Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

Originally Posted by eastwest2300

If there was any chance you could make it out here in Maryland.. There's AAM, they do excellent work, you'd be in and out in about a day.

Originally Posted by Read T

Model 2011 Nissan 370z Sport
VIN Top Secret
Purchase date April 2012
Occurrence date July 2015
Mileage 58,000

About a year ago my clutch PEDAL broke, shearing off the helper spring mount. The pedal became very sloppy and difficult to shift but I replaced it with the RJM adjustable pedal and was very pleased with the results. Thanks to this website though I have since known to keep a close eye out for any CSC issues.

The car is my daily driver and I generally baby the car around town, although I have been to a few HPDEs with it. I currently run PFC 665 for the clutch line.Two weeks ago while changing my engine oil, I noticed that the Clutch reservoir fluid level was getting very low . Prior to this, I had not had any problems with the clutch line and had it flushed at least once before. No puddles or leaks were noticed under the car or on the bottom of the transmission. I ordered the ZSpeed CSC and parked my car for a week (make sure you have a spare car if you own a nissan or anything British).

I am lucky enough to have a good friend that owns a shop with a lift, and today the two of us swapped out the CSC. The entire procedure took roughly 3 hours, and was made much easier by slightly dropping the front subframe to help tilt the transmission down. The clutch disc was noted to be plenty thick still - which is great since I didn't order a new one. Car is now doing great although the engagement point is slightly lower and grabbier, two things I can adjust with the RJM pedal.

Before I did the work myself I went to a Z shop locally and was quoted roughly $950 labour + parts. I ended up doing it myself with a friend for the price of the CSC and a few good beers (Dogfish Head, Aviator, and DuClaw).

As much as I love this car, I will say that I have been pretty disappointed by the build quality and random issues I've had - breaking clutch pedal, CSC failure, axle click, engine oil overheating, and clear coat bubbling off all over.

Originally Posted by firulice

Crazy stuff. Nissan needs to get their act together. I might do mine on a lift (ordered one today) so it's good to hear it's not too bad. Did you use the how-to from the forum here? Any other tips? I'll have to hit you up on how to lower the subframe.

Originally Posted by zmanelite

Yay my CSC went out today mid canyon drive
I was able to limp it home , I ordered stage 2 clutch , flywheel , master and csc from Z1

Originally Posted by FairladyZ10PG

Sorry to hear....

I'm amazed you were able to drive it back home. I had to have mine towed

Originally Posted by zmanelite

Yay my CSC went out today mid canyon drive
I was able to limp it home , I ordered stage 2 clutch , flywheel , master and csc from Z1

Originally Posted by KoolKarmaJoe

Which brand/weight Flywheel did you choose?

Sent from my XT1254 using Tapatalk

Originally Posted by zmanelite

The pedal hit the floor so I pulled it back up , I checked the fluid and it didn't look like I lost any
After the car sat for a bit and cooled the pedal had a little bit of pressure, I put the car in second gear and pressed the clutch in and pushed the start button
The car lurched forward and started walking due to the starter , the car turned on and I took off
I shifted to 3rd no clutch and got onto the hwy , after a few miles and the oil temp went down I checked the pedal asnd had about 75% of pressure , that was good enough to get me home

That could not have been fun

I'm gonna change tranny fluids while the clutch gets changed
From what ive readf Motul 300ls for maual tranny and rear diff is the way to go
Any other oils I should look at ?

Originally Posted by SerialCoderer

So my car came back from the dealer these are the things they claimed are needed

Part#
30205-JK40c - Cover Assy-Clutch 787.89
306A1-JK40d - Cyl Assy - Conc 183.50
12310-EY00A - Flywheel Assy 1084.32

everything with labor $3500


I do not trust they have actually figured out the problem after reading everyone else's story on here that has experienced the clutch pedal losing pressure and going to the floor. I still think my best option is to get rid of this car. I have had way to many issues (2 engines, etc, smh) with this car and I bought it fairly new 7k miles currently at 42k.

Originally Posted by schellingr

Yeah, If you haven't complaint on the Nissan Facebook page go ahead and do that. Also put a complaint under the File a NHTSA Complaint (Link on the first post of this thread)

Originally Posted by zmanelite

I actually bought this kit Thursday off BlkNismoon the board
Southbend Clutch kit///DXD Black 24 lbs steel flywheel ///HD CSC

It's not super light Flywheel but better than stock plus I got it for a good price so that was a plus

I was gonna change it before I had any problems and low a behold today it facked up , good timing I guess

Originally Posted by zmanelite

I actually bought this kit Thursday off BlkNismo on the board
Southbend Clutch kit///DXD Black 24 lbs steel flywheel ///HD CSC

It's not super light Flywheel but better than stock plus I got it for a good price so that was a plus

I was gonna change it before I had any problems and low a behold today it facked up , good timing I guess

Originally Posted by KoolKarmaJoe

Southbend puts out a good clutch kit. I went with the ACT HDSS clutch kit with a ACT Streetlite Flywheel 19lbs. I happy with it. It did require a 300-500 mile break-in period. Luckily I have not experienced any Flywheel chatter.

Sent from my XT1254 using Tapatalk