High capacity oil pan or GTM oil pan spacer?

Elia Cid · 08-14-2010, 10:19 AM

High capacity oil pan or oil pan spacer, which is best?
Will it hang to low under the car and can the black plastic shield go back on with a oil pan spacer or high capacity oil pan?
Thanks,
Alex

wishihadnav · 08-17-2010, 01:33 PM

personally id go with the oil pan..a spacer will sit the pan about an inch lower..currently i think arc is the only one out there making a pan however its $$$..

Elia Cid · 08-17-2010, 03:37 PM

Quote:

Originally Posted by wishihadnav

personally id go with the oil pan..a spacer will sit the pan about an inch lower..currently i think arc is the only one out there making a pan however its $$$..

Do you know if you can put back on the plastic black shield once the pan is installed?

Thanks,

Alex

BGTV8 · 08-17-2010, 05:54 PM

I have a JWT sump spacer - and there is no problem refitting the under-engine plastic shroud .........

Elia Cid · 08-17-2010, 06:32 PM

Quote:

Originally Posted by BGTV8

I have a JWT sump spacer - and there is no problem refitting the under-engine plastic shroud .........

Thanks good to know

Alex

LateralG'z · 08-17-2010, 10:36 PM

I have the GTM oil spacer and everything fits good

Elia Cid · 08-18-2010, 09:52 AM

Quote:

Originally Posted by LateralG'z

I have the GTM oil spacer and everything fits good

Looks like a nice product as do most of the GTM products.

Thanks,
Alex

NewYorkJon34 · 05-20-2011, 01:01 AM

do you just put an extra quart of oil when doing oil changes with the gtm spacer?

Trips · 05-20-2011, 01:10 AM

Why not spend that money towards an oil cooler?

08-14-2010, 10:19 AM	#1 (permalink)
Elia Cid Base Member Join Date: Jun 2010 Location: East Stroudsburg , PA Posts: 188 Drives: 08 G35 xS , 010 370Z Rep Power: 15	High capacity oil pan or oil pan spacer? High capacity oil pan or oil pan spacer, which is best? Will it hang to low under the car and can the black plastic shield go back on with a oil pan spacer or high capacity oil pan? Thanks, Alex __________________ Stillen G3-CAI , CBE , Grounding kit // Berk HFC // Eibach Sway Bars // Rear Spoiler // Kick Plates // Fog Light // Escort 9500ix-Shifters ZR4 // Gentex-51A // Next: Stillen 25 row Oil Cooler , Crank Pulley // O.Z. Botticelli III // KW-V3 Last edited by Elia Cid; 08-14-2010 at 10:37 AM.

08-17-2010, 10:36 PM	#6 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 17	I have the GTM oil spacer and everything fits good __________________ 2010 Mag Black, 6MT,

05-20-2011, 01:10 AM	#9 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Why not spend that money towards an oil cooler? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
plenum spacer/ t.b. spacer	jnaut	Intake/Exhaust	56	08-08-2013 03:57 AM
Z Cargo Capacity - Guitar players?	RoccoSiffredi	Exterior & Interior	19	07-06-2012 07:32 AM
ARC - New Large Capacity Oil Pan	SoCal 370Z	Engine & Drivetrain	14	04-06-2010 10:05 AM
Usable Fuel Capacity, how much have you used before running out?	spearfish25	Nissan 370Z General Discussions	13	07-31-2009 07:03 PM
Need ideas for a daily driver, high MPG, real high please and roomy..	Diversion	Other Vehicles	24	07-26-2009 12:12 PM

08-17-2010, 01:33 PM	#2 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 184	personally id go with the oil pan..a spacer will sit the pan about an inch lower..currently i think arc is the only one out there making a pan however its $$$..

08-17-2010, 05:54 PM	#4 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,515 Drives: 09 Nissan 370Z M6 Rep Power: 39974	I have a JWT sump spacer - and there is no problem refitting the under-engine plastic shroud .........

05-20-2011, 01:01 AM	#8 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	do you just put an extra quart of oil when doing oil changes with the gtm spacer?