Dyno Results

TonyBPD · 03-20-2010, 03:48 PM

Well the Z was dynoed today and I have to say that I'm disappointed. I havent studied each and every dyno result from everyone on this sight but I do feel that mine are quite low.

With that being said, its weird because my car totally runs its *** off. It really pulls like crazy and I could not be happier with its performance. I love the car.

My car is an 09 Base 6MT with about 5xxx.xx miles. Mods are K&N drop ins and ARK Exhaust.

All pulls were in 5th gear.

1st Run - 256.02 - 232.09
2nd Run - 275.29 - 235.81
3rd Run - 252.88 - 233.85

The runs were done on a Dynojet. Temp - 56 degrees

I will post the graphs later on.

Thoughts/comments?

sofa_king · 03-20-2010, 04:08 PM

Dam, why was there such a huge jump in run 2...then it died down again.

TonyBPD · 03-20-2010, 04:11 PM

1st run was done at 8:55, 2nd at 9:02 and 3rd at 9:05. She was HOT after that third run!

Chriz · 03-20-2010, 04:11 PM

That is a big difference between the 1st/3rd and 2nd run. Maybe not as accurate as you might think. There could be hope that your Z makes more power!

TonyBPD · 03-20-2010, 04:17 PM

Im no dyno expert by any means. Does a dyno need to be warmed up? I was the first of 5 cars done today.

Kastley85891 · 03-20-2010, 06:51 PM

Why 5th gear?

TheSnakeJake · 03-20-2010, 07:29 PM

Quote:

Originally Posted by TonyBPD

Im no dyno expert by any means. Does a dyno need to be warmed up? I was the first of 5 cars done today.

no, that should not affect the dyno measurments. the big jump in power between the pulls is odd though... it is possible that the dyno operator changed some parameters between the pulls.

is 5th gear 1:1 in these cars? i know that in my '03 cobra, all dyno pulls were done in 4th...

TonyBPD · 03-20-2010, 07:58 PM

From threads I searched 5th gear is the 1:1. It is possible the operator changed some things. I can understand if it were a few hp/tq off. The other cars dynoed had very minimal if any changes through runs. A Shelby GT500 (supercharged and could heatsoak) made 532/537 and 534/534. He would definitely suffer more from heat than the Z.

Chris@FsP · 03-20-2010, 08:22 PM

Are you 100% sure all 3 runs were done in 5th?

TonyBPD · 03-20-2010, 08:24 PM

Quote:

Originally Posted by FailsafePerf

Are you 100% sure all 3 runs were done in 5th?

100% sure.

Red370 · 03-20-2010, 08:35 PM

hmm... sounds a bit fishy, while all dynos will read differently, they shouldnt differ that much. I've never seen a Z on this board dyno less than 260 on a dynojet in stock form, with your exhaust you should be dynoing much higher, closer to 280-290. Yours look like mustang dyno numbers.

TonyBPD · 03-20-2010, 08:37 PM

Definitely fishy.

Snakes709 · 03-20-2010, 08:39 PM

That is weird jump in the runs. Do the american version of the Z not have a govner? i couldnt dyno my car in 5th cuz it would have hit it. So i had to dyno in 4th.

Red370 · 03-20-2010, 08:43 PM

Supposedly our 5th gear gives us the best numbers, i wouldnt know though, i've just dynoed in 4th. Still have yet to dyno with all my mods.

1slow370 · 03-21-2010, 01:07 AM

not all dynojets are inertia types they do make load cell dyno's they shop by my house has one a nice awd version at that. It would be stupid for dynojet to only make one model of dyno and never change anything, we really need to describe the dyno's we run on better. the dynojet at beyond redline here in town is one of the lowest reading dyno's i have ever seen.

