Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Engine Builder Needed (http://www.the370z.com/engine-drivetrain/138906-engine-builder-needed.html)

cgr406 05-28-2023 01:45 PM

Engine Builder Needed
 
Anyone know of a good quality VQ engine builder anywhere in the lower 48? I need a build that will support 700whp. I've already spoken w/ Mark @ Mazworx in FL, but am looking for additional options.

Spooler 05-28-2023 04:56 PM

A normal build won't hold over time. Been there done that before. My first engine I ran at 718whp most of the time. Headgaskets didn't hold. That engine went in the garbage. I could only save the JWT C2 cams. Your choices are very limited. You can try to experiment and see if it holds or just shell out the coin and do it right the first time. If you have a problem with the first build you will have paid for the better engine doing the 2nd build. Choice is yours.

Rusty 05-28-2023 06:18 PM

Listen to the man. He's been there and paid the price.

Spooler 05-28-2023 07:29 PM

Quote:

Originally Posted by Rusty (Post 4040536)
Listen to the man. He's been there and paid the price.

Thanks for reminding me.

Spooler 05-28-2023 08:08 PM

You can always put a stock block back in it and turn it down.

cgr406 05-29-2023 10:44 AM

Yeah, that's not gonna happen. Haha.

Sent from my SM-G998U using Tapatalk

cgr406 05-29-2023 10:46 AM

Seems like Mazworx is my best odds to hopefully only do this once. Just takes me a bit to get over the sticker shock. Thanks for the input.

Sent from my SM-G998U using Tapatalk

Spooler 05-29-2023 11:40 AM

Quote:

Originally Posted by cgr406 (Post 4040563)
Seems like Mazworx is my best odds to hopefully only do this once. Just takes me a bit to get over the sticker shock. Thanks for the input.

Sent from my SM-G998U using Tapatalk

My first built engine was right at 12k or a little higher. The Mazworx engine is not that much more.

Spooler 05-29-2023 11:41 AM

If you steam cut/ plasma cut the block at the bores, you are going to need a new junk yard engine. Been there done that before too.

cgr406 05-29-2023 12:18 PM

Yep.

Sent from my SM-G998U using Tapatalk

cgr406 05-29-2023 12:19 PM

My fingers r crossed, but we will see.

Sent from my SM-G998U using Tapatalk


All times are GMT -5. The time now is 06:56 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2