How do I install non revmatch reverse switch?

THE BULL · 12-01-2022, 11:19 AM

The sensor itself is a continental sensor and uses a common connector that goes into a Nissan/Sumitomo connector that plugs into the harness.

Transmissions with S mode have a total of 4 electrical connections

Gear position sensor (S-Mode)
Input shaft speed sensor (for S-Mode)
Neutral sensor (same )
Reverse sensor (same)

It's possible that the snagging hit the wire for the Reverse however the Gear position sensor only reads 6 positions which is why the Neutral and Reverse switches are still needed.

Fixing the Gear position sensor will not bring back the Reverse however the fix will be much cheaper since it will take the repair of that wire to get it to work.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where is the reverse light switch?	Jayhovah	Engine & Drivetrain	11	11-01-2021 03:03 PM
DIY: LED Install Reverse, License Plates, Trunk, and Map Lights	John11	DIY Section (Do-It-Yourself)	13	09-01-2014 10:11 AM
Reverse bulb install question...	MetalMattZ34	DIY Section (Do-It-Yourself)	11	10-25-2013 09:00 AM
Install: Back Up (Reverse) Camera	Master_Ly	Audio & Video	26	06-14-2012 12:52 AM
My DIY Reverse camera install linked to Garmin 5000 GPS	370Zvetlana	Audio & Video	0	03-17-2010 01:54 PM

12-01-2022, 11:19 AM	#4 (permalink)
THE BULL Base Member Join Date: Apr 2021 Location: Florida Posts: 217 Drives: G37S Rep Power: 26849	The sensor itself is a continental sensor and uses a common connector that goes into a Nissan/Sumitomo connector that plugs into the harness. Transmissions with S mode have a total of 4 electrical connections Gear position sensor (S-Mode) Input shaft speed sensor (for S-Mode) Neutral sensor (same ) Reverse sensor (same) It's possible that the snagging hit the wire for the Reverse however the Gear position sensor only reads 6 positions which is why the Neutral and Reverse switches are still needed. Fixing the Gear position sensor will not bring back the Reverse however the fix will be much cheaper since it will take the repair of that wire to get it to work.