Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

HEK · 11-22-2015, 03:52 AM

wear and tear??....my 1st brand new 1981 Toyota Celica GT had 330k miles with the same clutch as well as my second brand new 1987 Civic Si with 220k, the rest of my cars were traded with at least 40k on the odometer, bought brand new and all but one were standard transmissions, now if something happens to the Z which again bought it brand new with 80 miles from a dealer as a 2013 leftover in 2014, I guess Mark E.Salomon will be on my quick dial...

OptionZero · 11-22-2015, 09:17 PM

I picked up a used 2015 Nismo and immediately bought the Zspeed HD replacement and a new MC w/ insulated line

How much are people typically spending on labor for this?

axmea? · 11-23-2015, 08:35 AM

Labor rate quotes run between 5 to 6 hours.

njobe89 · 11-23-2015, 10:09 AM

so anywhere from $400 - 600+

just depends on what the shop is charging per hour

mashimello · 11-23-2015, 12:50 PM

Quote:

Originally Posted by OptionZero

I picked up a used 2015 Nismo and immediately bought the Zspeed HD replacement and a new MC w/ insulated line

How much are people typically spending on labor for this?

Payed around 800$ for changing CSC, master cylinder,flywheel, clutch

eastwest2300 · 11-23-2015, 03:11 PM

Quote:

Originally Posted by OptionZero

I picked up a used 2015 Nismo and immediately bought the Zspeed HD replacement and a new MC w/ insulated line

How much are people typically spending on labor for this?

If I remember correctly, I spent about $700 that was everything plus an upgraded clutch & flywheel.

mashimello · 11-23-2015, 03:42 PM

I guess the magic is find the path to the person who has responsibility (cares).
Its obvious Nissan has to recall the slave cylinder or replace it,
but they did the maths and decided otherwise. The only way to object is make this well known - even hit Nissan marketing in Japan. Also if the facebook page gets popular, they will have to act.

HEK · 11-26-2015, 08:33 PM

Quote:

Originally Posted by mashimello

I guess the magic is find the path to the person who has responsibility (cares).
Its obvious Nissan has to recall the slave cylinder or replace it,
but they did the maths and decided otherwise. The only way to object is make this well known - even hit Nissan marketing in Japan. Also if the facebook page gets popular, they will have to act.

I see this as numbers, there are s few Z's at least in my neck of the woods that why bother to recall "all" manuals"..let us bring our broken horses to Nissan and they will claim we did it ourselves since we beat on our Z's. I will subscribe to this topic and will bring it up to the dealer the last day my warranty expires and ask the manager where do I stand....I will too lawyer up and have record of this ordeal others are going thru...no worries...

Rnchdude · 12-03-2015, 12:06 AM

Aw, crap, my "new to Me" 2012 Roadster with 10K miles just had clutch fail. It's gonna take me all night to read 96 pages on this thread! LOL

Dropped at Sacramento Nissan today. Pray for me that I got a service guy/dealership who won't make me jump thru hoops to get it fixed right. Sigh....

HulaGirl · 12-03-2015, 02:08 PM

Quote:

Originally Posted by mashimello

I guess the magic is find the path to the person who has responsibility (cares).
Its obvious Nissan has to recall the slave cylinder or replace it,
but they did the maths and decided otherwise. The only way to object is make this well known - even hit Nissan marketing in Japan. Also if the facebook page gets popular, they will have to act.

Facebook Page? Name? Link? TIA.

clou · 12-05-2015, 10:56 AM

Add me to the list now - just over 5100 KM/3200 miles and dealer confirmed CSC is gone. Going in to get a loaner car today and to see if I can get a Zspeed installed instead.

eastwest2300 · 12-05-2015, 05:32 PM

sorry bro

HulaGirl · 12-06-2015, 03:58 PM

Quote:

Originally Posted by clou

Add me to the list now - just over 5100 KM/3200 miles and dealer confirmed CSC is gone. Going in to get a loaner car today and to see if I can get a Zspeed installed instead.

Sorry to see your news about CSC.

Jsolo · 12-07-2015, 06:56 PM

I think the loose flywheel is a result of improper installation. The leaky csc is due to failed part (poor design).

I suppose on the plus side, you're lucky the loose flywheel didn't do additional engine/trans damage. For example, every time the engine loads and unloads, it would knock. Hear any strange noises before?

