|
So my friend and I were doing a new flywheel and clutch install. Whilst we were reinstalling the transmission we were cranking the engine from the front with a socket
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-11-2022, 11:29 AM
|
#1 (permalink) |
|
Base Member
Join Date: May 2022
Location: Ballarat Australia
Posts: 2
Drives: white 2010 370z
Rep Power: 3  |
Engine cranked backwards by hand won’t start
So my friend and I were doing a new flywheel and clutch install. Whilst we were reinstalling the transmission we were cranking the engine from the front with a socket and breaker bar so the splines would line up with the transmission. My friend lost his footing and cranked it backwards a decent amount. We thought it might be okay at the time but as soon as the job was done we went to start her up and the car was turning very confidently but we couldn’t get it to spark. After a bit of reading I think turning the crank backwards offset my cam timings hence why we can’t get it to start. Any advice on how I can go about fixing this or anything else I can look into is really appreciated.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370Z won’t start! Electrical Lockout | Little boi | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 5 | 02-27-2023 12:00 AM |
| Electronics won’t let me start my Z and OBD port and ECU won’t connect. Need a mechan | osburnrs | Engine & Drivetrain | 34 | 03-30-2020 07:43 AM |
| 370Z Nismo, engine stops and won’t start | Morfiy | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 3 | 05-01-2019 11:45 AM |
| 2012 nismo 370z won’t start after gascap change | Datnismo3323 | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 4 | 03-03-2018 12:15 AM |
| Car won’t start | Zthirty4NISMO | Nismo 370Z | 9 | 08-03-2016 06:35 PM |
1Likes
Threaded Mode
