Stillen 3rd Gen Intake working now, but ran into another problem

blackmagic

So I ended up getting the 3rd gen stillen intakes to work on my car but now I ran into a different problem. The service engine light is on and my drivers side window will not roll up sometimes. The car will pick up with no problem but there is the service engine, does anyone know what the problem is?

Trips

here is how to reset your windows


a local dealer can reset the error, or try once again to disconnect the neg

__________________

blackmagic

thank you so much the windows work again! It was really pissing me off lol Any suggestions how to clear the service engine light or do I need to take it to a dealer to get that done.. before I installed the stillen 3rd gen intakes I never had that light come on.

djpathfinder

So what was causing the engine RPM problem after the G3 install?

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD

AK370Z

Yes, I would like to know this as well.

Do you have a code scanner? You can buy them for really cheap these days (less than $40 on ebay). With a code scanner, you can check and delete codes. Or if you have a AutoZone nearby, they can check it for you. FREE of charge. Taking it to the dealer will probably be the most expansive option but if that's the only available one, then you gotta do what you gotta do.

Good luck.

__________________
The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post
STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q.
Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section
My Monterey Blue Z ll My Exhaust --> My Intake --> G3
Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE
Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

Seb@SZ

See if you can get a local parts store to check\clear the code. Some offer this.

__________________
Z Car Specialists
www.specialtyz.com
Blog
http://specialtyz.com/blog/

blackmagic

I had both MAF's plugged in but i forgot about the other two sensors....it was stupid but i was working on the car late last night couldnt see. I worked on it this morning and it took me 5 minutes to figure out what the hell went wrong. I had the window issue earlier, but I got it fixed thanks to you guys. The only problem i have no is a service engine light I don't know why it is still on and again i tried to disconnect the negative terminal to reset the ecu but no luck I think I am gonna take it to nissan and have them run codes and see what they can do for me....because I have no idea what's going on.

Josh@STILLEN

Good to hear you found the issue on the install.. and the window fix as well. I've sent a PM, but the advise you're getting on the codes is dead on.

SES or CEL lights can 'stick' and take some engine driving cycles to reset themselves, or you can definitely hit one of the local autoparts stores like AutoZone who will do a free engine code diagnosis, or my ultimate recommendation would be to find a cheap scanner to check and reset codes, and is super handy to just have.

As you move forward with your build and have a tuning option, a lot of those devices also offer code scanning/reset as part of the package.

I guess what I'm saying is dont necessarily run to Nissan just to check the codes, as they will inevitably charge you too much, potentially more than getting a cheap code reader, just to find a sticky code for the problem you've already identified. If the car is running fine now with the sensors in place, it will reset itself.

Sorry I didn't see these threads earlier, glad the install is in place.

So now that it's functioning as intended.. thoughts after the install?

onzedge

Disconnecting the battery sometimes will put the ECU in "back up" mode and will cause the light to come on. This happened with mine because I bought a showroom z and its battery was not connected. The dealer said "give it about 50 miles and it will reset itself". It did not. A code reader does the trick.

Also Autozone does not read codes anymore -- at least not around Sacramento. Something about CARB-blah-blah or insurance-blah-blah.

Anyway get a reader like everyone suggested. They come in handy and pay for themselves fast.

370Zsteve

Sound advice.

I'm gonna jump in here because I just installed Gen3's last night/this morning (had to stop due to torrential rain and darkness )

I took the Z for a 40-mile run to shake things out, up until about 20 miles there was a bit of hesitation at about 1500rpm but as the ECU learned (I'd say around 30 miles, just as Stillen advises) things smoothed right out.

I LOVE the sound! And oh my the butt-dyno is giving 2-thumbs-up, it feels like there is a massive power gain above 5K. Gonna do another dyno run later in the week.

And no CELs! I'm not even sure what the OP meant by "2 more sensors" either? The only thing I unplugged were the MAFS.

__________________
SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

blackmagic

I took it to the dealership the cleared the code, the intakes work and sound great. I appreciate everyone's input and I solved all of the issues thanks to you guys.

370Zsteve

Excellent! You'll find much more info here by becoming a Premium Member!

__________________
SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

Soygen

Anyone have any recommendations on these "cheap code scanners"? There's a ton on Ebay.

toner123

AutoZone.com | OBDIIcodereaderfor1996andnewervehicles | Actron

My dad bought this one at autozone, well to say i thought it was pretty cool. reads the code and can clear it. it also came with a program you can load up on your computer and you put in the make model year engine type and type in the code and it tells you what it means. It also gave the three highest possibilities on to where that code came from.
Frank