had loosened off to the point where the bolt was finger tight, in addition the crank oil seal was torn and leaking oil. Crank seal was replaced and the stock pulley/belt were reinstalled. Will have to try to get to the bottom of this before I play with the crank pulley again. The installed said the torque was checked twice on the initial installation, so the wobble must be the culprit for loosening off the bolt.
Josh - I bought this pulley off of another member on here who had experienced a similar problem, and took it off. The assumption in that case was incorrect installation, however to have two similar issues with the same pulley is strange. Especially considering I had it checked for balance (because of the issue he had). Any chance of me sending it to you guys for a look/answers? |
10-04-2010, 08:24 PM | #9 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: NY
Posts: 2,391
Drives: No longer a Z
Rep Power: 20 |
I sold him this pulley, Josh, I will call / pm you too.
__________________
09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-) |
10-23-2010, 07:52 PM | #12 (permalink) |
Track Member
Join Date: Jan 2010
Location: Seattle
Posts: 848
Drives: '13 GTI Stage 2 UNI
Rep Power: 16 |
Im not sure if this is an isolated incident or what. I believe there are many who have the stillen UD pulley with no issues. Im staring at mine waiting for my car to get back from the body shop! But i may wait to see if stillen has any input. I would figure by now if any others had this issue they would have said something. If they are on the boards that is.
__________________
2013 Drivers ED GTI | Stage 2 Unitronic |
10-27-2010, 08:30 AM | #13 (permalink) |
Base Member
Join Date: Aug 2009
Location: Queens NY
Posts: 246
Drives: 09 Niss 370Z Blue A7
Rep Power: 16 |
In for an update.
__________________
2009 370z (AT7): Gen3 | HKS Hi Power | Z120BT | Animated Foglight | 590.2x 1999 Maxima SE (MT5): Nada (so far) |
10-27-2010, 07:00 PM | #14 (permalink) |
The370Z.com Sponsor
Join Date: Dec 2008
Location: Costa Mesa, CA
Posts: 1,197
Drives: 2004 G35 Coupe 6MT
Rep Power: 534 |
Whoa, I apologize, I must have missed or didn't get the notices from this thread. Edconline, did you contact our customer service dept regarding this?
And I realize this isn't what you want to hear, but this has all the signs of not being tightened enough on installation. The installation instructions require the pulley be held in place, and initially tightened to 33lb/ft of torque, and then rotated an additional 90 degrees. You mark it with paint, and go to town. For our guys, this takes enough force to have a very long breaker bar, an an additional "floor jack handle" type bar to extend the breaker bar even longer, and it's a bear to get it the full 90 degrees. Without being tight enough, it will loosen itself, and do what you're describing. I'm very glad you caught it in time. Is there paint or some marking on the UD pulley? Were you able to verify the installation? There is no specific torque number they would be checking for, as the installation is based off of degrees of the turn beyond a preset torque spec. |
10-28-2010, 05:07 AM | #15 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251 |
there wouldn't neccesarily be paint on it, dealerships mainly try to use there torque angle gauge, doesn't mean his dealer did though. i would check more to se if there are any large gashes in the pulley from someone incorrectly removing or seating it as that is really the only way to bend one of those things if it is bent.
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Unorthodox Racing Pulley | 370book | Parts for sale (Private Classifieds) | 1 | 09-14-2010 09:08 AM |
stillen underdrive pulley ? | redroadster10 | Engine & Drivetrain | 5 | 04-08-2010 02:54 AM |
Pulley question... | NewlyIMPORTed | Engine & Drivetrain | 4 | 03-16-2010 09:48 PM |
Lightweight pulley Q's | kannibul | Engine & Drivetrain | 3 | 08-31-2009 03:12 PM |
Pulley | >135I | Nissan 370Z General Discussions | 4 | 05-22-2009 05:06 PM |