TurboNeon185 · 12-09-2015, 09:48 AM

Throw me on the list. 09 Touring with 41k on the clock. My question is how long will the stock clutch last? I doubt I'll have this car past 70-80k. Will the stock clutch last that long? I'm just trying to decide whether to change the clutch when I change the CSC or save the cash and leave the stocker in there.

11-23-2015, 08:35 AM	#1428 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	Labor rate quotes run between 5 to 6 hours. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 11-23-2015 at 08:37 AM.

11-23-2015, 10:09 AM	#1429 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174284	so anywhere from $400 - 600+ just depends on what the shop is charging per hour __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

11-23-2015, 03:42 PM	#1432 (permalink)
mashimello Base Member Join Date: Jan 2015 Location: Fremont Posts: 75 Drives: 370z roadster Rep Power: 27	I guess the magic is find the path to the person who has responsibility (cares). Its obvious Nissan has to recall the slave cylinder or replace it, but they did the maths and decided otherwise. The only way to object is make this well known - even hit Nissan marketing in Japan. Also if the facebook page gets popular, they will have to act. Snow dog and ramoszx12r like this.

12-05-2015, 05:32 PM	#1437 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,987 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	sorry bro __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-07-2015, 06:56 PM	#1439 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 15	I think the loose flywheel is a result of improper installation. The leaky csc is due to failed part (poor design). I suppose on the plus side, you're lucky the loose flywheel didn't do additional engine/trans damage. For example, every time the engine loads and unloads, it would knock. Hear any strange noises before? __________________ G37S Sedan 6MT, Eibach swaybars, Invidia Exhaust, Weaker Clutch Pedal Spring For sale links

11-22-2015, 03:52 AM	#1426 (permalink)
HEK Enthusiast Member Join Date: Apr 2009 Location: WESTFIELD, MA Age: 66 Posts: 491 Drives: '13 Z Tour Sports 6m Rep Power: 660	wear and tear??....my 1st brand new 1981 Toyota Celica GT had 330k miles with the same clutch as well as my second brand new 1987 Civic Si with 220k, the rest of my cars were traded with at least 40k on the odometer, bought brand new and all but one were standard transmissions, now if something happens to the Z which again bought it brand new with 80 miles from a dealer as a 2013 leftover in 2014, I guess Mark E.Salomon will be on my quick dial...

11-22-2015, 09:17 PM	#1427 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I picked up a used 2015 Nismo and immediately bought the Zspeed HD replacement and a new MC w/ insulated line How much are people typically spending on labor for this?

12-03-2015, 12:06 AM	#1434 (permalink)
Rnchdude Base Member Join Date: Oct 2015 Location: NorCal Sacramento Posts: 34 Drives: 12 370Z 6M Roadster Rep Power: 10	Aw, crap, my "new to Me" 2012 Roadster with 10K miles just had clutch fail. It's gonna take me all night to read 96 pages on this thread! LOL Dropped at Sacramento Nissan today. Pray for me that I got a service guy/dealership who won't make me jump thru hoops to get it fixed right. Sigh....

12-05-2015, 10:56 AM	#1436 (permalink)
clou Base Member Join Date: Jun 2015 Location: Vancouver, BC Posts: 4 Drives: 16 Nissan 370z PW M6 Rep Power: 10	Add me to the list now - just over 5100 KM/3200 miles and dealer confirmed CSC is gone. Going in to get a loaner car today and to see if I can get a Zspeed installed instead.

12-09-2015, 09:48 AM	#1440 (permalink)
TurboNeon185 Base Member Join Date: Apr 2012 Location: South Jersey Posts: 9 Drives: 09 370z M6, 05 SRT4 Rep Power: 13	Throw me on the list. 09 Touring with 41k on the clock. My question is how long will the stock clutch last? I doubt I'll have this car past 70-80k. Will the stock clutch last that long? I'm just trying to decide whether to change the clutch when I change the CSC or save the cash and leave the stocker in there. Last edited by TurboNeon185; 12-09-2015 at 09:51 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 08:35 AM
Sticky: 370Z Transmission Failures (6MT)	DIGItonium	Engine & Drivetrain	104	02-25-2021 11:19 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 09:10 AM
CSC Acting UP? Sticky Clutch captured on video.. help?	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-23-2011 10:33 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 08:03 AM