Can the 370Z be push started?

tjlazer · 04-05-2010, 11:52 AM

I need to know asap, can a 6MT 370Z be push started if it won't start? Its getting 12V and I think there might be a problem with the ECU/IPDM

AK370Z · 04-05-2010, 11:59 AM

NO! Please DO NOT ATTEMPT this. You will damage your 370Z. It clearly states in the manual not to push start.

Xan · 04-05-2010, 12:02 PM

I would try an ECU reset, maybe it will help and the car might start again.

Regardless of the manual, I would even attempt to drive it if it doesn't start on it's own.
Who knows what you break in the process...

vipor · 04-05-2010, 12:25 PM

AK, that notice only refers to the AT models

tjlazer · 04-05-2010, 12:31 PM

Well im getting it towed...

AK370Z · 04-05-2010, 12:33 PM

Quote:

Originally Posted by vipor

AK, that notice only refers to the AT models

I think the top line is for all models then below is the warning for Automatic models. Wouldn't the steering will be locked? Isn't the fuel injectors on the Z are electronic?

I mean, I want to know this as well but I would be really upset if the OP does big damage to his car.

Quote:

Originally Posted by tjlazer

Well im getting it towed...

Good choice.

Caravanshaka · 04-05-2010, 12:46 PM

if you put the ignition to the on position everything should function normally if you can push start it. If it's under warranty then don't bother and let them pay for a towtruck to bring it into the dealership.

FastJew · 04-05-2010, 12:51 PM

I don't see how push starting a 6MT could cause any damage. You are just turning the flywheel with the clutch instead of the starter. Just make sure the ingnition is in the ON position (tap start twice without clutch depressed).

I kinda push started mine the other day just out of curiousity. With all the stuck throttle stories going around I was wondering how you would shut the car off in that situation. Turns out you must hold the start button for almost 3 seconds to get the engine to shutoff while rolling. Then simply tap the button twice back into the ON position put the car in the appropriate gear for your speed and let the clutch out. Voila, push start with no issues.

Now that being said if you have never done anything like this before DON'T TRY IT ON YOUR Z. There are several things that can go wrong if you are unfamiliar with push starting. If the vehicle is going too fast you can easily over rev the engine and cause damage (not likely pushing by hand). If your engine is not functioning properly the excessive turning over of a cold engine could damage things as well.

For me, If I knew the only problem with my car was a low battery or bad starter I would not hesitate to push start.

AK370Z · 04-05-2010, 01:08 PM

Quote:

Originally Posted by FastJew

I kinda push started mine the other day just out of curiousity. With all the stuck throttle stories going around I was wondering how you would shut the car off in that situation. Turns out you must hold the start button for almost 3 seconds to get the engine to shutoff while rolling. Then simply tap the button twice back into the ON position put the car in the appropriate gear for your speed and let the clutch out. Voila, push start with no issues.

Yes, that's the emergency turn off procedure. Good to know.

steveg78 · 04-05-2010, 01:17 PM

If you turn off while rolling does the steering wheel lock until you push the start button twice to ON? That would be SCARY!

vipor · 04-05-2010, 02:04 PM

Quote:

Originally Posted by steveg78

If you turn off while rolling does the steering wheel lock until you push the start button twice to ON? That would be SCARY!

Steering wheel doesn't lock until you open your door.

Zsteve · 04-05-2010, 02:05 PM

but they are all push started. Push the start button they all start, except that one guy on here that cant get his started.

AK370Z · 04-05-2010, 02:08 PM

Quote:

Originally Posted by Zsteve

but they are all push started. Push the start button they all start, except that one guy on here that cant get his started.

When OP said push started, he meant physically pushing the whole car in neutral and the pop into 1st or 2nd gear. 6 speed cars CAN be started like this.

Zsteve · 04-05-2010, 04:43 PM

Quote:

Originally Posted by AK370Z

When OP said push started, he meant physically pushing the whole car in neutral and the pop into 1st or 2nd gear. 6 speed cars CAN be started like this.

yea I kno, Im at work and bored so Im in a wierd sense of humor way right now.

370Ztune · 04-05-2010, 06:55 PM

Quote:

Originally Posted by Zsteve

yea I kno, Im at work and bored so Im in a wierd sense of humor way right now.

haha

04-05-2010, 11:52 AM	#1 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Can the 370Z be push started? I need to know asap, can a 6MT 370Z be push started if it won't start? Its getting 12V and I think there might be a problem with the ECU/IPDM __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

04-05-2010, 11:59 AM	#2 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	NO! Please DO NOT ATTEMPT this. You will damage your 370Z. It clearly states in the manual not to push start. __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

04-05-2010, 12:02 PM	#3 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 24	I would try an ECU reset, maybe it will help and the car might start again. Regardless of the manual, I would even attempt to drive it if it doesn't start on it's own. Who knows what you break in the process... __________________

04-05-2010, 12:25 PM	#4 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	AK, that notice only refers to the AT models __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

04-05-2010, 12:31 PM	#5 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Well im getting it towed... __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

04-05-2010, 12:46 PM	#7 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	if you put the ignition to the on position everything should function normally if you can push start it. If it's under warranty then don't bother and let them pay for a towtruck to bring it into the dealership. __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

04-05-2010, 12:51 PM	#8 (permalink)
FastJew Base Member Join Date: Oct 2009 Location: Denton, TX Posts: 58 Drives: 2009/370z/TS/6MT Rep Power: 16	I don't see how push starting a 6MT could cause any damage. You are just turning the flywheel with the clutch instead of the starter. Just make sure the ingnition is in the ON position (tap start twice without clutch depressed). I kinda push started mine the other day just out of curiousity. With all the stuck throttle stories going around I was wondering how you would shut the car off in that situation. Turns out you must hold the start button for almost 3 seconds to get the engine to shutoff while rolling. Then simply tap the button twice back into the ON position put the car in the appropriate gear for your speed and let the clutch out. Voila, push start with no issues. Now that being said if you have never done anything like this before DON'T TRY IT ON YOUR Z. There are several things that can go wrong if you are unfamiliar with push starting. If the vehicle is going too fast you can easily over rev the engine and cause damage (not likely pushing by hand). If your engine is not functioning properly the excessive turning over of a cold engine could damage things as well. For me, If I knew the only problem with my car was a low battery or bad starter I would not hesitate to push start. __________________ 09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next 06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads

04-05-2010, 01:17 PM	#10 (permalink)
steveg78 Track Member Join Date: Apr 2009 Location: MD Posts: 569 Drives: 09 370Z PG M6 +Sport Rep Power: 17	If you turn off while rolling does the steering wheel lock until you push the start button twice to ON? That would be SCARY!

04-05-2010, 02:05 PM	#12 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	but they are all push started. Push the start button they all start, except that one guy on here that cant get his started. __________________ 2010 LS3 C6 Silver coupe corvette

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
question about push button start...	TheSnakeJake	Nissan 370Z General Discussions	15	03-09-2010 01:41 AM
TSB: 2009 nissan 370z coupe; rear hatch will not open on first push of release button	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	1	02-08-2010 11:32 PM
Getting started	HT Rambler	Audio & Video	23	12-04-2009 10:50 AM
Stand behind your car and push down on the hatch.	shesha	Nissan 370Z General Discussions	18	09-14-2009 04:57 AM
question about the push start button.	juan05	Nissan 370Z General Discussions	26	08-28-2009 03:28 AM