Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

MagmaRed370z · 07-08-2015, 08:13 PM

Quote:

Originally Posted by KoolKarmaJoe

Dam! I really luv Z's, but Nissan Corporate sucks! I would advise others against buying any Nissan

Sent from my XT1254 using Tapatalk

This really sucks big time. I wish I had lots of disposable income to hire lawyers, all kind of media including articles in the top 10 car magazines, TV, radio, newspapers and propaganda about this sh*t.

Sorry and rant over.

Anifaust · 07-09-2015, 12:38 AM

Quote:

Originally Posted by firulice

Sucks man. So what now? Are putting an HD CSC in? anything else?

Yeah, gonna go ahead and replace the clutch and CSC. Still waiting on them to give me a quote on what they've done so far and parts they want to order. If I can find them cheaper he said do it. Gonna order the Zspeed tomorrow. He also has some neat heat-restraining kevlar wrap we're going to lock down around the pipes instead of buying the 40$ braided line for the CSC.

Magic Bus · 07-09-2015, 02:32 AM

Just curious, as I check my fluids on a regular basis. How many of you had the CSC failure when your trans fluid was clear?

KoolKarmaJoe · 07-09-2015, 07:28 AM

Quote:

Originally Posted by Magic Bus

Just curious, as I check my fluids on a regular basis. How many of you had the CSC failure when your trans fluid was clear?

Mine was clear in reservoir at time of failure. But when I went to bleed CLUTCH hydraulics under car black fluid with black particles came out. When the CSC or CMC breaks its best to replace both parts & flush system to get any residual gunk out, just my opinion. I took advise from many others, & upgraded to a HD CSC and currently use GTR Fluid. I did replace CMC, clutch line, added new ACT Performance CLUTCH kit & ACT Streetlite Flywheel but that was done to improve performance & take advantage of down time due to broken CSC.

Sent from my XT1254 using Tapatalk

eastwest2300 · 07-09-2015, 01:18 PM

Quote:

Originally Posted by Anifaust

Yeah, gonna go ahead and replace the clutch and CSC. Still waiting on them to give me a quote on what they've done so far and parts they want to order. If I can find them cheaper he said do it. Gonna order the Zspeed tomorrow. He also has some neat heat-restraining kevlar wrap we're going to lock down around the pipes instead of buying the 40$ braided line for the CSC.

Im gonna order my fluids today... I have all the parts to upgrade the CSC/CMC, clutch & flywheel but no fluids.

KoolKarmaJoe · 07-09-2015, 01:30 PM

Quote:

Originally Posted by eastwest2300

Im gonna order my fluids today... I have all the parts to upgrade the CSC/CMC, clutch & flywheel but no fluids.

Definitely upgrade fluids. Joe (ZSpeed) 100% correct with draining trans & replacing with MOTUL Gear Oil (74.00 = 4qts). Extremely pleased with kit & flywheel . A very noticeable improvement in performance. Much more responsive. Haven't really got on it too hard as ACT Clutch Kit recommends 300-500 mile break-in before racing.

Sent from my XT1254 using Tapatalk

ShutokuZ · 07-09-2015, 02:07 PM

I love the ACT HDSS kit with their Streetlite FW. I used them on my Evo IX and it held up great with Auto-X.

KoolKarmaJoe · 07-09-2015, 02:11 PM

Quote:

Originally Posted by ShutokuZ

I love the ACT HDSS kit with their Streetlite FW. I used them on my Evo IX and it held up great with Auto-X.

I just got my Z back from AAM Competition yesterday. Took off from work today to drive around & "break it in". I'm very pleased with it. Pedal is a little stiffer than OEM clutch but still easy to drive in city stop-n-go traffic.

Sent from my XT1254 using Tapatalk

eastwest2300 · 07-09-2015, 02:31 PM

Quote:

Originally Posted by KoolKarmaJoe

I just got my Z back from AAM Competition yesterday. Took off from work today to drive around & "break it in". I'm very pleased with it. Pedal is a little stiffer than OEM clutch but still easy to drive in city stop-n-go traffic.

Sent from my XT1254 using Tapatalk

what was the turn around time for the install?

KoolKarmaJoe · 07-09-2015, 02:46 PM

Quote:

Originally Posted by eastwest2300

what was the turn around time for the install?

