I need help with fiding a VLSD Pumpkin that would work for me..
 

I have been searching for a rear end pumpkin with VLSD to swap for my base model. I have found several priced around 400-600 but am not completely sure on which one i have to get..

I have a shop that has a 2007 G35S Sedan 6m and AT Sedan pumpkins.... It has the same geat ratio as ours in the 6m pumpkin, But its still in the g35 sedan that used the 3.5 but looks exactly like the g37 sedan. Anyone know if the the pumpkin will be the same ? Or will I need new output shafts ?

That shop has a bunch of sedan g35's , a few 07+ 350zs , and a few auto g37 sedans..

Also, Do the G37s come standard with VLSD ? or only sport ? Not that it would be hard because they could spin the output shafts to see if its Vlsd or not, but I'm just curious for my knowledge.


If i can get an auto VLSD pumkin that would be able to work with limited extra parts, that would be fine too, I would just be forced to get 4.08s....

so the main question here is " which vlsd pumpkins out of which cars will bolt on to my 370z base with the open diff ? " If the gear ratio is the same on the one I find I will stick with it, if its different I will upgrade to 4.08s before I install it...

thanks and sorry if this is confusing...

does it have to be a whole pumpkin?i may still have my viscous unit and the longer stub shaft you need lying around in a box after i put in my quaife.

hey, i sent u a pm..... or two .... lmk

I am def very interested.