03-20-2010, 03:48 PM	#1 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	Dyno Results Well the Z was dynoed today and I have to say that I'm disappointed. I havent studied each and every dyno result from everyone on this sight but I do feel that mine are quite low. With that being said, its weird because my car totally runs its *** off. It really pulls like crazy and I could not be happier with its performance. I love the car. My car is an 09 Base 6MT with about 5xxx.xx miles. Mods are K&N drop ins and ARK Exhaust. All pulls were in 5th gear. 1st Run - 256.02 - 232.09 2nd Run - 275.29 - 235.81 3rd Run - 252.88 - 233.85 The runs were done on a Dynojet. Temp - 56 degrees I will post the graphs later on. Thoughts/comments? Last edited by TonyBPD; 03-20-2010 at 04:16 PM.

03-20-2010, 04:11 PM	#4 (permalink)
Chriz Track Member Join Date: Dec 2009 Location: Houston TX Posts: 626 Drives: '10 370z PW 7AT Rep Power: 16	That is a big difference between the 1st/3rd and 2nd run. Maybe not as accurate as you might think. There could be hope that your Z makes more power! __________________ PW 7AT w/Sports Pkg Hook Em!

03-20-2010, 06:51 PM	#6 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Why 5th gear? __________________ Boosted V8 hunter 2850 lbs and 375WHP

03-20-2010, 08:35 PM	#11 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 296	hmm... sounds a bit fishy, while all dynos will read differently, they shouldnt differ that much. I've never seen a Z on this board dyno less than 260 on a dynojet in stock form, with your exhaust you should be dynoing much higher, closer to 280-290. Yours look like mustang dyno numbers. __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

03-20-2010, 08:39 PM	#13 (permalink)
Snakes709 A True Z Fanatic Join Date: Aug 2009 Location: Edmonton Posts: 1,205 Drives: 2011 Evo-X GSR Rep Power: 18	That is weird jump in the runs. Do the american version of the Z not have a govner? i couldnt dyno my car in 5th cuz it would have hit it. So i had to dyno in 4th. __________________ 2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress. Sponsor: DSG Performance

03-20-2010, 04:08 PM	#2 (permalink)
sofa_king Base Member Join Date: Jul 2009 Location: Socal Posts: 134 Drives: 09 Nissan 370z bs m6 Rep Power: 16	Dam, why was there such a huge jump in run 2...then it died down again.

03-20-2010, 04:11 PM	#3 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	1st run was done at 8:55, 2nd at 9:02 and 3rd at 9:05. She was HOT after that third run!

03-20-2010, 04:17 PM	#5 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	Im no dyno expert by any means. Does a dyno need to be warmed up? I was the first of 5 cars done today.

03-20-2010, 07:58 PM	#8 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	From threads I searched 5th gear is the 1:1. It is possible the operator changed some things. I can understand if it were a few hp/tq off. The other cars dynoed had very minimal if any changes through runs. A Shelby GT500 (supercharged and could heatsoak) made 532/537 and 534/534. He would definitely suffer more from heat than the Z.

03-20-2010, 08:22 PM	#9 (permalink)
Chris@FsP Enthusiast Member Join Date: Dec 2009 Location: Tulsa, OK Posts: 430 Drives: 2008 350Z TT Rep Power: 368	Are you 100% sure all 3 runs were done in 5th?

03-20-2010, 08:37 PM	#12 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	Definitely fishy.

03-20-2010, 08:43 PM	#14 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 296	Supposedly our 5th gear gives us the best numbers, i wouldnt know though, i've just dynoed in 4th. Still have yet to dyno with all my mods. __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

03-21-2010, 01:07 AM	#15 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	not all dynojets are inertia types they do make load cell dyno's they shop by my house has one a nice awd version at that. It would be stupid for dynojet to only make one model of dyno and never change anything, we really need to describe the dyno's we run on better. the dynojet at beyond redline here in town is one of the lowest reading dyno's i have ever seen. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk HFC dyno results	Red370	Intake/Exhaust	36	09-24-2013 04:00 PM
My Latest Dyno Results... Z33TT	Robert_K	Texas	16	08-08-2010 01:16 PM
Induction parts + ECU reflash dyno results	Phimosis	Tuning	88	03-06-2010 04:26 AM
R2C Intake, any independent dyno results yet?	drisko	Intake/Exhaust	28	03-03-2010 01:19 PM
NEW Dyno results are in....	2theextreme	Nissan 370Z General Discussions	56	08-22-2009 09:08 PM