Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

MagmaRed370z · 06-25-2015, 08:09 PM

We should also create an Instagram page advising of this issue. The more social media the better I think.

TrainWreck · 06-25-2015, 08:44 PM

Thought I would share my experience with this issue.

2009 - 49k miles - out of warranty - Central NJ

Day 0: Clutch pedal not returning all the way up.
Day 1: Car won't go into gear. Notice clutch fluid reservoir is dry.
Day 3: Refill fluid and drive to dealer. Hopeful that the flush and GTR fluid from the TSB might save me money. Still was a rip off - $320 for parts + labor. Clutch barely makes it back home. Read this thread.
Day 4: Order OEM clutch (disc + cover), OEM master, Zspeed HD CSC. All from Zspeed.
Day 6: Parts arrive.
Day 8: Car towed to private repair shop. 17 miles away, I didn't want to chance driving it. After showing up 2 hours late, we get the car on the flat bed tow truck. Tow truck blows a tire about 1 mile from my house. It was a long day :-(
Day 10: Back on the road.

Parts ~1070 (incl'd shipping)
Labor ~900 (incl'd tax)

Dealer wanted almost $4,000 (!!!!) which, granted, included new OEM (dual mass) flywheel - but god damn they are a rip off.

Zbrah · 06-25-2015, 09:03 PM

Quote:

Originally Posted by schellingr

We should also create an Instagram page advising of this issue. The more social media the better I think.

For anyone capable of using Instagrams/Twitters etc...PLEASE do!! We need the joint effort of the community to take this fight straight to Nissan. A few guys can only do so much! We need everyone's help and getting involved

Zbrah · 06-25-2015, 09:05 PM

Quote:

Originally Posted by TrainWreck

Thought I would share my experience with this issue.

2009 - 49k miles - out of warranty - Central NJ

Day 0: Clutch pedal not returning all the way up.
Day 1: Car won't go into gear. Notice clutch fluid reservoir is dry.
Day 3: Refill fluid and drive to dealer. Hopeful that the flush and GTR fluid from the TSB might save me money. Still was a rip off - $320 for parts + labor. Clutch barely makes it back home. Read this thread.
Day 4: Order OEM clutch (disc + cover), OEM master, Zspeed HD CSC. All from Zspeed.
Day 6: Parts arrive.
Day 8: Car towed to private repair shop. 17 miles away, I didn't want to chance driving it. After showing up 2 hours late, we get the car on the flat bed tow truck. Tow truck blows a tire about 1 mile from my house. It was a long day :-(
Day 10: Back on the road.

Parts ~1070 (incl'd shipping)
Labor ~900 (incl'd tax)

Dealer wanted almost $4,000 (!!!!) which, granted, included new OEM (dual mass) flywheel - but god damn they are a rip off.

Please share your complaint with the NHTSA via the link below. Thank you!!

https://www-odi.nhtsa.dot.gov/ivoq/

MagmaRed370z · 06-25-2015, 10:44 PM

So for the people that want to fix this issue even if the CSC has NOT failed. What is what we have to replace/buy in order to avoid this whole CSC issue? Just replace the CSC with the Zspeed CSC? that's it?

Is this the part?---> http://www.zspeedperformance.com/ZSp...SC-zsp2006.htm

Thanks in advance.

Zbrah · 06-25-2015, 11:10 PM

^Yep, replace with the HD CSC AND your oem master cylinder at the same time to prevent future problem.

MagmaRed370z · 06-25-2015, 11:14 PM

Quote:

Originally Posted by Zbrah

^Yep, replace with the HD CSC AND your oem master cylinder at the same time to prevent future problem.

Does the Master Cylinder needs to be Zspeed as well or just OEM?

nizmo19 · 06-25-2015, 11:32 PM

Ok looking for some opinions. Recently my clutch has been making a grinding noise just before engaging fully in 1st and 2nd gear. I took it to a shop and they said sounds like throw-out bearing. I believe we have the CSC instead of a traditional throw out bearing. Has anyone seen this symptom of the CSC failing or could it be something else? Thanks in advance.

Zbrah · 06-26-2015, 12:43 AM

Quote:

Originally Posted by schellingr

Does the Master Cylinder needs to be Zspeed as well or just OEM?

There isn't an aftermarket master cylinder availlable that I'm aware of. People are replacing the oem master with a new one while the tranny is out.

jwick · 06-26-2015, 09:19 AM

Quote:

Originally Posted by Zbrah

There isn't an aftermarket master cylinder availlable that I'm aware of. People are replacing the oem master with a new one while the tranny is out.

This

If you don't replace the CMC at the time of the clutch swap, you'll be back to do it later. The seals in the OEM one aren't the greatest so make sure not to use a power bleeder.