It was towed to AAM on Tuesday 7/7/2015. We arrived at 10:00am. Markus called me Wednesday 7/8/2015 at 4:45pm, "Joe your Z is ready!". Awesome! You may find cheaper places to go installation, but no way will you match the turn around & quality work of AAM Competition. Plus MAZOC Discounts on labor. Do you have MAZOC card? If so, bring it. Work Order - Install ACT HDSS Clutch Kit(Clutch plate/Pressure Plate, pilot bearing), Install ACT Streetlite Flywheel, Flush Trans & put in MOTUL Gear Oil, install HD CSC, install CMC, install insulated clutchline, flush clutch hydraulics & put in GTR Fluid.

Sent from my XT1254 using Tapatalk

eastwest2300 · 07-09-2015, 03:04 PM

Quote:

Originally Posted by KoolKarmaJoe

It was towed to AAM on Tuesday 7/7/2015. We arrived at 10:00am. Markus called me Wednesday 7/8/2015 at 4:45pm, "Joe your Z is ready!". Awesome! You may find cheaper places to go installation, but no way will you match the turn around & quality work of AAM Competition. Plus MAZOC Discounts on labor. Do you have MAZOC card? If so, bring it.

Sent from my XT1254 using Tapatalk

That is really fast.. good stuff man.

KoolKarmaJoe · 07-09-2015, 03:10 PM

Quote:

Originally Posted by eastwest2300

That is really fast.. good stuff man.

AAM Competition is a quality shop, carries/makes quality products. Their prices reflect their quality in parts/labor/ and work ethics. I'm a loyal customer of AAM Competition. I highly recommend them.

eastwest2300 · 07-09-2015, 03:21 PM

Quote:

Originally Posted by KoolKarmaJoe

AAM Competition is a quality shop, carries/makes quality products. Their prices reflect their quality in parts/labor/ and work ethics. I'm a loyal customer of AAM Competition. I highly recommend them.

And they have an excellent open house every year...

Magic Bus · 07-09-2015, 05:20 PM

Quote:

Originally Posted by KoolKarmaJoe

Mine was clear in reservoir at time of failure. But when I went to bleed CLUTCH hydraulics under car black fluid with black particles came out. When the CSC or CMC breaks its best to replace both parts & flush system to get any residual gunk out, just my opinion. I took advise from many others, & upgraded to a HD CSC and currently use GTR Fluid. I did replace CMC, clutch line, added new ACT Performance CLUTCH kit & ACT Streetlite Flywheel but that was done to improve performance & take advantage of down time due to broken CSC.

Sent from my XT1254 using Tapatalk

KoolKarmaJoe, Mahalo for the info. I guess when it comes to the CSC, clear fluid doesn't mean much, when it wants to go it just goes.

ShutokuZ · 07-09-2015, 05:45 PM

And from my small sample experience, dark or dirty fluid doesn't mean it is going either. Mine was really dark, but the removed CSC (non failure removal) looked in good shape. So I guess a drop in fluid in the reservoir and the loss of clutch are the only real indicators.

07-09-2015, 02:07 PM	#907 (permalink)
ShutokuZ Track Member Join Date: Oct 2012 Location: Honolulu Posts: 512 Drives: 2013 PW 6MT Sport Rep Power: 14	I love the ACT HDSS kit with their Streetlite FW. I used them on my Evo IX and it held up great with Auto-X. KoolKarmaJoe likes this.

07-09-2015, 05:45 PM	#915 (permalink)
ShutokuZ Track Member Join Date: Oct 2012 Location: Honolulu Posts: 512 Drives: 2013 PW 6MT Sport Rep Power: 14	And from my small sample experience, dark or dirty fluid doesn't mean it is going either. Mine was really dark, but the removed CSC (non failure removal) looked in good shape. So I guess a drop in fluid in the reservoir and the loss of clutch are the only real indicators. Magic Bus likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 08:35 AM
Sticky: 370Z Transmission Failures (6MT)	DIGItonium	Engine & Drivetrain	104	02-25-2021 11:19 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 09:10 AM
CSC Acting UP? Sticky Clutch captured on video.. help?	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-23-2011 10:33 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 08:03 AM

07-09-2015, 02:32 AM	#903 (permalink)
Magic Bus A True Z Fanatic Join Date: May 2012 Location: Honolulu Posts: 1,427 Drives: 17 6MT M2 Rep Power: 18754	Just curious, as I check my fluids on a regular basis. How many of you had the CSC failure when your trans fluid was clear?