MT Shifting Question(s)

vipor

The clutch needs to be depressed maybe 30-40% of the throw to shift. Don't pound it to the floor, you're wasting fractions of seconds. You should still be able to get a shift in roughly half a second.

__________________

2009 NISMO # 0193 | QAB | Albums! | 05.04.10 (Dynojet) 291.94hp/248.28tq
Oil Cooler (DIY) | Custom Headlights | GTSPEC Braces | F.I. Long Tube Headers

Slynky

Well, I never pounded the clutch in the RSX like I mentioned above. And I don't plan on doing it in the Z. After just running up a lot of RPMs and trying to shift fast in the RSX, I began to understand it wasn't going to happen as fast as I wanted to. And, at that point, stomping and raising your foot back off the clutch as fast as possible is a total waste because the shift won't happen that quick in the first place.

I'll shoot for a controlled half-second shift once I'm through break-in.

Hmmm... break-in. 1200 miles minus the 320 I've put on it in two and a half weeks...I should be ready in about another month and a half... LOL

__________________