KoolKarmaJoe · 06-26-2015, 10:04 AM

Quote:

Originally Posted by jwick

This

If you don't replace the CMC at the time of the clutch swap, you'll be back to do it later. The seals in the OEM one aren't the greatest so make sure not to use a power bleeder.

Wow! "...The seals in OEM CMC aren't the greatest either". What was Nissan thinking when they designed this car? The Z is starting to remind me of my first car in high school, a OPEL GT. It too had crap parts! I'm beginning to regret trading in my old Suburu WRX STI for this "all looks & no reliability car".

DIGItonium · 06-26-2015, 10:33 AM

My master cylinder might be showing some signs. It's making a loud squeaky noise whenever I depress the pedal. That CMC is another weak point. I had it replaced twice. The original was replaced when it failed after installing the new clutch and CSC at 22k miles. The second one was replaced for the sake of safety when I had clutch issues.

eastwest2300 · 06-26-2015, 01:21 PM

Its shocking that some of these cars with a little over 1000 miles are having these problems.. its crazy. And to these folks replacing a bad CSC with another OEM CSC is just silly.. just my opinion.

KoolKarmaJoe · 06-26-2015, 01:24 PM

Quote:

Originally Posted by eastwest2300

Its shocking that some of these cars with a little over 1000 miles are having these problems.. its crazy. And to these folks replacing a bad CSC with another OEM CSC is just silly.. just my opinion.

I agree.

Sent from my XT1254 using Tapatalk

MagmaRed370z · 06-26-2015, 01:36 PM

so basically to avoid the problem:

1) Replace the OEM CSC with the Zspeed CSC.
2) Replace the existing CMC with a new OEM CMC.

Replace those two and it should be fine or does something else needs to be replaced?

06-25-2015, 08:09 PM	#736 (permalink)
MagmaRed370z A True Z Fanatic Join Date: Jun 2014 Location: USA Posts: 1,468 Drives: 14' 370z Sport Magma Rep Power: 13	We should also create an Instagram page advising of this issue. The more social media the better I think. Zbrah likes this.

06-25-2015, 10:44 PM	#740 (permalink)
MagmaRed370z A True Z Fanatic Join Date: Jun 2014 Location: USA Posts: 1,468 Drives: 14' 370z Sport Magma Rep Power: 13	So for the people that want to fix this issue even if the CSC has NOT failed. What is what we have to replace/buy in order to avoid this whole CSC issue? Just replace the CSC with the Zspeed CSC? that's it? Is this the part?---> http://www.zspeedperformance.com/ZSp...SC-zsp2006.htm Thanks in advance. Last edited by MagmaRed370z; 06-25-2015 at 10:46 PM.

06-25-2015, 11:10 PM	#741 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	^Yep, replace with the HD CSC AND your oem master cylinder at the same time to prevent future problem. __________________

06-26-2015, 10:33 AM	#747 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	My master cylinder might be showing some signs. It's making a loud squeaky noise whenever I depress the pedal. That CMC is another weak point. I had it replaced twice. The original was replaced when it failed after installing the new clutch and CSC at 22k miles. The second one was replaced for the sake of safety when I had clutch issues. __________________

06-26-2015, 01:21 PM	#748 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Its shocking that some of these cars with a little over 1000 miles are having these problems.. its crazy. And to these folks replacing a bad CSC with another OEM CSC is just silly.. just my opinion. MagmaRed370z and KoolKarmaJoe like this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

06-25-2015, 11:32 PM	#743 (permalink)
nizmo19 Base Member Join Date: Feb 2015 Location: Mass Posts: 12 Drives: 09 PW Nismo Rep Power: 10	Ok looking for some opinions. Recently my clutch has been making a grinding noise just before engaging fully in 1st and 2nd gear. I took it to a shop and they said sounds like throw-out bearing. I believe we have the CSC instead of a traditional throw out bearing. Has anyone seen this symptom of the CSC failing or could it be something else? Thanks in advance.

06-26-2015, 01:36 PM	#750 (permalink)
MagmaRed370z A True Z Fanatic Join Date: Jun 2014 Location: USA Posts: 1,468 Drives: 14' 370z Sport Magma Rep Power: 13	so basically to avoid the problem: 1) Replace the OEM CSC with the Zspeed CSC. 2) Replace the existing CMC with a new OEM CMC. Replace those two and it should be fine or does something else needs to be replaced?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 08:35 AM
Sticky: 370Z Transmission Failures (6MT)	DIGItonium	Engine & Drivetrain	104	02-25-2021 11:19 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 09:10 AM
CSC Acting UP? Sticky Clutch captured on video.. help?	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-23-2011 10:33 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 08:03 AM