need help

thegraylady · 02-11-2010, 10:22 AM

i have 5 grand to put in my z i wanna make it alittle quicker not sure what to do tuning wise if ther stock engine can be tuned higher but what do you guys recomend i do to it intake exhaust headers spacers wheels tires any ideas?

vipor · 02-11-2010, 10:45 AM

CAI, Tune (COBB/UpRev), Long Tube Headers (the FI intro price runs out after this weekend, 1000 vs 1250 -20% off), CBE, Pulleys, Flywheel/Clutch, LSD

Zsteve · 02-11-2010, 11:49 AM

or save as a downpayment on the SCs coming out soon

370Zsteve · 02-11-2010, 11:56 AM

Quote:

Originally Posted by Zsteve

or save as a downpayment on the SCs coming out soon

thegraylady · 02-11-2010, 01:45 PM

do you guys know anyone who can install the stillen gen 3 coi and stillen exhaust?

TARDCORE · 02-11-2010, 01:55 PM

the stillen g3 isnt as bad as it looks. I didnt even use a sawzall for the intake ducts. I used this small hand saw and it was easier than I thought. Its a soft plastic and once you break the outer shell it gets easier to cut. If you look under your car then look how the cat back is installed you will see its very easy and can be done in an hour or two.

02-11-2010, 10:22 AM	#1 (permalink)
thegraylady Base Member Join Date: Jan 2010 Location: new york Posts: 63 Drives: 09 370z gray7 speed Rep Power: 15	need help i have 5 grand to put in my z i wanna make it alittle quicker not sure what to do tuning wise if ther stock engine can be tuned higher but what do you guys recomend i do to it intake exhaust headers spacers wheels tires any ideas?

02-11-2010, 10:45 AM	#2 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	CAI, Tune (COBB/UpRev), Long Tube Headers (the FI intro price runs out after this weekend, 1000 vs 1250 -20% off), CBE, Pulleys, Flywheel/Clutch, LSD __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

02-11-2010, 11:49 AM	#3 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	or save as a downpayment on the SCs coming out soon __________________ 2010 LS3 C6 Silver coupe corvette

02-11-2010, 01:55 PM	#6 (permalink)
TARDCORE Enthusiast Member Join Date: Jul 2009 Location: San Diego Posts: 410 Drives: 2010 Solid Red 370Z Rep Power: 16	the stillen g3 isnt as bad as it looks. I didnt even use a sawzall for the intake ducts. I used this small hand saw and it was easier than I thought. Its a soft plastic and once you break the outer shell it gets easier to cut. If you look under your car then look how the cat back is installed you will see its very easy and can be done in an hour or two. __________________ XBL:EVENTYDE

02-11-2010, 01:45 PM	#5 (permalink)
thegraylady Base Member Join Date: Jan 2010 Location: new york Posts: 63 Drives: 09 370z gray7 speed Rep Power: 15	do you guys know anyone who can install the stillen gen 3 coi and stillen exhaust?